UE authentication error, and bad vrt header error

[faratell]

Hello.
I installed srsRAN_4G in Ubuntu 22.04 on pc by this config:
Intel(R) Core(TM) i7-7700K CPU @ 4.20GHz, 8 cores, 8G RAM

I use a GPS antenna connected to the GPS input of USRP b210 and locked correctly.
I have two programmed simcards and known IMSI, K, and OP enter this information in /user_db.csv (and leave other parameters as default). When trying to attach simcard to the APN, in epc show UL NAS: Authentication Failure.
Also after a while, eNB shows this error and death:
[ERROR] [STREAMER] The receive packet handler caught a value exception.
ValueError: bad vrt header or packet fragment
[ERROR] [STREAMER] recv packet demuxer unexpected sid 0x15bfed7

The EPC, eNB config files, and log files are attached.
Can anyone help me to solve this problems?

%%%%%%%%%%%%%%%
sudo ./srsenb /root/.config/srsran/enb.conf
Active RF plugins: libsrsran_rf_uhd.so
Inactive RF plugins:
--- Software Radio Systems LTE eNodeB ---

Reading configuration file /root/.config/srsran/enb.conf...

Built in Release mode using commit fa56836 on branch master.

Opening 1 channels in RF device=default with args=type=b200,clock=gpsdo
Supported RF device list: UHD file
Trying to open RF device 'UHD'
[INFO] [UHD] linux; GNU C++ version 11.3.0; Boost_107400; UHD_4.4.0.0-0ubuntu1~jammy1
[INFO] [LOGGING] Fastpath logging disabled at runtime.
Opening USRP channels=1, args: type=b200,master_clock_rate=23.04e6
[INFO] [UHD RF] RF UHD Generic instance constructed
[INFO] [B200] Detected Device: B210
[INFO] [B200] Operating over USB 3.
[INFO] [B200] Detecting internal GPSDO....
[INFO] [GPS] Found an internal GPSDO: GPSTCXO, Firmware Rev 0.929b
[INFO] [B200] Initialize CODEC control...
[INFO] [B200] Initialize Radio control...
[INFO] [B200] Performing register loopback test...
[INFO] [B200] Register loopback test passed
[INFO] [B200] Performing register loopback test...
[INFO] [B200] Register loopback test passed
[INFO] [B200] Asking for clock rate 23.040000 MHz...
[INFO] [B200] Actually got clock rate 23.040000 MHz.
Setting USRP time to 1694269355.000000s
[INFO] [MULTI_USRP] 1) catch time transition at pps edge
[INFO] [MULTI_USRP] 2) set times next pps (synchronously)
RF device 'UHD' successfully opened

==== eNodeB started ===
Type to view trace
Setting frequency: DL=2680.0 Mhz, UL=2560.0 MHz for cc_idx=0 nof_prb=50
RACH: tti=261, cc=0, pci=1, preamble=43, offset=1, temp_crnti=0x46
t
Enter t to stop trace.

           -----------------DL----------------|-------------------------UL-------------------------

rat pci rnti cqi ri mcs brate ok nok (%) | pusch pucch phr mcs brate ok nok (%) bsr
lte 1 46 6 0 0 0 0 0 0% | n/a 99.9 0 0 0 0 0 0% 0.0
lte 1 46 7 0 0 0 0 0 0% | n/a 99.9 0 0 0 0 0 0% 0.0
lte 1 46 7 0 0 0 0 0 0% | n/a 99.9 0 0 0 0 0 0% 0.0
lte 1 46 6 0 0 0 0 0 0% | n/a 99.9 0 0 0 0 0 0% 0.0
lte 1 46 6 0 0 0 0 0 0% | n/a 99.9 0 0 0 0 0 0% 0.0
lte 1 46 7 0 0 0 0 0 0% | n/a 99.9 0 0 0 0 0 0% 0.0
lte 1 46 7 0 0 0 0 0 0% | n/a 99.9 0 0 0 0 0 0% 0.0
lte 1 46 6 0 0 0 0 0 0% | n/a 99.9 0 0 0 0 0 0% 0.0
lte 1 46 7 0 0 0 0 0 0% | n/a 99.9 0 0 0 0 0 0% 0.0
lte 1 46 9 0 0 0 0 0 0% | n/a 99.9 0 0 0 0 0 0% 0.0
lte 1 46 8 0 0 0 0 0 0% | n/a 99.9 0 0 0 0 0 0% 0.0

           -----------------DL----------------|-------------------------UL-------------------------

rat pci rnti cqi ri mcs brate ok nok (%) | pusch pucch phr mcs brate ok nok (%) bsr
lte 1 46 8 0 0 0 0 0 0% | n/a 99.9 0 0 0 0 0 0% 0.0
lte 1 46 8 0 0 0 0 0 0% | n/a 99.9 0 0 0 0 0 0% 0.0
lte 1 46 7 0 0 0 0 0 0% | n/a 99.9 0 0 0 0 0 0% 0.0
lte 1 46 7 0 0 0 0 0 0% | n/a 99.9 0 0 0 0 0 0% 0.0
lte 1 46 8 0 0 0 0 0 0% | n/a 99.9 0 0 0 0 0 0% 0.0
lte 1 46 9 0 0 0 0 0 0% | n/a 99.9 0 0 0 0 0 0% 0.0
lte 1 46 n/a 0 0 0 0 0 0% | n/a n/a 0 0 0 0 0 0% 0.0
lte 1 46 8 0 0 0 0 0 0% | n/a 0.4 0 0 0 0 0 0% 0.0
lte 1 46 4 0 0 0 0 0 0% | n/a 1.1 0 0 0 0 0 0% 0.0
[ERROR] [STREAMER] The receive packet handler caught a value exception.
ValueError: bad vrt header or packet fragment
[ERROR] [STREAMER] recv packet demuxer unexpected sid 0x15bfed7
lte 1 46 n/a 0 0 0 0 0 0% | n/a n/a 0 0 0 0 0 0% 0.0
lte 1 46 n/a 0 0 0 0 0 0% | n/a n/a 0 0 0 0 0 0% 0.0

           -----------------DL----------------|-------------------------UL-------------------------

rat pci rnti cqi ri mcs brate ok nok (%) | pusch pucch phr mcs brate ok nok (%) bsr
lte 1 46 n/a 0 0 0 0 0 0% | n/a n/a 0 0 0 0 0 0% 0.0
lte 1 46 n/a 0 0 0 0 0 0% | n/a n/a 0 0 0 0 0 0% 0.0
lte 1 46 n/a 0 0 0 0 0 0% | n/a n/a 0 0 0 0 0 0% 0.0
lte 1 46 n/a 0 0 0 0 0 0% | n/a n/a 0 0 0 0 0 0% 0.0
lte 1 46 n/a 0 0 0 0 0 0% | n/a n/a 0 0 0 0 0 0% 0.0
lte 1 46 n/a 0 0 0 0 0 0% | n/a n/a 0 0 0 0 0 0% 0.0
lte 1 46 n/a 0 0 0 0 0 0% | n/a n/a 0 0 0 0 0 0% 0.0
lte 1 46 n/a 0 0 0 0 0 0% | n/a n/a 0 0 0 0 0 0% 0.0
lte 1 46 n/a 0 0 0 0 0 0% | n/a n/a 0 0 0 0 0 0% 0.0
lte 1 46 n/a 0 0 0 0 0 0% | n/a n/a 0 0 0 0 0 0% 0.0
lte 1 46 n/a 0 0 0 0 0 0% | n/a n/a 0 0 0 0 0 0% 0.0

%%%%%%%%%%
sudo srsepc /root/.config/srsran/epc.conf

Built in Release mode using commit fa56836 on branch master.

--- Software Radio Systems EPC ---

Reading configuration file /root/.config/srsran/epc.conf...
HSS Initialized.
MME S11 Initialized
MME GTP-C Initialized
MME Initialized. MCC: 0xf432, MNC: 0xff44
SPGW GTP-U Initialized.
SPGW S11 Initialized.
SP-GW Initialized.
Received S1 Setup Request.
S1 Setup Request - eNB Name: srsenb01, eNB id: 0x19b
S1 Setup Request - MCC:432, MNC:44
S1 Setup Request - TAC 7, B-PLMN 0x34f244
S1 Setup Request - Paging DRX v128
Sending S1 Setup Response
SCTP Association Shutdown. Association: 54
Deleting eNB context. eNB Id: 0x19b
Releasing UEs context
No UEs to be released
Received S1 Setup Request.
S1 Setup Request - eNB Name: srsenb01, eNB id: 0x19b
S1 Setup Request - MCC:432, MNC:44
S1 Setup Request - TAC 7, B-PLMN 0x34f244
S1 Setup Request - Paging DRX v128
Sending S1 Setup Response
SCTP Association Shutdown. Association: 56
Deleting eNB context. eNB Id: 0x19b
Releasing UEs context
No UEs to be released
Received S1 Setup Request.
S1 Setup Request - eNB Name: srsenb01, eNB id: 0x19b
S1 Setup Request - MCC:432, MNC:44
S1 Setup Request - TAC 7, B-PLMN 0x34f244
S1 Setup Request - Paging DRX v128
Sending S1 Setup Response
Initial UE message: LIBLTE_MME_MSG_TYPE_ATTACH_REQUEST
Received Initial UE message -- Attach Request
Attach request -- IMSI: 432447033333303
Attach request -- eNB-UE S1AP Id: 1
Attach request -- Attach type: 2
Attach Request -- UE Network Capabilities EEA: 11110000
Attach Request -- UE Network Capabilities EIA: 01110000
Attach Request -- MS Network Capabilities Present: true
PDN Connectivity Request -- EPS Bearer Identity requested: 0
PDN Connectivity Request -- Procedure Transaction Id: 64
PDN Connectivity Request -- ESM Information Transfer requested: true
Downlink NAS: Sending Authentication Request
UL NAS: Authentication Failure
MAC code failure
Received UE Context Release Request. MME-UE S1AP Id 1
SCTP Association Shutdown. Association: 58
Deleting eNB context. eNB Id: 0x19b

epclog.txt
enbconf.txt
enb_log.txt
ue_db.txt
epcconf.txt