DMA - Rename stream to channel

Author: usbalbin

examples/adc-continious-dma.rs

@@ -10,7 +10,7 @@ use crate::hal::{
         AdcClaim, ClockSource, Temperature, Vref,
     },
     delay::SYSTDelayExt,
-    dma::{config::DmaConfig, stream::DMAExt, TransferExt},
+    dma::{channel::DMAExt, config::DmaConfig, TransferExt},
     gpio::GpioExt,
     pwr::PwrExt,
     rcc::{Config, RccExt},
@@ -36,7 +36,7 @@ fn main() -> ! {
     let pwr = dp.PWR.constrain().freeze();
     let mut rcc = rcc.freeze(Config::hsi(), pwr);
 
-    let streams = dp.DMA1.split(&rcc);
+    let channels = dp.DMA1.split(&rcc);
     let config = DmaConfig::default()
         .transfer_complete_interrupt(false)
         .circular_buffer(true)
@@ -62,7 +62,7 @@ fn main() -> ! {
 
     info!("Setup DMA");
     let first_buffer = cortex_m::singleton!(: [u16; 15] = [0; 15]).unwrap();
-    let mut transfer = streams.0.into_circ_peripheral_to_memory_transfer(
+    let mut transfer = channels.0.into_circ_peripheral_to_memory_transfer(
         adc.enable_dma(AdcDma::Continuous),
         &mut first_buffer[..],
         config,

examples/adc-one-shot-dma.rs

@@ -9,7 +9,7 @@ use crate::hal::{
         AdcClaim, ClockSource, Temperature,
     },
     delay::SYSTDelayExt,
-    dma::{config::DmaConfig, stream::DMAExt, TransferExt},
+    dma::{channel::DMAExt, config::DmaConfig, TransferExt},
     gpio::GpioExt,
     pwr::PwrExt,
     rcc::{Config, RccExt},
@@ -37,7 +37,7 @@ fn main() -> ! {
     let pwr = dp.PWR.constrain().freeze();
     let mut rcc = rcc.freeze(Config::hsi(), pwr);
 
-    let mut streams = dp.DMA1.split(&rcc);
+    let mut channels = dp.DMA1.split(&rcc);
     let config = DmaConfig::default()
         .transfer_complete_interrupt(false)
         .circular_buffer(false)
@@ -61,7 +61,7 @@ fn main() -> ! {
 
     info!("Setup DMA");
     let first_buffer = cortex_m::singleton!(: [u16; 2] = [0; 2]).unwrap();
-    let mut transfer = streams.0.into_peripheral_to_memory_transfer(
+    let mut transfer = channels.0.into_peripheral_to_memory_transfer(
         adc.enable_dma(AdcDma::Single),
         &mut first_buffer[..],
         config,
@@ -77,7 +77,7 @@ fn main() -> ! {
     let (s0, adc, first_buffer) = transfer.free();
     let adc = adc.disable();
 
-    streams.0 = s0;
+    channels.0 = s0;
 
     let millivolts = adc.sample_to_millivolts(first_buffer[0]);
     info!("pa3: {}mV", millivolts);

examples/spi-dma.rs

@@ -22,8 +22,8 @@ use crate::hal::{
 
 use cortex_m_rt::entry;
 use stm32g4xx_hal as hal;
+use stm32g4xx_hal::dma::channel::DMAExt;
 use stm32g4xx_hal::dma::config::DmaConfig;
-use stm32g4xx_hal::dma::stream::DMAExt;
 use stm32g4xx_hal::dma::TransferExt;
 
 #[macro_use]
@@ -50,7 +50,7 @@ fn main() -> ! {
     let spi = dp
         .SPI1
         .spi((sclk, miso, mosi), spi::MODE_0, 400.kHz(), &mut rcc);
-    let streams = dp.DMA1.split(&rcc);
+    let channels = dp.DMA1.split(&rcc);
     let config = DmaConfig::default()
         .transfer_complete_interrupt(false)
         .circular_buffer(true)
@@ -62,10 +62,11 @@ fn main() -> ! {
         *item = index as u8;
     }
     let dma_buf = cortex_m::singleton!(: [u8; BUFFER_SIZE] = buf).unwrap();
-    let mut transfer_dma =
-        streams
-            .0
-            .into_memory_to_peripheral_transfer(spi.enable_tx_dma(), &mut dma_buf[..], config);
+    let mut transfer_dma = channels.0.into_memory_to_peripheral_transfer(
+        spi.enable_tx_dma(),
+        &mut dma_buf[..],
+        config,
+    );
     transfer_dma.start(|_spi| {});
     loop {
         delay_tim2.delay_ms(1000_u16);

examples/uart-dma-rx.rs

@@ -5,7 +5,7 @@
 
 extern crate cortex_m_rt as rt;
 
-use hal::dma::{config::DmaConfig, stream::DMAExt, TransferExt};
+use hal::dma::{channel::DMAExt, config::DmaConfig, TransferExt};
 use hal::prelude::*;
 use hal::pwr::PwrExt;
 use hal::serial::*;
@@ -30,7 +30,7 @@ fn main() -> ! {
     let pwr = dp.PWR.constrain().freeze();
     let mut rcc = rcc.freeze(rcc::Config::hsi(), pwr);
 
-    let streams = dp.DMA1.split(&rcc);
+    let channels = dp.DMA1.split(&rcc);
     let config = DmaConfig::default()
         .transfer_complete_interrupt(false)
         .circular_buffer(true)
@@ -65,7 +65,7 @@ fn main() -> ! {
 
     let (_tx, rx) = usart.split();
 
-    let mut transfer = streams.0.into_circ_peripheral_to_memory_transfer(
+    let mut transfer = channels.0.into_circ_peripheral_to_memory_transfer(
         rx.enable_dma(),
         &mut rx_buffer[..],
         config,

examples/uart-dma-tx.rs

@@ -7,7 +7,7 @@ extern crate cortex_m_rt as rt;
 
 use core::fmt::Write;
 
-use hal::dma::{config::DmaConfig, stream::DMAExt, TransferExt};
+use hal::dma::{channel::DMAExt, config::DmaConfig, TransferExt};
 use hal::prelude::*;
 use hal::pwr::PwrExt;
 use hal::serial::*;
@@ -32,7 +32,7 @@ fn main() -> ! {
     let pwr = dp.PWR.constrain().freeze();
     let mut rcc = rcc.freeze(rcc::Config::hsi(), pwr);
 
-    let streams = dp.DMA1.split(&rcc);
+    let channels = dp.DMA1.split(&rcc);
     let config = DmaConfig::default()
         .transfer_complete_interrupt(false)
         .circular_buffer(false)
@@ -65,7 +65,7 @@ fn main() -> ! {
 
     // Setup DMA for USART2 TX with dma channel 1.
     let mut transfer =
-        streams
+        channels
             .0
             .into_memory_to_peripheral_transfer(tx.enable_dma(), &mut tx_buffer[..], config);
 

src/dma.rs

@@ -1,7 +1,7 @@
 //! Direct Memory Access.
 //!
 //! [Transfer::init](struct.Transfer.html#method.init) is only implemented for
-//! valid combinations of peripheral-stream-channel-direction, providing compile
+//! valid combinations of peripheral-channel-direction, providing compile
 //! time checking.
 //!
 //! This module implements Memory To Memory, Peripheral To Memory and Memory to
@@ -17,13 +17,13 @@
 
 use core::fmt::Debug;
 
+pub mod channel; // DMA MUX // DMA1 and DMA2
 pub mod config;
 pub(crate) mod mux;
-pub mod stream; // DMA MUX // DMA1 and DMA2
 pub mod traits;
 pub mod transfer;
 
-use traits::{sealed::Bits, Direction, Stream, TargetAddress};
+use traits::{sealed::Bits, Channel, Direction, TargetAddress};
 pub use transfer::{Transfer, TransferExt};
 
 /// Errors.