[jetson orin] install from latest git code failed with "error: invalid command 'bdist_deb'"

[lida2003]

I have installed 8812au driver, which is wlan1.

$ ethtool -i wlan1
driver: rtl88xxau_wfb
version: 5.10.192-tegra
firmware-version:
expansion-rom-version:
bus-info: 1-2.1:1.0
supports-statistics: no
supports-test: no
supports-eeprom-access: no
supports-register-dump: no
supports-priv-flags: no

then try to install wfb-ng on jetson board:

git clone [email protected]:svpcom/wfb-ng.git
cd wfb-ng
sudo ./scripts/install_gs.sh wlan1

and I got error:

Collecting git+https://github.com/svpcom/stdeb
  Cloning https://github.com/svpcom/stdeb to /tmp/pip-req-build-ycqy88pl
  Running command git clone -q https://github.com/svpcom/stdeb /tmp/pip-req-build-ycqy88pl
  error: RPC failed; curl 28 Failed to connect to github.com port 443: Connection timed out
  fatal: the remote end hung up unexpectedly
ERROR: Command errored out with exit status 128: git clone -q https://github.com/svpcom/stdeb /tmp/pip-req-build-ycqy88pl Check the logs for full command output.
make: *** [Makefile:27: /home/daniel/wfb/wfb-ng/env] Error 1

I thought it might be some network issue, so re-run the command: sudo ./scripts/install_gs.sh wlan1

...
rm -rf deb_dist
$(PATH=/home/daniel/wfb/wfb-ng/env/bin:/home/daniel/wfb/wfb-ng/env/local/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/snap/bin which python3) ./setup.py --command-packages=stdeb.command bdist_deb
usage: setup.py [global_opts] cmd1 [cmd1_opts] [cmd2 [cmd2_opts] ...]
   or: setup.py --help [cmd1 cmd2 ...]
   or: setup.py --help-commands
   or: setup.py cmd --help

error: invalid command 'bdist_deb'
make: *** [Makefile:65: deb] Error 1

Then always the above output, I'm NOT sure what to do next.

I did simple test, see #375. And it works for me.

[svpcom]

Remove /home/daniel/wfb/wfb-ng/env and run script again