Skip to content

Commit e8887b5

Browse files
fpistmfpistm
committed
[PinMap] Add STM32WB files
Signed-off-by: Frederic.Pillon <[email protected]>
1 parent b0e9f08 commit e8887b5

File tree

18 files changed

+2361
-0
lines changed

18 files changed

+2361
-0
lines changed

‎src/genpinmap/Arduino/STM32WB55CCUx/PeripheralPins.c

Lines changed: 202 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,202 @@
1+
/*
2+
*******************************************************************************
3+
* Copyright (c) 2019, STMicroelectronics
4+
* All rights reserved.
5+
*
6+
* This software component is licensed by ST under BSD 3-Clause license,
7+
* the "License"; You may not use this file except in compliance with the
8+
* License. You may obtain a copy of the License at:
9+
* opensource.org/licenses/BSD-3-Clause
10+
*
11+
*******************************************************************************
12+
* Automatically generated from STM32WB55CCUx.xml
13+
*/
14+
#include "Arduino.h"
15+
#include "PeripheralPins.h"
16+
17+
/* =====
18+
* Note: Commented lines are alternative possibilities which are not used per default.
19+
* If you change them, you will have to know what you do
20+
* =====
21+
*/
22+
23+
//*** ADC ***
24+
25+
#ifdef HAL_ADC_MODULE_ENABLED
26+
const PinMap PinMap_ADC[] = {
27+
{PA_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC1_IN5
28+
{PA_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC1_IN6
29+
{PA_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC1_IN7
30+
{PA_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC1_IN8
31+
{PA_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC1_IN9
32+
{PA_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC1_IN10
33+
{PA_6, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC1_IN11
34+
{PA_7, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC1_IN12
35+
{PA_8, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC1_IN15
36+
{PA_9, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 16, 0)}, // ADC1_IN16
37+
{NC, NP, 0}
38+
};
39+
#endif
40+
41+
//*** No DAC ***
42+
43+
//*** I2C ***
44+
45+
#ifdef HAL_I2C_MODULE_ENABLED
46+
const PinMap PinMap_I2C_SDA[] = {
47+
{PA_10, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
48+
{PB_4, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
49+
{PB_7, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
50+
{PB_9, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
51+
{NC, NP, 0}
52+
};
53+
#endif
54+
55+
#ifdef HAL_I2C_MODULE_ENABLED
56+
const PinMap PinMap_I2C_SCL[] = {
57+
{PA_7, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
58+
{PA_9, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
59+
{PB_6, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
60+
{PB_8, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
61+
{NC, NP, 0}
62+
};
63+
#endif
64+
65+
//*** PWM ***
66+
67+
#ifdef HAL_TIM_MODULE_ENABLED
68+
const PinMap PinMap_PWM[] = {
69+
{PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
70+
{PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
71+
{PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
72+
{PA_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4
73+
{PA_5, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
74+
{PA_6, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM16, 1, 0)}, // TIM16_CH1
75+
{PA_7, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
76+
{PA_7, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM17, 1, 0)}, // TIM17_CH1
77+
{PA_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1
78+
{PA_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2
79+
{PA_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3
80+
{PA_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4
81+
{PA_15, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
82+
{PB_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
83+
{PB_6, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM16, 1, 1)}, // TIM16_CH1N
84+
{PB_7, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM17, 1, 1)}, // TIM17_CH1N
85+
{PB_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
86+
{PB_8, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM16, 1, 0)}, // TIM16_CH1
87+
{PB_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
88+
{PB_9, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM17, 1, 0)}, // TIM17_CH1
89+
{NC, NP, 0}
90+
};
91+
#endif
92+
93+
//*** SERIAL ***
94+
95+
#ifdef HAL_UART_MODULE_ENABLED
96+
const PinMap PinMap_UART_TX[] = {
97+
{PA_2, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
98+
{PA_9, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
99+
{PB_5, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
100+
{PB_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
101+
{NC, NP, 0}
102+
};
103+
#endif
104+
105+
#ifdef HAL_UART_MODULE_ENABLED
106+
const PinMap PinMap_UART_RX[] = {
107+
{PA_3, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
108+
{PA_10, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
109+
{PA_12, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
110+
{PB_7, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
111+
{NC, NP, 0}
112+
};
113+
#endif
114+
115+
#ifdef HAL_UART_MODULE_ENABLED
116+
const PinMap PinMap_UART_RTS[] = {
117+
{PA_12, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
118+
{PB_1, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
119+
{PB_3, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
120+
{NC, NP, 0}
121+
};
122+
#endif
123+
124+
#ifdef HAL_UART_MODULE_ENABLED
125+
const PinMap PinMap_UART_CTS[] = {
126+
{PA_6, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
127+
{PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
128+
{PB_4, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
129+
{NC, NP, 0}
130+
};
131+
#endif
132+
133+
//*** SPI ***
134+
135+
#ifdef HAL_SPI_MODULE_ENABLED
136+
const PinMap PinMap_SPI_MOSI[] = {
137+
{PA_7, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
138+
{PA_12, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
139+
{PB_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
140+
{NC, NP, 0}
141+
};
142+
#endif
143+
144+
#ifdef HAL_SPI_MODULE_ENABLED
145+
const PinMap PinMap_SPI_MISO[] = {
146+
{PA_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
147+
{PA_11, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
148+
{PB_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
149+
{NC, NP, 0}
150+
};
151+
#endif
152+
153+
#ifdef HAL_SPI_MODULE_ENABLED
154+
const PinMap PinMap_SPI_SCLK[] = {
155+
{PA_1, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
156+
{PA_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
157+
{PB_3, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
158+
{NC, NP, 0}
159+
};
160+
#endif
161+
162+
#ifdef HAL_SPI_MODULE_ENABLED
163+
const PinMap PinMap_SPI_SSEL[] = {
164+
{PA_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
165+
{PA_15, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
166+
{PB_2, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
167+
{NC, NP, 0}
168+
};
169+
#endif
170+
171+
//*** No CAN ***
172+
173+
//*** No ETHERNET ***
174+
175+
//*** QUADSPI ***
176+
177+
#ifdef HAL_QSPI_MODULE_ENABLED
178+
const PinMap PinMap_QUADSPI[] = {
179+
{PA_2, QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_QUADSPI)}, // QUADSPI_BK1_NCS
180+
{PA_3, QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_QUADSPI)}, // QUADSPI_CLK
181+
{PA_6, QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_QUADSPI)}, // QUADSPI_BK1_IO3
182+
{PA_7, QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_QUADSPI)}, // QUADSPI_BK1_IO2
183+
{PB_8, QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_QUADSPI)}, // QUADSPI_BK1_IO1
184+
{PB_9, QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_QUADSPI)}, // QUADSPI_BK1_IO0
185+
{NC, NP, 0}
186+
};
187+
#endif
188+
189+
//*** USB ***
190+
191+
#ifdef HAL_PCD_MODULE_ENABLED
192+
const PinMap PinMap_USB[] = {
193+
{PA_11, USB, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF10_USB)}, // USB_DM
194+
{PA_12, USB, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF10_USB)}, // USB_DP
195+
{PA_13, USB, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_USB)}, // USB_NOE
196+
{NC, NP, 0}
197+
};
198+
#endif
199+
200+
//*** No USB_OTG_FS ***
201+
202+
//*** No USB_OTG_HS ***

‎src/genpinmap/Arduino/STM32WB55CCUx/PinNamesVar.h

Lines changed: 31 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,31 @@
1+
/* SYS_WKUP */
2+
#ifdef PWR_WAKEUP_PIN1
3+
SYS_WKUP1 = PA_0,
4+
#endif
5+
#ifdef PWR_WAKEUP_PIN2
6+
SYS_WKUP2 = NC,
7+
#endif
8+
#ifdef PWR_WAKEUP_PIN3
9+
SYS_WKUP3 = NC,
10+
#endif
11+
#ifdef PWR_WAKEUP_PIN4
12+
SYS_WKUP4 = PA_2,
13+
#endif
14+
#ifdef PWR_WAKEUP_PIN5
15+
SYS_WKUP5 = NC,
16+
#endif
17+
#ifdef PWR_WAKEUP_PIN6
18+
SYS_WKUP6 = NC,
19+
#endif
20+
#ifdef PWR_WAKEUP_PIN7
21+
SYS_WKUP7 = NC,
22+
#endif
23+
#ifdef PWR_WAKEUP_PIN8
24+
SYS_WKUP8 = NC,
25+
#endif
26+
/* USB */
27+
#ifdef USBCON
28+
USB_DM = PA_11,
29+
USB_DP = PA_12,
30+
USB_NOE = PA_13,
31+
#endif

0 commit comments

Comments
 (0)