review tweaks

Author: 8BitJosh

tutorials/assembly.md

@@ -16,7 +16,7 @@ Below is a diagram of what your assembled kit should look like.
 The power board contains a connector for an external On|Off switch.
 If you do not intend to connect a switch then you must still make this connection.
 You can do this by connecting a short loop of wire between the two terminals of a suitable CamCon and placing it in the external On|Off port.
-This wire loop can be of any thickness.
+Any of the wire we provide would be suitable for this.
 
 
 ## Connections

tutorials/index.md

@@ -8,7 +8,7 @@ title: Tutorials
 
 ## Getting started
 
-The best place to start is the [kit assembly]({{ site.baseurl }}/tutorials/basic_motor_control) guide which shows you how to connect up your kit.
+The best place to start with your kit is the [kit assembly]({{ site.baseurl }}/tutorials/basic_motor_control) guide which shows you how to connect up your kit.
 This along with the [Basic Motor Control]({{ site.baseurl }}/tutorials/basic_motor_control) page should be enough to get your robot moving.