Merge #197

197: Enable the voltage regulator overdrive r=therealprof a=birkenfeld

for MCUs that support overclocking to 180 MHz.  The reference manual
states that this can be done while waiting for PLL lock.

Fixes #196

Co-authored-by: Georg Brandl <[email protected]>

Author: bors[bot]

CHANGELOG.md

@@ -15,6 +15,7 @@ and this project adheres to [Semantic Versioning](http://semver.org/).
 - Move SDIO card power handling to its own function.
 - [breaking-change] Add a 2 ms delay after changing SDIO card power setting.
 - [breaking-change] Changed sdio::{read, write}_block buf argument to &[u8; 512].
+- Voltage regulator overdrive is enabled where supported and required for selected HCLK.
 
 ### Added
 

src/rcc.rs

@@ -349,6 +349,27 @@ impl CFGR {
             // Enable PLL
             rcc.cr.modify(|_, w| w.pllon().set_bit());
 
+            // Enable voltage regulator overdrive if HCLK is above the limit
+            #[cfg(any(
+                feature = "stm32f427",
+                feature = "stm32f429",
+                feature = "stm32f437",
+                feature = "stm32f439",
+                feature = "stm32f446",
+                feature = "stm32f469",
+                feature = "stm32f479"
+            ))]
+            if hclk > 168_000_000 {
+                // Enable clock for PWR peripheral
+                rcc.apb1enr.modify(|_, w| w.pwren().set_bit());
+
+                let pwr = unsafe { &*crate::stm32::PWR::ptr() };
+                pwr.cr.modify(|_, w| w.oden().set_bit());
+                while pwr.csr.read().odrdy().bit_is_clear() {}
+                pwr.cr.modify(|_, w| w.odswen().set_bit());
+                while pwr.csr.read().odswrdy().bit_is_clear() {}
+            }
+
             // Wait for PLL to stabilise
             while rcc.cr.read().pllrdy().bit_is_clear() {}
         }