Connect srsDU with srsUE through ZMQ

[newt2105]

Hi I'm trying to connect srsDU with srsUE through ZMQ but it's doesn't work.
Here is the problem:

You can see that UE cannot attaching, but when I do with gnb instead of DU/CU, it's worked.
here ís my config file:
DU:

f1ap:
  cu_cp_addr: 192.168.1.22
  bind_addr: 192.168.1.22


ru_sdr:
  device_driver: zmq                # The RF driver name.
  device_args: tx_port=tcp://127.0.0.1:2000,rx_port=tcp://127.0.0.1:2001,base_srate=11.52e6 # Optionally pass arguments to the selected RF driver.
  srate: 11.52                      # RF sample rate might need to be adjusted according to selected bandwidth.
  tx_gain: 75                       # Transmit gain of the RF might need to adjusted to the given situation.
  rx_gain: 75  

cell_cfg:
  dl_arfcn: 368500                  # ARFCN of the downlink carrier (center frequency).
  band: 3                           # The NR band.
  channel_bandwidth_MHz: 10         # Bandwith in MHz. Number of PRBs will be automatically derived.
  common_scs: 15                    # Subcarrier spacing in kHz used for data.
  plmn: "00101"                     # PLMN broadcasted by the gNB.
  tac: 7  
  pci: 1

log:
  filename: /tmp/du_log.log
  all_level: warning  

UE:

[rf]
freq_offset = 0
tx_gain = 50
rx_gain = 40
srate = 11.52e6
nof_antennas = 1

device_name = zmq
device_args = tx_port=tcp://127.0.0.1:2001,rx_port=tcp://127.0.0.1:2000,base_srate=11.52e6

[rat.eutra]
dl_earfcn = 2850
nof_carriers = 0

[rat.nr]
bands = 3
nof_carriers = 1

[pcap]
enable = none
mac_filename = /tmp/ue_mac.pcap
mac_nr_filename = /tmp/ue_mac_nr.pcap
nas_filename = /tmp/ue_nas.pcap

[log]
all_level = info
phy_lib_level = none
all_hex_limit = 32
filename = /tmp/ue.log
file_max_size = -1

[usim]
mode = soft
algo = milenage
opc  = 63BFA50EE6523365FF14C1F45F88737D
k    = 00112233445566778899aabbccddeeff
imsi = 001010123456780
imei = 353490069873319

[rrc]
release = 15
ue_category = 4

[nas]
apn = srsapn
apn_protocol = ipv4

[gw]
netns = ue1
ip_devname = tun_srsue
ip_netmask = 255.255.255.0

[gui]
enable = false

And here is DU log:

UE log:

How can I solve this problem? Thanks

[pgawlowicz]

please try with:

cell_cfg:
  dl_arfcn: 368500                  # ARFCN of the downlink carrier (center frequency).
  band: 3                           # The NR band.
  channel_bandwidth_MHz: 10         # Bandwith in MHz. Number of PRBs will be automatically derived.
  common_scs: 15                    # Subcarrier spacing in kHz used for data.
  plmn: "00101"                     # PLMN broadcasted by the gNB.
  tac: 7                            # Tracking area code (needs to match the core configuration).
  pdcch:
    common:
      ss0_index: 0                  # Set search space zero index to match srsUE capabilities
      coreset0_index: 12            # Set search CORESET Zero index to match srsUE capabilities
    dedicated:
      ss2_type: common              # Search Space type, has to be set to common
      dci_format_0_1_and_1_1: false # Set correct DCI format (fallback)
  prach:
    prach_config_index: 1           # Sets PRACH config to match what is expected by srsUE