QGroundControl connection problem

[jiratto]

This is my setup

My QGroundControl can not receive any udp h264 streming but can receive telemetry data.

At GS side, I connect rasberrry pi to hdmi monitor and it can view streaming,

This is my GS settings

###############################
### GS PART
###############################

[gs_video]
# gs video is RX only, so you doesn't need to specify ldpc, stbc, gi and mcs_index
bandwidth = 20     # bandwidth 20 or 40 MHz
stats_port = 8002  # used by wfb-cli
peer = 'connect://127.0.0.1:5600'  # outgoing connection for video sink (OSD or QGC), use 224.0.0.1 for multicast streaming

[gs_mavlink]
bandwidth = 20     # bandwidth 20 or 40 MHz
short_gi = False   # use short GI or not
stbc = 1           # stbc streams: 1, 2, 3 or 0 if unused
ldpc = 1
mcs_index = 1      # mcs index
stats_port = 8001  # used by wfb-cli

# Uncomment and set QGroundControl address
peer = 'connect://192.168.1.1:14550'

# OSD
mirror = 'connect://127.0.0.1:14551'

[gs_tunnel]
bandwidth = 20     # bandwidth 20 or 40 MHz
short_gi = False   # use short GI or not
stbc = 1           # stbc streams: 1, 2, 3 or 0 if unused
ldpc = 1
mcs_index = 1      # mcs index
stats_port = 8003  # used by wfb-cli

Thank you

[jiratto]

addition information, I used raspi image both gs and drone side from this repository.