chore: update STM32_WPAN from Cube version v1.23.0

Signed-off-by: Frederic Pillon <[email protected]>

Author: fpistm

src/utility/STM32_WPAN/README.md

@@ -1,6 +1,6 @@
 
 ## Source
 
-[STMicroelectronics/STM32CubeWB Release v1.22.0](https://github.com/STMicroelectronics/STM32CubeWB/releases/tag/v1.22.0)
-- Application: [BLE_TransparentMode](https://github.com/STMicroelectronics/STM32CubeWB/tree/v1.22.0/Projects/P-NUCLEO-WB55.Nucleo/Applications/BLE/BLE_TransparentMode)
+[STMicroelectronics/STM32CubeWB Release v1.23.0](https://github.com/STMicroelectronics/STM32CubeWB/releases/tag/v1.23.0)
+- Application: [BLE_TransparentMode](https://github.com/STMicroelectronics/STM32CubeWB/tree/v1.23.0/Projects/P-NUCLEO-WB55.Nucleo/Applications/BLE/BLE_TransparentMode)
 

src/utility/STM32_WPAN/app_conf_default.h

@@ -1,9 +1,9 @@
 /* USER CODE BEGIN Header */
 /**
   ******************************************************************************
-  * @file    app_conf_default.h
+  * @file    app_conf.h
   * @author  MCD Application Team
-  * @brief   Default application configuration file for STM32WPAN Middleware.
+  * @brief   Application configuration file for STM32WPAN Middleware.
   ******************************************************************************
   * @attention
   *
@@ -19,42 +19,18 @@
 /* USER CODE END Header */
 
 /* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef APP_CONF_DEFAULT_H
-#define APP_CONF_DEFAULT_H
+#ifndef APP_CONF_H
+#define APP_CONF_H
 
-#if 0
 #include "hw.h"
 #include "hw_conf.h"
 #include "hw_if.h"
 #include "ble_bufsize.h"
-#endif
 
 /******************************************************************************
  * Application Config
  ******************************************************************************/
 
-/**< generic parameters ******************************************************/
-/* HCI related defines */
-
-#define ACI_HAL_SET_TX_POWER_LEVEL 0xFC0F
-#define ACI_WRITE_CONFIG_DATA_OPCODE 0xFC0C
-#define ACI_READ_CONFIG_DATA_OPCODE 0xFC0D
-#define MAX_HCI_ACL_PACKET_SIZE (sizeof(TL_PacketHeader_t) + 5 + 251)
-#define HCI_RESET 0x0C03
-
-#ifndef BLE_SHARED_MEM_BYTE_ORDER
-  #define BLE_SHARED_MEM_BYTE_ORDER  MSBFIRST
-#endif
-#define BLE_MODULE_SHARED_MEM_BUFFER_SIZE 128
-
-/**
- * Define Tx Power
- */
-#ifndef CFG_TX_POWER
-  #define CFG_TX_POWER                        (0x18) /* -0.15dBm */
-#endif
-
-#if 0
 /**
  * Define Secure Connections Support
  */
@@ -128,7 +104,6 @@
 #define CFG_FW_SUBVERSION         (1)
 #define CFG_FW_BRANCH             (0)
 #define CFG_FW_BUILD              (0)
-#endif
 
 /******************************************************************************
  * BLE Stack
@@ -137,25 +112,13 @@
  * Maximum number of simultaneous connections that the device will support.
  * Valid values are from 1 to 8
  */
-#ifndef CFG_BLE_NUM_LINK
-#ifdef STM32WB15xx
-  #define CFG_BLE_NUM_LINK            3
-#else
-  #define CFG_BLE_NUM_LINK            8
-#endif
-#endif
+#define CFG_BLE_NUM_LINK            8
 
 /**
  * Maximum number of Services that can be stored in the GATT database.
  * Note that the GAP and GATT services are automatically added so this parameter should be 2 plus the number of user services
  */
-#ifndef CFG_BLE_NUM_GATT_SERVICES
-#ifdef STM32WB15xx
-  #define CFG_BLE_NUM_GATT_SERVICES   4
-#else
-  #define CFG_BLE_NUM_GATT_SERVICES   8
-#endif
-#endif
+#define CFG_BLE_NUM_GATT_SERVICES   8
 
 /**
  * Maximum number of Attributes
@@ -164,13 +127,7 @@
  * Note that certain characteristics and relative descriptors are added automatically during device initialization
  * so this parameters should be 9 plus the number of user Attributes
  */
-#ifndef CFG_BLE_NUM_GATT_ATTRIBUTES
-#ifdef STM32WB15xx
-  #define CFG_BLE_NUM_GATT_ATTRIBUTES 30
-#else
-  #define CFG_BLE_NUM_GATT_ATTRIBUTES 68
-#endif
-#endif
+#define CFG_BLE_NUM_GATT_ATTRIBUTES 68
 
 /**
  * Maximum supported ATT_MTU size
@@ -206,16 +163,12 @@
 /**
  * Enable or disable the Extended Packet length feature. Valid values are 0 or 1.
  */
-#ifndef CFG_BLE_DATA_LENGTH_EXTENSION
-  #define CFG_BLE_DATA_LENGTH_EXTENSION   1
-#endif
+#define CFG_BLE_DATA_LENGTH_EXTENSION   1
 
 /**
  * Sleep clock accuracy in Peripheral mode (ppm value)
  */
-#ifndef CFG_BLE_PERIPHERAL_SCA
-  #define CFG_BLE_PERIPHERAL_SCA   500
-#endif
+#define CFG_BLE_PERIPHERAL_SCA   500
 
 /**
  * Sleep clock accuracy in Central mode
@@ -228,9 +181,7 @@
  * 6 : 21 ppm to 30 ppm
  * 7 : 0 ppm to 20 ppm
  */
-#ifndef CFG_BLE_CENTRAL_SCA
-  #define CFG_BLE_CENTRAL_SCA   0
-#endif
+#define CFG_BLE_CENTRAL_SCA   0
 
 /**
  * LsSource
@@ -239,27 +190,21 @@
  * - bit 1:   1: STM32WB5M Module device                             0: Other devices as STM32WBxx SOC, STM32WB1M module
  * - bit 2:   1: HSE/1024 Clock config                               0: LSE Clock config
  */
-#ifndef CFG_BLE_LS_SOURCE
-  #if defined(STM32WB5Mxx)
-    #define CFG_BLE_LS_SOURCE  (SHCI_C2_BLE_INIT_CFG_BLE_LS_NOCALIB | SHCI_C2_BLE_INIT_CFG_BLE_LS_MOD5MM_DEV | SHCI_C2_BLE_INIT_CFG_BLE_LS_CLK_LSE)
-  #else
-    #define CFG_BLE_LS_SOURCE  (SHCI_C2_BLE_INIT_CFG_BLE_LS_NOCALIB | SHCI_C2_BLE_INIT_CFG_BLE_LS_OTHER_DEV | SHCI_C2_BLE_INIT_CFG_BLE_LS_CLK_LSE)
-  #endif
+#if defined(STM32WB5Mxx)
+  #define CFG_BLE_LS_SOURCE  (SHCI_C2_BLE_INIT_CFG_BLE_LS_NOCALIB | SHCI_C2_BLE_INIT_CFG_BLE_LS_MOD5MM_DEV | SHCI_C2_BLE_INIT_CFG_BLE_LS_CLK_LSE)
+#else
+  #define CFG_BLE_LS_SOURCE  (SHCI_C2_BLE_INIT_CFG_BLE_LS_NOCALIB | SHCI_C2_BLE_INIT_CFG_BLE_LS_OTHER_DEV | SHCI_C2_BLE_INIT_CFG_BLE_LS_CLK_LSE)
 #endif
 
 /**
  * Start up time of the high speed (16 or 32 MHz) crystal oscillator in units of 625/256 us (~2.44 us)
  */
-#ifndef CFG_BLE_HSE_STARTUP_TIME
-  #define CFG_BLE_HSE_STARTUP_TIME  0x148
-#endif
+#define CFG_BLE_HSE_STARTUP_TIME  0x148
 
 /**
  * Maximum duration of the connection event when the device is in Peripheral mode in units of 625/256 us (~2.44 us)
  */
-#ifndef CFG_BLE_MAX_CONN_EVENT_LENGTH
-  #define CFG_BLE_MAX_CONN_EVENT_LENGTH  (0xFFFFFFFF)
-#endif
+#define CFG_BLE_MAX_CONN_EVENT_LENGTH  (0xFFFFFFFF)
 
 /**
  * Viterbi Mode
@@ -305,7 +250,7 @@
  *          0: LE Power Class 2-3
  * other bits: complete with Options_extension flag
  */
-#define CFG_BLE_OPTIONS  (SHCI_C2_BLE_INIT_OPTIONS_LL_ONLY | SHCI_C2_BLE_INIT_OPTIONS_WITH_SVC_CHANGE_DESC | SHCI_C2_BLE_INIT_OPTIONS_DEVICE_NAME_RW | SHCI_C2_BLE_INIT_OPTIONS_EXT_ADV | SHCI_C2_BLE_INIT_OPTIONS_CS_ALGO2 | SHCI_C2_BLE_INIT_OPTIONS_FULL_GATTDB_NVM | SHCI_C2_BLE_INIT_OPTIONS_GATT_CACHING_NOTUSED | SHCI_C2_BLE_INIT_OPTIONS_POWER_CLASS_2_3)
+#define CFG_BLE_OPTIONS  (SHCI_C2_BLE_INIT_OPTIONS_LL_HOST | SHCI_C2_BLE_INIT_OPTIONS_WITH_SVC_CHANGE_DESC | SHCI_C2_BLE_INIT_OPTIONS_DEVICE_NAME_RW | SHCI_C2_BLE_INIT_OPTIONS_EXT_ADV | SHCI_C2_BLE_INIT_OPTIONS_CS_ALGO2 | SHCI_C2_BLE_INIT_OPTIONS_FULL_GATTDB_NVM | SHCI_C2_BLE_INIT_OPTIONS_GATT_CACHING_NOTUSED | SHCI_C2_BLE_INIT_OPTIONS_POWER_CLASS_2_3)
 
 /**
  * BLE stack Options_extension flags to be configured with:
@@ -328,6 +273,13 @@
 
 #define CFG_BLE_MAX_TX_POWER            (6)
 
+/**
+* BLE stack Maximum number of created Enhanced ATT bearers to be configured
+* in addition to the number of links
+*     - Range: 0 .. 4
+*/
+#define CFG_BLE_MAX_ADD_EATT_BEARERS    (4)
+
 /**
  * BLE Rx model configuration flags to be configured with:
  * - SHCI_C2_BLE_INIT_RX_MODEL_AGC_RSSI_LEGACY
@@ -347,11 +299,7 @@
  * This parameter is considered by the CPU2 when CFG_BLE_OPTIONS has SHCI_C2_BLE_INIT_OPTIONS_EXT_ADV flag set
  */
 
-#if defined(STM32WB15xx)
-  #define CFG_BLE_MAX_ADV_SET_NBR     (3)
-#else
-  #define CFG_BLE_MAX_ADV_SET_NBR     (8)
-#endif
+#define CFG_BLE_MAX_ADV_SET_NBR     (8)
 
  /* Maximum advertising data length (in bytes)
  * Range: 31 .. 1650 with limitation:
@@ -360,11 +308,7 @@
  * This parameter is considered by the CPU2 when CFG_BLE_OPTIONS has SHCI_C2_BLE_INIT_OPTIONS_EXT_ADV flag set
  */
 
-#if defined(STM32WB15xx)
-  #define CFG_BLE_MAX_ADV_DATA_LEN    (414)
-#else
-  #define CFG_BLE_MAX_ADV_DATA_LEN    (207)
-#endif
+#define CFG_BLE_MAX_ADV_DATA_LEN    (207)
 
  /* RF TX Path Compensation Value (16-bit signed integer). Units: 0.1 dB.
   * Range: -1280 .. 1280
@@ -387,7 +331,6 @@
 
 #define CFG_BLE_CORE_VERSION   (SHCI_C2_BLE_INIT_BLE_CORE_5_4)
 
-#if 0
 /******************************************************************************
  * Transport Layer
  ******************************************************************************/
@@ -724,5 +667,4 @@ typedef enum
 
 #define CFG_OTP_END_ADRESS      OTP_AREA_END_ADDR
 
-#endif
-#endif /*APP_CONF_DEFAULT_H */
+#endif /*APP_CONF_H */

src/utility/STM32_WPAN/ble_bufsize.h

@@ -99,7 +99,7 @@
 #if (BEACON_ONLY != 0)
 #define BLE_FIXED_BUFFER_SIZE_BYTES  4200   /* Beacon only */
 #elif (LL_ONLY_BASIC != 0)
-#define BLE_FIXED_BUFFER_SIZE_BYTES  6040   /* LL only Basic*/
+#define BLE_FIXED_BUFFER_SIZE_BYTES  5960   /* LL only Basic*/
 #elif (LL_ONLY != 0)
 #define BLE_FIXED_BUFFER_SIZE_BYTES  6288   /* LL only Full */
 #elif (SLAVE_ONLY != 0)

src/utility/STM32_WPAN/hw.h

@@ -26,23 +26,14 @@ extern "C" {
 #endif
 
   /* Includes ------------------------------------------------------------------*/
-#include "stm32_def.h"
-#include "stm32wbxx_ll_bus.h"
-#include "stm32wbxx_ll_exti.h"
-#include "stm32wbxx_ll_system.h"
-#include "stm32wbxx_ll_rcc.h"
-#include "stm32wbxx_ll_ipcc.h"
-#include "stm32wbxx_ll_cortex.h"
-#include "stm32wbxx_ll_utils.h"
-#include "stm32wbxx_ll_pwr.h"
 
   /******************************************************************************
    * HW IPCC
    ******************************************************************************/
   void HW_IPCC_Enable( void );
   void HW_IPCC_Init( void );
-#define HW_IPCC_Rx_Handler IPCC_C1_RX_IRQHandler
-#define HW_IPCC_Tx_Handler IPCC_C1_TX_IRQHandler
+  void HW_IPCC_Rx_Handler( void );
+  void HW_IPCC_Tx_Handler( void );
 
   void HW_IPCC_BLE_Init( void );
   void HW_IPCC_BLE_SendCmd( void );

src/utility/STM32_WPAN/hw_ipcc.c

@@ -18,9 +18,8 @@
   */
 /* USER CODE END Header */
 
-#if defined(STM32WBxx)
 /* Includes ------------------------------------------------------------------*/
-#include "hw.h"
+#include "app_common.h"
 #include "mbox_def.h"
 #include "utilities_conf.h"
 
@@ -746,4 +745,3 @@ static void HW_IPCC_TRACES_EvtHandler( void )
 }
 
 __weak void HW_IPCC_TRACES_EvtNot( void ){};
-#endif /* STM32WBxx */

src/utility/STM32_WPAN/shci.c

@@ -17,7 +17,6 @@
  */
 
 
-#if defined(STM32WBxx)
 /* Includes ------------------------------------------------------------------*/
 #include "stm32_wpan_common.h"
 
@@ -760,4 +759,3 @@ SHCI_CmdStatus_t SHCI_GetWirelessFwInfo( WirelessFwInfo_t* pWirelessInfo )
 
   return (SHCI_Success);
 }
-#endif /* STM32WBxx */