Merge branch 'main' into release_candidate

Author: nseidle

.github/workflows/mkdocs.yml

@@ -1,6 +1,4 @@
-# Used to run mkdocs on the repo
-
-name: ci 
+name: Run mkdocs
 on:
   push:
     branches:

Binaries/batch_program.bat

@@ -11,7 +11,7 @@ if [%1]==[] goto usage
 
 esptool.exe --chip esp32 --port %2 --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size detect ^
 0x1000 ./bin/RTK_Surveyor.ino.bootloader.bin ^
-0x8000 ./bin/RTK_Surveyor.ino.partitions.bin ^
+0x8000 ./bin/RTK_Surveyor_Partitions_16MB.bin ^
 0xe000 ./bin/boot_app0.bin ^
 0x10000 ./%1
 

Binaries/bin/RTK_Surveyor.ino.partitions.bin renamed to Binaries/bin/RTK_Surveyor_Partitions_16MB.bin

@@ -1,14 +1,13 @@
 ### Subject of the issue
-Describe your issue here. If you reference a datasheet please specify which one and in which section (ie, the protocol manual, section 5.1.2). Additionally, screenshots are easy to paste into github.
+Describe your issue here. Additionally, screenshots are easy to paste into github.
 
 ### Your workbench
-* What version of RTK Surveyor firmware are you running? This can be found when the serial menu is opened (also in the settings.txt file, and in the serial output at power up).
-* Are you connected to the device over Bluetooth? What app? Are you transmitting NTRIP back to the device?
-* How is everything being powered?
+* What version of RTK firmware are you running? This can be found when the serial menu is opened (also in the settings.txt file, and in the serial output at power up).
+* What radios are you using: Bluetooth, WiFi, and/or ESP-Now? What app are you using to connect over Bluetooth? Are you transmitting NTRIP back to the device?
 * Are there any additional details that may help us help you?
 
 ### Steps to reproduce
-Tell us how to reproduce this issue. Please include a copy of your settings.txt file used on the unit.
+Tell us how to reproduce this issue. Please post any log files from serial output that may have been generated.
 
 ### Expected behavior
 Tell us what should happen

Binaries/bin/RTK_Surveyor_Partitions_4MB.bin

@@ -1,12 +1,12 @@
 # Data Logging Menu
 
-Surveyor: ![Feature Supported](https://raw.githubusercontent.com/sparkfun/SparkFun_RTK_Firmware/main/docs/img/GreenDot.png) / Express: ![Feature Supported](https://raw.githubusercontent.com/sparkfun/SparkFun_RTK_Firmware/main/docs/img/GreenDot.png) / Express Plus: ![Feature Supported](https://raw.githubusercontent.com/sparkfun/SparkFun_RTK_Firmware/main/docs/img/GreenDot.png) / Facet: ![Feature Supported](https://raw.githubusercontent.com/sparkfun/SparkFun_RTK_Firmware/main/docs/img/GreenDot.png) / Facet L-Band: ![Feature Supported](https://raw.githubusercontent.com/sparkfun/SparkFun_RTK_Firmware/main/docs/img/GreenDot.png)
+Surveyor: ![Feature Supported](img/GreenDot.png) / Express: ![Feature Supported](img/GreenDot.png) / Express Plus: ![Feature Supported](img/GreenDot.png) / Facet: ![Feature Supported](img/GreenDot.png) / Facet L-Band: ![Feature Supported](img/GreenDot.png)
 
 ## WiFi Interface
 
 Because of the nature of these controls, the AP config page is different than the terminal menu.
 
-![System Config Menu on WiFi AP Config Page](https://raw.githubusercontent.com/sparkfun/SparkFun_RTK_Firmware/main/docs/img/SparkFun RTK System Config AP Menu.png)
+![System Config Menu on WiFi AP Config Page](img/SparkFun%20RTK%20System%20Config%20AP%20Menu.png)
 
 *System Config Menu on WiFi AP Config Page*
 

Issue_Template.md

@@ -1,6 +1,6 @@
 # GNSS Menu
 
-Surveyor: ![Feature Supported](https://raw.githubusercontent.com/sparkfun/SparkFun_RTK_Firmware/main/docs/img/GreenDot.png) / Express: ![Feature Supported](https://raw.githubusercontent.com/sparkfun/SparkFun_RTK_Firmware/main/docs/img/GreenDot.png) / Express Plus: ![Feature Supported](https://raw.githubusercontent.com/sparkfun/SparkFun_RTK_Firmware/main/docs/img/GreenDot.png) / Facet: ![Feature Supported](https://raw.githubusercontent.com/sparkfun/SparkFun_RTK_Firmware/main/docs/img/GreenDot.png) / Facet L-Band: ![Feature Supported](https://raw.githubusercontent.com/sparkfun/SparkFun_RTK_Firmware/main/docs/img/GreenDot.png)
+Surveyor: ![Feature Supported](img/GreenDot.png) / Express: ![Feature Supported](img/GreenDot.png) / Express Plus: ![Feature Supported](img/GreenDot.png) / Facet: ![Feature Supported](img/GreenDot.png) / Facet L-Band: ![Feature Supported](img/GreenDot.png)
 
 The ZED-F9P is immensely configurable. The RTK device will, by default, put the ZED-F9P into the most common configuration for rover/base RTK for use with *SW Maps* and other GIS applications. 
 

docs/configure_data_logging.md

@@ -1,6 +1,6 @@
 # Messages Menu
 
-Surveyor: ![Feature Supported](https://raw.githubusercontent.com/sparkfun/SparkFun_RTK_Firmware/main/docs/img/GreenDot.png) / Express: ![Feature Supported](https://raw.githubusercontent.com/sparkfun/SparkFun_RTK_Firmware/main/docs/img/GreenDot.png) / Express Plus: ![Feature Supported](https://raw.githubusercontent.com/sparkfun/SparkFun_RTK_Firmware/main/docs/img/GreenDot.png) / Facet: ![Feature Supported](https://raw.githubusercontent.com/sparkfun/SparkFun_RTK_Firmware/main/docs/img/GreenDot.png) / Facet L-Band: ![Feature Supported](https://raw.githubusercontent.com/sparkfun/SparkFun_RTK_Firmware/main/docs/img/GreenDot.png)
+Surveyor: ![Feature Supported](img/GreenDot.png) / Express: ![Feature Supported](img/GreenDot.png) / Express Plus: ![Feature Supported](img/GreenDot.png) / Facet: ![Feature Supported](img/GreenDot.png) / Facet L-Band: ![Feature Supported](img/GreenDot.png)
 
 [![Message rate configuration boxes](https://cdn.sparkfun.com/assets/learn_tutorials/1/4/6/3/RTK_Surveyor_-_WiFi_Config_-_GNSS_Config_Messages.jpg)](https://cdn.sparkfun.com/assets/learn_tutorials/1/4/6/3/RTK_Surveyor_-_WiFi_Config_-_GNSS_Config_Messages.jpg)
 

docs/configure_gnss.md

@@ -1,14 +1,14 @@
 # PointPerfect Menu
 
-Surveyor: ![Feature Not Supported](https://raw.githubusercontent.com/sparkfun/SparkFun_RTK_Firmware/main/docs/img/RedDot.png) / Express: ![Feature Not Supported](https://raw.githubusercontent.com/sparkfun/SparkFun_RTK_Firmware/main/docs/img/RedDot.png) / Express Plus: ![Feature Not Supported](https://raw.githubusercontent.com/sparkfun/SparkFun_RTK_Firmware/main/docs/img/RedDot.png) / Facet: ![Feature Not Supported](https://raw.githubusercontent.com/sparkfun/SparkFun_RTK_Firmware/main/docs/img/RedDot.png) / Facet L-Band: ![Feature Supported](https://raw.githubusercontent.com/sparkfun/SparkFun_RTK_Firmware/main/docs/img/GreenDot.png)
+Surveyor: ![Feature Not Supported](img/RedDot.png) / Express: ![Feature Not Supported](img/RedDot.png) / Express Plus: ![Feature Not Supported](img/RedDot.png) / Facet: ![Feature Not Supported](img/RedDot.png) / Facet L-Band: ![Feature Supported](img/GreenDot.png)
 
 **Note:** This section only applies to RTK Facet *L-Band* products. Regular RTK Facet, Surveyor, Express, and Express Plus products do not have L-Band antennas or receivers built-in.
 
-![PointPerfect Menu showing Home WiFi credentials](https://raw.githubusercontent.com/sparkfun/SparkFun_RTK_Firmware/main/docs/img/SparkFun RTK PointPerfect Menu.png)
+![PointPerfect Menu showing Home WiFi credentials](img/SparkFun%20RTK%20PointPerfect%20Config.png)
 
 *Configuring PointPerfect settings over WiFi*
 
-![PointPerfect Menu showing Home WiFi credentials](https://raw.githubusercontent.com/sparkfun/SparkFun_RTK_Firmware/main/docs/img/SparkFun RTK PointPerfect Menu.png)
+![PointPerfect Menu showing Home WiFi credentials](img/SparkFun%20RTK%20PointPerfect%20Menu.png)
 
 *Configuring PointPerfect settings over serial*
 
@@ -30,7 +30,7 @@ The unit will display various messages to aid the user in obtaining keys as need
 
 Upon successful reception and decryption of PointPerfect corrections, the satellite dish icon will increase to a three-pronged icon. As the unit's fix increases the cross-hair will indicate a basic 3D solution, a double blinking cross-hair will indicate a floating RTK solution, and a solid double cross-hair will indicate a fixed RTK solution.
 
-![PointPerfect Menu showing Home WiFi credentials](https://raw.githubusercontent.com/sparkfun/SparkFun_RTK_Firmware/main/docs/img/SparkFun RTK PointPerfect Menu.png)
+![PointPerfect Menu showing Home WiFi credentials](img/SparkFun%20RTK%20PointPerfect%20Menu.png)
 
 *PointPerfect Menu showing Home WiFi credentials*
 

docs/configure_messages.md

@@ -1,6 +1,6 @@
 # Ports Menu
 
-Surveyor: ![Feature Partially Supported](https://raw.githubusercontent.com/sparkfun/SparkFun_RTK_Firmware/main/docs/img/YellowDot.png) / Express: ![Feature Supported](https://raw.githubusercontent.com/sparkfun/SparkFun_RTK_Firmware/main/docs/img/GreenDot.png) / Express Plus: ![Feature Supported](https://raw.githubusercontent.com/sparkfun/SparkFun_RTK_Firmware/main/docs/img/GreenDot.png) / Facet: ![Feature Supported](https://raw.githubusercontent.com/sparkfun/SparkFun_RTK_Firmware/main/docs/img/GreenDot.png) / Facet L-Band: ![Feature Supported](https://raw.githubusercontent.com/sparkfun/SparkFun_RTK_Firmware/main/docs/img/GreenDot.png)
+Surveyor: ![Feature Partially Supported](img/YellowDot.png) / Express: ![Feature Supported](img/GreenDot.png) / Express Plus: ![Feature Supported](img/GreenDot.png) / Facet: ![Feature Supported](img/GreenDot.png) / Facet L-Band: ![Feature Supported](img/GreenDot.png)
 
 [![Setting the baud rate of the ports](https://cdn.sparkfun.com/assets/learn_tutorials/1/8/5/7/RTK_Surveyor_-_WiFi_Config_-_Express_Ports_Config.jpg)](https://cdn.sparkfun.com/assets/learn_tutorials/1/8/5/7/RTK_Surveyor_-_WiFi_Config_-_Express_Ports_Config.jpg)
 
@@ -23,7 +23,7 @@ The **Data** port on the RTK Facet, Express, and Express Plus is very flexible.
 * **I2C** - The TX pin operates as SCL, RX pin as SDA on the I2C bus. This allows additional sensors to be connected to the I2C bus.
 * **GPIO** - The TX pin operates as a DAC-capable GPIO on the ESP32. The RX pin operates as an ADC-capable input on the ESP32. This is useful for custom applications.
 
-![Configuring the External Pulse and External Events](https://raw.githubusercontent.com/sparkfun/SparkFun_RTK_Firmware/main/docs/img/SparkFun RTK Ports PPS Config.png)
+![Configuring the External Pulse and External Events](img/SparkFun%20RTK%20Ports%20PPS%20Config.png)
 
 *Configuring the External Pulse and External Events over WiFi*