-
|
The Atheros AR9350 is listed as supported hardware, but there are notes about CPU, flash, and RAM limitations. Does this mean I can't use an adapter with this chip in a plug-and-play manner by simply plugging it into a USB port, like I would with RTL8812AU adapters? |
Beta Was this translation helpful? Give feedback.
Replies: 1 comment
-
|
If your AR9350-based router supported by openwrt, then you can use it easily with https://github.com/svpcom/wfb-ng/wiki/Distributed-operation. Just flash openwrt + wfb-ng package (depends from flash size you can install it via apk or generate custom openwrt firmware (using package builder) contains only wfb-ng and remove hostapd, luci, etc) |
Beta Was this translation helpful? Give feedback.
If your AR9350-based router supported by openwrt, then you can use it easily with https://github.com/svpcom/wfb-ng/wiki/Distributed-operation. Just flash openwrt + wfb-ng package (depends from flash size you can install it via apk or generate custom openwrt firmware (using package builder) contains only wfb-ng and remove hostapd, luci, etc)