Update readme.md

Author: nseidle

Binaries/readme.md

@@ -1,5 +1,5 @@
-This folder contains the various firmware versions for RTK Surveyor. Each binary is created by exporting a sketch binary from Arduino then combining (using the ESP32 tool) with boot_app0.bin, bootloader_qio_80m.bin, and RTK_Surveyor.ino.partitions.bin. You can update the firmware on a device by loading a binary onto the SD card and inserting it into the RTK Surveyor (see more information [here](https://learn.sparkfun.com/tutorials/sparkfun-rtk-surveyor-hookup-guide/firmware-updates-and-customization)) or by using the following CLI:
+This folder contains the various firmware versions for RTK Surveyor. Each binary is created by exporting a sketch binary from Arduino. The sketch binary is then uploaded to the ESP32 along with boot_app0.bin, RTK_Surveyor.ino.bootloader.bin, and RTK_Surveyor.ino.partitions.bin. You can update the firmware on a device by loading a binary onto the SD card and inserting it into the RTK Surveyor (see more information [here](https://learn.sparkfun.com/tutorials/sparkfun-rtk-surveyor-hookup-guide/firmware-updates-and-customization)) or by using the following CLI:
 
-esptool.exe --chip esp32 --port COM4 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size detect 0x00 RTK_Surveyor_Firmware_vxx_combined.bin
+esptool.exe --chip esp32 --port COM4 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size detect 0x1000 ./bin/RTK_Surveyor.ino.bootloader.bin 0x8000 ./bin/RTK_Surveyor.ino.partitions.bin 0xe000 ./bin/boot_app0.bin 0x10000 ./RTK_Surveyor_Firmware_vxx.bin
 
-Where *COM4* is replaced with the COM port that RTK Surveyor enumerated at and *RTK_Surveyor_Firmware_vxx_combined.bin* is the firmware you would like to load.
+Where *COM4* is replaced with the COM port that RTK Surveyor enumerated at and *RTK_Surveyor_Firmware_vxx.bin* is the firmware you would like to load.