Remove deprecated WRT_CON_FREQ.

TobiKattmann · TobiKattmann · commit 256224967e1b · 2020-12-11T21:35:51.000+01:00
diff --git a/compressible_flow/ActuatorDisk_VariableLoad/propeller_variable_load.cfg b/compressible_flow/ActuatorDisk_VariableLoad/propeller_variable_load.cfg
@@ -227,8 +227,6 @@ VOLUME_FILENAME= flow
 % Output file surface flow coefficient (w/o extension)
 SURFACE_FILENAME= surface_flow
 %
-% Writing convergence history frequency
-WRT_CON_FREQ= 1
 %
 %
 %
diff --git a/compressible_flow/Inviscid_Bump/inv_channel.cfg b/compressible_flow/Inviscid_Bump/inv_channel.cfg
@@ -211,8 +211,6 @@ SURFACE_FILENAME= surface_flow
 % Output file surface adjoint coefficient (w/o extension)
 SURFACE_ADJ_FILENAME= surface_adjoint
 %
-% Writing convergence history frequency
-WRT_CON_FREQ= 1
 % 
 % Screen output
 SCREEN_OUTPUT= (INNER_ITER, WALL_TIME, RMS_DENSITY, RMS_ENERGY, LIFT, DRAG)
diff --git a/compressible_flow/Inviscid_ONERAM6/inv_ONERAM6.cfg b/compressible_flow/Inviscid_ONERAM6/inv_ONERAM6.cfg
@@ -227,8 +227,6 @@ SURFACE_ADJ_FILENAME= surface_adjoint
 % Writing solution frequency
 OUTPUT_WRT_FREQ= 100
 %
-% Writing convergence history frequency
-WRT_CON_FREQ= 1
 %
 % Screen output
 SCREEN_OUTPUT= (INNER_ITER, WALL_TIME, RMS_DENSITY, RMS_ENERGY, LIFT, DRAG)
diff --git a/compressible_flow/Inviscid_Wedge/inv_wedge_HLLC.cfg b/compressible_flow/Inviscid_Wedge/inv_wedge_HLLC.cfg
@@ -213,8 +213,6 @@ SURFACE_FILENAME= surface_flow
 % Output file surface adjoint coefficient (w/o extension)
 SURFACE_ADJ_FILENAME= surface_adjoint
 %
-% Writing convergence history frequency
-WRT_CON_FREQ= 1
 % 
 % Screen output
 SCREEN_OUTPUT=(INNER_ITER, WALL_TIME, RMS_DENSITY, RMS_ENERGY, LIFT, DRAG)
diff --git a/compressible_flow/Laminar_Cylinder/lam_cylinder.cfg b/compressible_flow/Laminar_Cylinder/lam_cylinder.cfg
@@ -210,8 +210,6 @@ SURFACE_FILENAME= surface_flow
 % Output file surface adjoint coefficient (w/o extension)
 SURFACE_ADJ_FILENAME= surface_adjoint
 %
-% Writing convergence history frequency
-WRT_CON_FREQ= 1
 % 
 % Screen output
 SCREEN_OUTPUT= (INNER_ITER, WALL_TIME, RMS_DENSITY, RMS_ENERGY, LIFT, DRAG)
diff --git a/compressible_flow/Laminar_Flat_Plate/lam_flatplate.cfg b/compressible_flow/Laminar_Flat_Plate/lam_flatplate.cfg
@@ -226,8 +226,6 @@ SURFACE_FILENAME= surface_flow
 % Output file surface adjoint coefficient (w/o extension)
 SURFACE_ADJ_FILENAME= surface_adjoint
 %
-% Writing convergence history frequency
-WRT_CON_FREQ= 1
 % 
 % Screen output
 SCREEN_OUTPUT=(INNER_ITER, WALL_TIME, RMS_DENSITY, RMS_ENERGY, LIFT, DRAG)
diff --git a/compressible_flow/Transitional_Flat_Plate/transitional_BC_model_ConfigFile.cfg b/compressible_flow/Transitional_Flat_Plate/transitional_BC_model_ConfigFile.cfg
@@ -269,8 +269,6 @@ SURFACE_ADJ_FILENAME= surface_adjoint
 % Writing solution file frequency
 OUTPUT_WRT_FREQ= 500
 %
-% Writing convergence history frequency
-WRT_CON_FREQ= 1
 %
 % Screen output
 SCREEN_OUTPUT= (INNER_ITER, WALL_TIME, RMS_PRESSURE, RMS_NU_TILDE, LIFT, DRAG)
diff --git a/compressible_flow/Turbulent_Flat_Plate/turb_SA_flatplate.cfg b/compressible_flow/Turbulent_Flat_Plate/turb_SA_flatplate.cfg
@@ -240,8 +240,6 @@ SURFACE_ADJ_FILENAME= surface_adjoint
 % Writing solution file frequency
 OUTPUT_WRT_FREQ= 1000
 %
-% Writing convergence history frequency
-WRT_CON_FREQ= 1
 % 
 % Screen output
 SCREEN_OUTPUT= (INNER_ITER, WALL_TIME, RMS_DENSITY, RMS_NU_TILDE, LIFT, DRAG)
diff --git a/compressible_flow/Turbulent_ONERAM6/turb_ONERAM6.cfg b/compressible_flow/Turbulent_ONERAM6/turb_ONERAM6.cfg
@@ -282,8 +282,6 @@ SURFACE_FILENAME= surface_flow
 % Output file surface adjoint coefficient (w/o extension)
 SURFACE_ADJ_FILENAME= surface_adjoint
 %
-% Writing convergence history frequency
-WRT_CON_FREQ= 1
 %
 % Screen output
 SCREEN_OUTPUT= (INNER_ITER, WALL_TIME, RMS_DENSITY, RMS_NU_TILDE, LIFT, DRAG)
diff --git a/compressible_flow/UQ_NACA0012/turb_NACA0012_uq.cfg b/compressible_flow/UQ_NACA0012/turb_NACA0012_uq.cfg
@@ -242,5 +242,3 @@ SURFACE_ADJ_FILENAME= surface_adjoint
 % Writing solution file frequency
 OUTPUT_WRT_FREQ= 10000
 %
-% Writing convergence history frequency
-WRT_CON_FREQ= 1
diff --git a/compressible_flow/UQ_NACA0012/turb_NACA0012_uq_1c.cfg b/compressible_flow/UQ_NACA0012/turb_NACA0012_uq_1c.cfg
@@ -259,5 +259,3 @@ SURFACE_ADJ_FILENAME= surface_adjoint
 % Writing solution file frequency
 OUTPUT_WRT_FREQ= 10000
 %
-% Writing convergence history frequency
-WRT_CON_FREQ= 1
diff --git a/compressible_flow/UQ_NACA0012/turb_NACA0012_uq_2c.cfg b/compressible_flow/UQ_NACA0012/turb_NACA0012_uq_2c.cfg
@@ -259,5 +259,3 @@ SURFACE_ADJ_FILENAME= surface_adjoint
 % Writing solution file frequency
 OUTPUT_WRT_FREQ= 10000
 %
-% Writing convergence history frequency
-WRT_CON_FREQ= 1
diff --git a/compressible_flow/UQ_NACA0012/turb_NACA0012_uq_3c.cfg b/compressible_flow/UQ_NACA0012/turb_NACA0012_uq_3c.cfg
@@ -259,5 +259,3 @@ SURFACE_ADJ_FILENAME= surface_adjoint
 % Writing solution file frequency
 OUTPUT_WRT_FREQ= 10000
 %
-% Writing convergence history frequency
-WRT_CON_FREQ= 1
diff --git a/compressible_flow/UQ_NACA0012/turb_NACA0012_uq_p1c1.cfg b/compressible_flow/UQ_NACA0012/turb_NACA0012_uq_p1c1.cfg
@@ -259,5 +259,3 @@ SURFACE_ADJ_FILENAME= surface_adjoint
 % Writing solution file frequency
 OUTPUT_WRT_FREQ= 10000
 %
-% Writing convergence history frequency
-WRT_CON_FREQ= 1
diff --git a/compressible_flow/UQ_NACA0012/turb_NACA0012_uq_p1c2.cfg b/compressible_flow/UQ_NACA0012/turb_NACA0012_uq_p1c2.cfg
@@ -259,5 +259,3 @@ SURFACE_ADJ_FILENAME= surface_adjoint
 % Writing solution file frequency
 OUTPUT_WRT_FREQ= 10000
 %
-% Writing convergence history frequency
-WRT_CON_FREQ= 1
diff --git a/compressible_flow/Unsteady_NACA0012/unsteady_naca0012.cfg b/compressible_flow/Unsteady_NACA0012/unsteady_naca0012.cfg
@@ -211,7 +211,6 @@ VOLUME_FILENAME= flow
 % Output file surface flow coefficient (w/o extension)
 SURFACE_FILENAME= surface_flow
 %
-WRT_CON_FREQ= 1
 %
 SCREEN_OUTPUT=(TIME_ITER, INNER_ITER, DRAG, LIFT, RMS_DENSITY, REL_RMS_DENSITY,  CAUCHY_TAVG_DRAG, CAUCHY_TAVG_LIFT)
 HISTORY_OUTPUT=(ITER,REL_RMS_RES,RMS_RES, AERO_COEFF,TAVG_AERO_COEFF, CAUCHY)
diff --git a/design/Inviscid_2D_Unconstrained_NACA0012/inv_NACA0012_basic.cfg b/design/Inviscid_2D_Unconstrained_NACA0012/inv_NACA0012_basic.cfg
@@ -282,8 +282,6 @@ SURFACE_FILENAME= surface_flow
 % Output file surface adjoint coefficient (w/o extension)
 SURFACE_ADJ_FILENAME= surface_adjoint
 %
-% Writing convergence history frequency
-WRT_CON_FREQ= 1
 %
 % Screen output
 SCREEN_OUTPUT= (INNER_ITER, RMS_DENSITY, RMS_ENERGY, LIFT, DRAG)
diff --git a/design/Inviscid_3D_Constrained_ONERAM6/inv_ONERAM6_adv.cfg b/design/Inviscid_3D_Constrained_ONERAM6/inv_ONERAM6_adv.cfg
@@ -232,8 +232,6 @@ SURFACE_FILENAME= surface_flow
 % Output file surface adjoint coefficient (w/o extension)
 SURFACE_ADJ_FILENAME= surface_adjoint
 %
-% Writing convergence history frequency
-WRT_CON_FREQ= 1
 %
 % Screen output
 SCREEN_OUTPUT= (INNER_ITER, RMS_DENSITY, RMS_ENERGY, LIFT, DRAG)
diff --git a/design/Multi_Objective_Shape_Design/inv_wedge_ROE_multiobj_combo.cfg b/design/Multi_Objective_Shape_Design/inv_wedge_ROE_multiobj_combo.cfg
@@ -272,8 +272,6 @@ SURFACE_FILENAME= surface_flow
 % Output file surface adjoint coefficient (w/o extension)
 SURFACE_ADJ_FILENAME= surface_adjoint
 %
-% Writing convergence history frequency
-WRT_CON_FREQ= 1
 %
 % Read binary restart files
 READ_BINARY_RESTART = NO
diff --git a/design/Turbulent_2D_Constrained_RAE2822/turb_SA_RAE2822.cfg b/design/Turbulent_2D_Constrained_RAE2822/turb_SA_RAE2822.cfg
@@ -282,8 +282,6 @@ SURFACE_ADJ_FILENAME= surface_adjoint
 % Writing solution file frequency
 OUTPUT_WRT_FREQ= 10000
 %
-% Writing convergence history frequency
-WRT_CON_FREQ= 1
 %
 % Screen output 
 SCREEN_OUTPUT=(INNER_ITER, RMS_DENSITY, RMS_NU_TILDE, LIFT, DRAG)
diff --git a/design/Unsteady_Shape_Opt_NACA0012/unsteady_naca0012_opt.cfg b/design/Unsteady_Shape_Opt_NACA0012/unsteady_naca0012_opt.cfg
@@ -209,7 +209,6 @@ VOLUME_FILENAME= flow
 % Output file surface flow coefficient (w/o extension)
 SURFACE_FILENAME= surface_flow
 %
-WRT_CON_FREQ= 1
 %
 SCREEN_OUTPUT=(INNER_ITER, TIME_ITER, DRAG, TAVG_DRAG, LIFT, TAVG_LIFT, REL_RMS_DENSITY,REL_RMS_ADJ_DENSITY, CAUCHY)
 HISTORY_OUTPUT=(ITER, AERO_COEFF, TAVG_AERO_COEFF,TAVG_AERO_COEFF,D_TAVG_AERO_COEFF, REL_RMS_RES, REL_RMS_ADJ_AERO_COEFF)
diff --git a/incompressible_flow/Inc_Heated_Cylinders/flow_cylinder.cfg b/incompressible_flow/Inc_Heated_Cylinders/flow_cylinder.cfg
@@ -223,8 +223,6 @@ SURFACE_FILENAME= surface_flow
 % Output file surface adjoint coefficient (w/o extension)
 SURFACE_ADJ_FILENAME= surface_adjoint
 %
-% Writing convergence history frequency
-WRT_CON_FREQ= 1
 
 % ------------------------ GRID DEFORMATION PARAMETERS ------------------------%
 %
diff --git a/incompressible_flow/Inc_Heated_Cylinders/solid_cylinder1.cfg b/incompressible_flow/Inc_Heated_Cylinders/solid_cylinder1.cfg
@@ -151,8 +151,6 @@ SURFACE_FILENAME= surface_flow
 % Output file surface adjoint coefficient (w/o extension)
 SURFACE_ADJ_FILENAME= surface_adjoint
 %
-% Writing convergence history frequency
-WRT_CON_FREQ= 1
 
 % ------------------------ GRID DEFORMATION PARAMETERS ------------------------%
 %
diff --git a/incompressible_flow/Inc_Heated_Cylinders/solid_cylinder2.cfg b/incompressible_flow/Inc_Heated_Cylinders/solid_cylinder2.cfg
@@ -161,8 +161,6 @@ SURFACE_FILENAME= surface_flow
 % Output file surface adjoint coefficient (w/o extension)
 SURFACE_ADJ_FILENAME= surface_adjoint
 %
-% Writing convergence history frequency
-WRT_CON_FREQ= 1
 
 % ------------------------ GRID DEFORMATION PARAMETERS ------------------------%
 %
diff --git a/incompressible_flow/Inc_Heated_Cylinders/solid_cylinder3.cfg b/incompressible_flow/Inc_Heated_Cylinders/solid_cylinder3.cfg
@@ -161,8 +161,6 @@ SURFACE_FILENAME= surface_flow
 % Output file surface adjoint coefficient (w/o extension)
 SURFACE_ADJ_FILENAME= surface_adjoint
 %
-% Writing convergence history frequency
-WRT_CON_FREQ= 1
 
 % ------------------------ GRID DEFORMATION PARAMETERS ------------------------%
 %
diff --git a/incompressible_flow/Inc_Inviscid_Hydrofoil/inv_naca0012.cfg b/incompressible_flow/Inc_Inviscid_Hydrofoil/inv_naca0012.cfg
@@ -199,8 +199,6 @@ SURFACE_FILENAME= surface_flow
 % Writing solution file frequency
 OUTPUT_WRT_FREQ= 50
 %
-% Writing convergence history frequency
-WRT_CON_FREQ= 1
 % 
 % Screen output
 SCREEN_OUTPUT= (INNER_ITER, WALL_TIME, RMS_PRESSURE, RMS_VELOCITY-X, LIFT, DRAG)
diff --git a/incompressible_flow/Inc_Laminar_Cavity/lam_buoyancy_cavity.cfg b/incompressible_flow/Inc_Laminar_Cavity/lam_buoyancy_cavity.cfg
@@ -259,8 +259,6 @@ SURFACE_ADJ_FILENAME= surface_adjoint
 % Writing solution file frequency
 OUTPUT_WRT_FREQ= 100
 %
-% Writing convergence history frequency
-WRT_CON_FREQ= 1
 %
 % Screen output
 SCREEN_OUTPUT= (INNER_ITER, WALL_TIME, RMS_PRESSURE, RMS_TEMPERATURE, LIFT, DRAG)
diff --git a/incompressible_flow/Inc_Laminar_Flat_Plate/lam_flatplate.cfg b/incompressible_flow/Inc_Laminar_Flat_Plate/lam_flatplate.cfg
@@ -267,8 +267,6 @@ SURFACE_FILENAME= surface_flow
 % Output file surface adjoint coefficient (w/o extension)
 SURFACE_ADJ_FILENAME= surface_adjoint
 %
-% Writing convergence history frequency
-WRT_CON_FREQ= 1
 %
 % Screen output
 SCREEN_OUTPUT= (INNER_ITER, WALL_TIME,  RMS_PRESSURE, RMS_VELOCITY-X, LIFT, DRAG)
diff --git a/incompressible_flow/Inc_Laminar_Step/lam_backwardstep.cfg b/incompressible_flow/Inc_Laminar_Step/lam_backwardstep.cfg
@@ -252,8 +252,6 @@ SURFACE_FILENAME= surface_flow
 % Output file surface adjoint coefficient (w/o extension)
 SURFACE_ADJ_FILENAME= surface_adjoint
 %
-% Writing convergence history frequency
-WRT_CON_FREQ= 1
 %
 % Screen output
 SCREEN_OUTPUT=(INNER_ITER, WALL_TIME, RMS_PRESSURE, RMS_VELOCITY-X, LIFT, DRAG)
diff --git a/incompressible_flow/Inc_Turbulent_Flat_Plate/turb_flatplate.cfg b/incompressible_flow/Inc_Turbulent_Flat_Plate/turb_flatplate.cfg
@@ -260,8 +260,6 @@ SURFACE_FILENAME= surface_flow
 % Output file surface adjoint coefficient (w/o extension)
 SURFACE_ADJ_FILENAME= surface_adjoint
 %
-% Writing convergence history frequency
-WRT_CON_FREQ= 1
 % 
 % Screen output
 SCREEN_OUTPUT= (INNER_ITER, WALL_TIME, RMS_PRESSURE, RMS_NU_TILDE, LIFT, DRAG)
diff --git a/incompressible_flow/Inc_Turbulent_NACA0012/turb_naca0012.cfg b/incompressible_flow/Inc_Turbulent_NACA0012/turb_naca0012.cfg
@@ -261,8 +261,6 @@ SURFACE_FILENAME= surface_flow
 % Output file surface adjoint coefficient (w/o extension)
 SURFACE_ADJ_FILENAME= surface_adjoint
 %
-% Writing convergence history frequency
-WRT_CON_FREQ= 1
 %
 % Screen output
 SCREEN_OUTPUT = (INNER_ITER, WALL_TIME, RMS_PRESSURE, RMS_NU_TILDE, LIFT, DRAG)

Original file line number	Diff line number	Diff line change
`@@ -227,8 +227,6 @@ VOLUME_FILENAME= flow`
`227`	`227`	`% Output file surface flow coefficient (w/o extension)`
`228`	`228`	`SURFACE_FILENAME= surface_flow`
`229`	`229`	`%`
`230`		`-% Writing convergence history frequency`
`231`		`-WRT_CON_FREQ= 1`
`232`	`230`	`%`
`233`	`231`	`%`
`234`	`232`	`%`
Original file line number	Diff line number	Diff line change
`@@ -211,8 +211,6 @@ SURFACE_FILENAME= surface_flow`
`211`	`211`	`% Output file surface adjoint coefficient (w/o extension)`
`212`	`212`	`SURFACE_ADJ_FILENAME= surface_adjoint`
`213`	`213`	`%`
`214`		`-% Writing convergence history frequency`
`215`		`-WRT_CON_FREQ= 1`
`216`	`214`	`%`
`217`	`215`	`% Screen output`
`218`	`216`	`SCREEN_OUTPUT= (INNER_ITER, WALL_TIME, RMS_DENSITY, RMS_ENERGY, LIFT, DRAG)`
Original file line number	Diff line number	Diff line change
`@@ -227,8 +227,6 @@ SURFACE_ADJ_FILENAME= surface_adjoint`
`227`	`227`	`% Writing solution frequency`
`228`	`228`	`OUTPUT_WRT_FREQ= 100`
`229`	`229`	`%`
`230`		`-% Writing convergence history frequency`
`231`		`-WRT_CON_FREQ= 1`
`232`	`230`	`%`
`233`	`231`	`% Screen output`
`234`	`232`	`SCREEN_OUTPUT= (INNER_ITER, WALL_TIME, RMS_DENSITY, RMS_ENERGY, LIFT, DRAG)`
Original file line number	Diff line number	Diff line change
`@@ -213,8 +213,6 @@ SURFACE_FILENAME= surface_flow`
`213`	`213`	`% Output file surface adjoint coefficient (w/o extension)`
`214`	`214`	`SURFACE_ADJ_FILENAME= surface_adjoint`
`215`	`215`	`%`
`216`		`-% Writing convergence history frequency`
`217`		`-WRT_CON_FREQ= 1`
`218`	`216`	`%`
`219`	`217`	`% Screen output`
`220`	`218`	`SCREEN_OUTPUT=(INNER_ITER, WALL_TIME, RMS_DENSITY, RMS_ENERGY, LIFT, DRAG)`
Original file line number	Diff line number	Diff line change
`@@ -210,8 +210,6 @@ SURFACE_FILENAME= surface_flow`
`210`	`210`	`% Output file surface adjoint coefficient (w/o extension)`
`211`	`211`	`SURFACE_ADJ_FILENAME= surface_adjoint`
`212`	`212`	`%`
`213`		`-% Writing convergence history frequency`
`214`		`-WRT_CON_FREQ= 1`
`215`	`213`	`%`
`216`	`214`	`% Screen output`
`217`	`215`	`SCREEN_OUTPUT= (INNER_ITER, WALL_TIME, RMS_DENSITY, RMS_ENERGY, LIFT, DRAG)`
Original file line number	Diff line number	Diff line change
`@@ -226,8 +226,6 @@ SURFACE_FILENAME= surface_flow`
`226`	`226`	`% Output file surface adjoint coefficient (w/o extension)`
`227`	`227`	`SURFACE_ADJ_FILENAME= surface_adjoint`
`228`	`228`	`%`
`229`		`-% Writing convergence history frequency`
`230`		`-WRT_CON_FREQ= 1`
`231`	`229`	`%`
`232`	`230`	`% Screen output`
`233`	`231`	`SCREEN_OUTPUT=(INNER_ITER, WALL_TIME, RMS_DENSITY, RMS_ENERGY, LIFT, DRAG)`
Original file line number	Diff line number	Diff line change
`@@ -269,8 +269,6 @@ SURFACE_ADJ_FILENAME= surface_adjoint`
`269`	`269`	`% Writing solution file frequency`
`270`	`270`	`OUTPUT_WRT_FREQ= 500`
`271`	`271`	`%`
`272`		`-% Writing convergence history frequency`
`273`		`-WRT_CON_FREQ= 1`
`274`	`272`	`%`
`275`	`273`	`% Screen output`
`276`	`274`	`SCREEN_OUTPUT= (INNER_ITER, WALL_TIME, RMS_PRESSURE, RMS_NU_TILDE, LIFT, DRAG)`
Original file line number	Diff line number	Diff line change
`@@ -240,8 +240,6 @@ SURFACE_ADJ_FILENAME= surface_adjoint`
`240`	`240`	`% Writing solution file frequency`
`241`	`241`	`OUTPUT_WRT_FREQ= 1000`
`242`	`242`	`%`
`243`		`-% Writing convergence history frequency`
`244`		`-WRT_CON_FREQ= 1`
`245`	`243`	`%`
`246`	`244`	`% Screen output`
`247`	`245`	`SCREEN_OUTPUT= (INNER_ITER, WALL_TIME, RMS_DENSITY, RMS_NU_TILDE, LIFT, DRAG)`
Original file line number	Diff line number	Diff line change
`@@ -282,8 +282,6 @@ SURFACE_FILENAME= surface_flow`
`282`	`282`	`% Output file surface adjoint coefficient (w/o extension)`
`283`	`283`	`SURFACE_ADJ_FILENAME= surface_adjoint`
`284`	`284`	`%`
`285`		`-% Writing convergence history frequency`
`286`		`-WRT_CON_FREQ= 1`
`287`	`285`	`%`
`288`	`286`	`% Screen output`
`289`	`287`	`SCREEN_OUTPUT= (INNER_ITER, WALL_TIME, RMS_DENSITY, RMS_NU_TILDE, LIFT, DRAG)`
Original file line number	Diff line number	Diff line change
`@@ -242,5 +242,3 @@ SURFACE_ADJ_FILENAME= surface_adjoint`
`242`	`242`	`% Writing solution file frequency`
`243`	`243`	`OUTPUT_WRT_FREQ= 10000`
`244`	`244`	`%`
`245`		`-% Writing convergence history frequency`
`246`		`-WRT_CON_FREQ= 1`