Merge pull request #39 from torvalds/master

Sync update

Author: sunflower2333

CREDITS

@@ -16,6 +16,10 @@ D: One of assisting postmasters for vger.kernel.org's lists
 S: (ask for current address)
 S: Finland
 
+N: Kishon Vijay Abraham I
+E: kishon@kernel.org
+D: Generic Phy Framework
+
 N: Thomas Abraham
 E: thomas.ab@samsung.com
 D: Samsung pin controller driver

Documentation/ABI/testing/sysfs-fs-f2fs

@@ -643,6 +643,12 @@ Contact:	"Jaegeuk Kim" <jaegeuk@kernel.org>
 Description:	Shows the number of unusable blocks in a section which was defined by
 		the zone capacity reported by underlying zoned device.
 
+What:		/sys/fs/f2fs/<disk>/max_open_zones
+Date:		November 2025
+Contact:	"Yongpeng Yang" <yangyongpeng@xiaomi.com>
+Description:	Shows the max number of zones that F2FS can write concurrently when a zoned
+		device is mounted.
+
 What:		/sys/fs/f2fs/<disk>/current_atomic_write
 Date:		July 2022
 Contact:	"Daeho Jeong" <daehojeong@google.com>

Documentation/admin-guide/kernel-parameters.txt

@@ -767,6 +767,14 @@ Kernel parameters
 			nokmem -- Disable kernel memory accounting.
 			nobpf -- Disable BPF memory accounting.
 
+	check_pages=	[MM,EARLY] Enable sanity checking of pages after
+			allocations / before freeing. This adds checks to catch
+			double-frees, use-after-frees, and other sources of
+			page corruption by inspecting page internals (flags,
+			mapcount/refcount, memcg_data, etc.).
+			Format: { "0" | "1" }
+			Default: 0 (1 if CONFIG_DEBUG_VM is set)
+
 	checkreqprot=	[SELINUX] Set initial checkreqprot flag value.
 			Format: { "0" | "1" }
 			See security/selinux/Kconfig help text.

Documentation/devicetree/bindings/clock/airoha,en7523-scu.yaml

@@ -64,8 +64,6 @@ allOf:
         reg:
           minItems: 2
 
-        '#reset-cells': false
-
   - if:
       properties:
         compatible:
@@ -85,6 +83,7 @@ examples:
       reg = <0x1fa20000 0x400>,
             <0x1fb00000 0x1000>;
       #clock-cells = <1>;
+      #reset-cells = <1>;
     };
 
   - |

Documentation/devicetree/bindings/clock/armada3700-xtal-clock.txt

@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/fsl,imx8ulp-sim-lpav.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8ULP LPAV System Integration Module (SIM)
+
+maintainers:
+  - Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
+
+description:
+  The i.MX8ULP LPAV subsystem contains a block control module known as
+  SIM LPAV, which offers functionalities such as clock gating or reset
+  line assertion/de-assertion.
+
+properties:
+  compatible:
+    const: fsl,imx8ulp-sim-lpav
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 3
+
+  clock-names:
+    items:
+      - const: bus
+      - const: core
+      - const: plat
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  mux-controller:
+    $ref: /schemas/mux/reg-mux.yaml#
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - '#reset-cells'
+  - mux-controller
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8ulp-clock.h>
+
+    clock-controller@2da50000 {
+        compatible = "fsl,imx8ulp-sim-lpav";
+        reg = <0x2da50000 0x10000>;
+        clocks = <&cgc2 IMX8ULP_CLK_LPAV_BUS_DIV>,
+                 <&cgc2 IMX8ULP_CLK_HIFI_DIVCORE>,
+                 <&cgc2 IMX8ULP_CLK_HIFI_DIVPLAT>;
+        clock-names = "bus", "core", "plat";
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+
+        mux-controller {
+            compatible = "reg-mux";
+            #mux-control-cells = <1>;
+            mux-reg-masks = <0x8 0x00000200>;
+        };
+    };

Documentation/devicetree/bindings/clock/fsl,imx8ulp-sim-lpav.yaml

@@ -46,6 +46,9 @@ properties:
   "#clock-cells":
     const: 1
 
+  power-domains:
+    maxItems: 1
+
   reg:
     maxItems: 1
 

Documentation/devicetree/bindings/clock/google,gs101-clock.yaml

@@ -22,16 +22,23 @@ properties:
     const: microchip,mpfs-clkcfg
 
   reg:
-    items:
-      - description: |
-          clock config registers:
-          These registers contain enable, reset & divider tables for the, cpu,
-          axi, ahb and rtc/mtimer reference clocks as well as enable and reset
-          for the peripheral clocks.
-      - description: |
-          mss pll dri registers:
-          Block of registers responsible for dynamic reconfiguration of the mss
-          pll
+    oneOf:
+      - items:
+          - description: |
+              clock config registers:
+              These registers contain enable, reset & divider tables for the, cpu,
+              axi, ahb and rtc/mtimer reference clocks as well as enable and reset
+              for the peripheral clocks.
+          - description: |
+              mss pll dri registers:
+              Block of registers responsible for dynamic reconfiguration of the mss
+              pll
+        deprecated: true
+      - items:
+          - description: |
+              mss pll dri registers:
+              Block of registers responsible for dynamic reconfiguration of the mss
+              pll
 
   clocks:
     maxItems: 1
@@ -69,11 +76,12 @@ examples:
   - |
     #include <dt-bindings/clock/microchip,mpfs-clock.h>
     soc {
-            #address-cells = <2>;
-            #size-cells = <2>;
-            clkcfg: clock-controller@20002000 {
+            #address-cells = <1>;
+            #size-cells = <1>;
+
+            clkcfg: clock-controller@3E001000 {
                 compatible = "microchip,mpfs-clkcfg";
-                reg = <0x0 0x20002000 0x0 0x1000>, <0x0 0x3E001000 0x0 0x1000>;
+                reg = <0x3E001000 0x1000>;
                 clocks = <&ref>;
                 #clock-cells = <1>;
         };

Documentation/devicetree/bindings/clock/microchip,mpfs-clkcfg.yaml

@@ -18,6 +18,7 @@ properties:
   compatible:
     enum:
       - qcom,glymur-rpmh-clk
+      - qcom,kaanapali-rpmh-clk
       - qcom,milos-rpmh-clk
       - qcom,qcs615-rpmh-clk
       - qcom,qdu1000-rpmh-clk

Documentation/devicetree/bindings/clock/qcom,rpmhcc.yaml

@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm Video Clock & Reset Controller on SM8450
 
 maintainers:
-  - Taniya Das <quic_tdas@quicinc.com>
+  - Taniya Das <taniya.das@oss.qualcomm.com>
   - Jagadeesh Kona <quic_jkona@quicinc.com>
 
 description: |
@@ -17,6 +17,7 @@ description: |
   See also:
     include/dt-bindings/clock/qcom,sm8450-videocc.h
     include/dt-bindings/clock/qcom,sm8650-videocc.h
+    include/dt-bindings/clock/qcom,sm8750-videocc.h
 
 properties:
   compatible:
@@ -25,6 +26,7 @@ properties:
       - qcom,sm8475-videocc
       - qcom,sm8550-videocc
       - qcom,sm8650-videocc
+      - qcom,sm8750-videocc
       - qcom,x1e80100-videocc
 
   clocks:
@@ -61,6 +63,7 @@ allOf:
             enum:
               - qcom,sm8450-videocc
               - qcom,sm8550-videocc
+              - qcom,sm8750-videocc
     then:
       required:
         - required-opps