srsRAN_Project 5G SA COTS UE NOT Registering -Quectel RM500q

[SAIRISAN123]

I have done all configuration and I am using B210 and I added Slicing part too. But RM500q not registering to network. I have added the APN to the RM500q with AT command. But why this not connecting? Anyone help.

I already tested 4G and 5G UERANSIM successfully.

[pgawlowicz]

could you provide ngap pcap?

[pgawlowicz]

could you share your gnb config as well?

[SAIRISAN123]

gNB and Slicing config.tar.gz

I have added my gNodeB , Slicing , and NF config sample files. I am using sst 2 and sd 2

[SAIRISAN123]

@pgawlowicz here is my subscriber Information

[pgawlowicz]

it should be correct. Could you provide also gnb logs?

[SAIRISAN123]

Logs.zip

I have added gNB log and Other Core network sample log

No any response regarding UE connection in gNB log.

[pgawlowicz]

could you provide gnb logs, the file is at /tmp/gnb.log

[SAIRISAN123]

GNB logs.zip

I have added my gnb logs

[pgawlowicz]

the gnb log does not contain any UE attach attempt. Did you try to connect the UE?

[SAIRISAN123]

gnB log.tar.gz

Sorry for that. Now I have added the two gnB log files captures.

[pgawlowicz]

Still, there is no UE attach attempt in this log. but also there is a lot of RF issues: Real-time failure in RF, you first need to solve those. You might try to run this script: https://github.com/srsran/srsRAN_Project/blob/main/scripts/srsran_performance
to put the host CPU in the performance mode.

[SAIRISAN123]

Hi @pgawlowicz I have connected now samsung s8 plus tablet. Like you said, not issue with config. I have re installed open5gs. It worked fine.

[fahad-ece]

[SAIRISAN123]

Hi @ff187 I am using linux. first you need to make your quectel to support your APN. Install minicom and use "AT+CGDCONT=1,"IP","srsran" command to do that. here srsran is your APN. you will receive OK as ACK. try this . if this didn't work. send the image of amf status like first image I have posted here.

[chonghua1]

Hi @ff187 I am using linux. first you need to make your quectel to support your APN. Install minicom and use "AT+CGDCONT=1,"IP","srsran" command to do that. here srsran is your APN. you will receive OK as ACK. try this . if this didn't work. send the image of amf status like first image I have posted here.

Hi @SAIRISAN123, could you please share how to set the slice config at Quectel module?