system(wb0): add STM32WB0x CMSIS Drivers to v1.3.0

Included in STM32CubeWB0 FW v1.3.0

Signed-off-by: Frederic Pillon <[email protected]>

Author: fpistm

system/Drivers/CMSIS/Device/ST/STM32WB0x/Include/stm32wb05.h

@@ -0,0 +1,239 @@
+/**
+  ******************************************************************************
+  * @file    stm32wb0x.h
+  * @author  MCD Application Team
+  * @brief   CMSIS STM32WB0x Device Peripheral Access Layer Header File.
+  *
+  *          The file is the unique include file that the application programmer
+  *          is using in the C source code, usually in main.c. This file contains:
+  *           - Configuration section that allows to select:
+  *              - The STM32WB0x device used in the target application
+  *              - To use or not the peripheral's drivers in application code(i.e.
+  *                code will be based on direct access to peripheral's registers
+  *                rather than drivers API), this option is controlled by
+  *                "#define USE_HAL_DRIVER"
+  *
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2024 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+
+/** @addtogroup CMSIS
+  * @{
+  */
+
+/** @addtogroup stm32wb0x
+  * @{
+  */
+
+#ifndef __STM32WB0x_H
+#define __STM32WB0x_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif /* __cplusplus */
+
+/** @addtogroup Library_configuration_section
+  * @{
+  */
+
+/**
+  * @brief STM32 Family
+  */
+#if !defined (STM32WB0)
+#define STM32WB0
+#endif /* STM32WB0 */
+
+/* Uncomment the line below according to the target STM32WB0 device used in your
+   application
+  */
+
+#if !defined(STM32WB05) && !defined(STM32WB06) && !defined(STM32WB07) && !defined(STM32WB09)
+  /* #define STM32WB05 */   /*!< STM32WB05 Devices */
+  /* #define STM32WB06 */   /*!< STM32WB06 Devices */
+  /* #define STM32WB07 */   /*!< STM32WB07 Devices */
+  /* #define STM32WB09 */   /*!< STM32WB09 Devices */
+#endif /* !STM32WB05 && !STM32WB06 && !STM32WB07 && !STM32WB09  */
+
+/*  Tip: To avoid modifying this file each time you need to switch between these
+        devices, you can define the device in your toolchain compiler preprocessor.
+  */
+#if !defined  (USE_HAL_DRIVER)
+/**
+  * @brief Comment the line below if you will not use the peripherals drivers.
+   In this case, these drivers will not be included and the application code will
+   be based on direct access to peripherals registers
+   */
+/*#define USE_HAL_DRIVER */
+#endif /* USE_HAL_DRIVER */
+
+/**
+  * @brief CMSIS Device version number
+  */
+#define __STM32WB0x_CMSIS_VERSION_MAIN   (0x01U) /*!< [31:24] main version */
+#define __STM32WB0x_CMSIS_VERSION_SUB1   (0x03U) /*!< [23:16] sub1 version */
+#define __STM32WB0x_CMSIS_VERSION_SUB2   (0x00U) /*!< [15:8]  sub2 version */
+#define __STM32WB0x_CMSIS_VERSION_RC     (0x00U) /*!< [7:0]  release candidate */
+#define __STM32WB0x_CMSIS_DEVICE_VERSION        ((__STM32WB0x_CMSIS_VERSION_MAIN << 24)\
+                                                 |(__STM32WB0x_CMSIS_VERSION_SUB1 << 16)\
+                                                 |(__STM32WB0x_CMSIS_VERSION_SUB2 << 8 )\
+                                                 |(__STM32WB0x_CMSIS_VERSION_RC))
+
+/**
+  * @}
+  */
+
+/** @addtogroup Device_Included
+  * @{
+  */
+
+#if defined( STM32WB05) || defined( STM32WB05x)
+
+#include "stm32wb05.h" /* Header file supporting STM32WB05 */
+
+#elif defined( STM32WB06) || defined( STM32WB06x)
+
+#include "stm32wb06.h" /* Header file supporting STM32WB06 */
+
+#elif defined( STM32WB07) || defined( STM32WB07x)
+
+#include "stm32wb07.h" /* Header file supporting STM32WB07 */
+
+#elif defined( STM32WB09) || defined( STM32WB09x)
+
+#include "stm32wb09.h" /* Header file supporting STM32WB09 */
+
+#else
+
+#error "Please select first the target STM32WB0x device used in your application, for instance xx (in stm32wb0x.h file)"
+
+#endif
+#include "system_stm32wb0x.h"
+
+/**
+  * @}
+  */
+
+/** @addtogroup Exported_types
+  * @{
+  */
+typedef enum
+{
+  RESET = 0,
+  SET = !RESET
+} FlagStatus, ITStatus;
+
+typedef enum
+{
+  DISABLE = 0,
+  ENABLE = !DISABLE
+} FunctionalState;
+#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE))
+
+typedef enum
+{
+  SUCCESS = 0,
+  ERROR = !SUCCESS
+} ErrorStatus;
+
+/** @brief Booelan definition */
+typedef uint8_t BOOL;
+
+#define TRUE  ((BOOL)1U)
+#define FALSE ((BOOL)0U)
+
+/**
+  * @}
+  */
+
+
+/** @addtogroup Exported_macros
+  * @{
+  */
+#define SET_BIT(REG, BIT)     ((REG) |= (BIT))
+
+#define CLEAR_BIT(REG, BIT)   ((REG) &= ~(BIT))
+
+#define READ_BIT(REG, BIT)    ((REG) & (BIT))
+
+#define TOGGLE_BIT(REG, BIT)  ((REG) ^= (BIT))
+
+#define CLEAR_REG(REG)        ((REG) = (0x0))
+
+#define WRITE_REG(REG, VAL)   ((REG) = (VAL))
+
+#define READ_REG(REG)         ((REG))
+
+#define MODIFY_REG(REG, CLEARMASK, SETMASK)  WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK)))
+
+#define MODIFY_REG_FIELD(REG, FIELD_NAME, VAL)  MODIFY_REG(REG, FIELD_NAME##_Msk, ((VAL)<<(FIELD_NAME##_Pos))&\
+                                                           (FIELD_NAME##_Msk))
+
+/* Use of interrupt control for register exclusive access (privileged mode only) */
+/* Atomic 32-bit register access macro to set one or several bits */
+#define ATOMIC_SET_BIT(REG, BIT) \
+  do {                           \
+    uint32_t primask;            \
+    primask = __get_PRIMASK();   \
+    __set_PRIMASK(1);            \
+    SET_BIT((REG), (BIT));       \
+    __set_PRIMASK(primask);      \
+  } while(0)
+
+/* Atomic 32-bit register access macro to clear one or several bits */
+#define ATOMIC_CLEAR_BIT(REG, BIT) \
+  do {                             \
+    uint32_t primask;              \
+    primask = __get_PRIMASK();     \
+    __set_PRIMASK(1);              \
+    CLEAR_BIT((REG), (BIT));       \
+    __set_PRIMASK(primask);        \
+  } while(0)
+
+/* Atomic 32-bit register access macro to clear and set one or several bits */
+#define ATOMIC_MODIFY_REG(REG, CLEARMSK, SETMASK) \
+  do {                                            \
+    uint32_t primask;                             \
+    primask = __get_PRIMASK();                    \
+    __set_PRIMASK(1);                             \
+    MODIFY_REG((REG), (CLEARMSK), (SETMASK));     \
+    __set_PRIMASK(primask);                       \
+  } while(0)
+
+/* Atomic 16-bit register access macro to set one or several bits */
+#define ATOMIC_SETH_BIT(REG, BIT)   ATOMIC_SET_BIT(REG, BIT)
+
+/* Atomic 16-bit register access macro to clear one or several bits */
+#define ATOMIC_CLEARH_BIT(REG, BIT) ATOMIC_CLEAR_BIT(REG, BIT)
+
+/* Atomic 16-bit register access macro to clear and set one or several bits */
+#define ATOMIC_MODIFYH_REG(REG, CLEARMSK, SETMASK) ATOMIC_MODIFY_REG(REG, CLEARMSK, SETMASK)
+
+/**
+  * @}
+  */
+
+#if defined (USE_HAL_DRIVER)
+#include "stm32wb0x_hal.h"
+#endif /* USE_HAL_DRIVER */
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __STM32WB0x_H */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */