drone fpv-camera loaded failed

[cxy0303]

I am using a Raspberry Pi 2 Model B equipped with an IMX219 (unofficial), the system is wfb-ng 23.0.1,andd it reports the following error：

░░ The job identifier is 119.
Sep 11 15:53:25 raspberrypi sh[343]: Setting pipeline to PAUSED ...
Sep 11 15:53:25 raspberrypi sh[343]: Pipeline is live and does not need PREROLL ...
Sep 11 15:53:25 raspberrypi sh[343]: Pipeline is PREROLLED ...
Sep 11 15:53:25 raspberrypi sh[343]: Setting pipeline to PLAYING ...
Sep 11 15:53:25 raspberrypi sh[343]: New clock: GstSystemClock
Sep 11 15:53:25 raspberrypi sh[343]: ERROR: from element /GstPipeline:pipeline0/GstV4l2Src:v4l2src0: Internal data str>
Sep 11 15:53:25 raspberrypi sh[343]: Additional debug info:
Sep 11 15:53:25 raspberrypi sh[343]: ../libs/gst/base/gstbasesrc.c(3127): gst_base_src_loop (): /GstPipeline:pipeline0>
Sep 11 15:53:25 raspberrypi sh[343]: streaming stopped, reason not-negotiated (-4)
Sep 11 15:53:25 raspberrypi sh[343]: Execution ended after 0:00:00.003169010
Sep 11 15:53:25 raspberrypi sh[343]: Setting pipeline to NULL ...
Sep 11 15:53:25 raspberrypi sh[343]: Freeing pipeline ...
Sep 11 15:53:25 raspberrypi systemd[1]: fpv-camera.service: Main process exited, code=exited, status=1/FAILURE
░░ Subject: Unit process exited

[svpcom]

What v4l2-ctl --all show?

[svpcom]

i had try # gst-launch-1.0 v4l2src ! video/x-raw,format=YUY2,width=640,height=480,framerate=16/1 ! queue max-size-buffers=0 max-size-time=15000000000 ! videoconvert ! autovideosink. It still repeats the above error

Try gst-launch-1.0 -vv v4l2src ! fakesink . Will it start pipeline or also broke?

[cxy0303]

It's still the same mistake.

[svpcom]

Try to set

gpu_mem = 128
start_x = 1

in /boot/config.txt and reboot

[cxy0303]

Is it because my Carema doesn't support 'YUY2'?

[cxy0303]

Try to set

gpu_mem = 128
start_x = 1

in /boot/config.txt and reboot

i had try it too

[cxy0303]

update to 25.01