Specify can_branch and decode the sret instruction

sret instruction is used for returning from a trap when trap occurs in
S-mode level. Thus, the execution flow will not be sequential. During
basic block translation, the sret instruction should be considered as
can_branch instruction.

Moreover, the existing system instruction decoder does not support
decoding the sret instruction. Thus, the ir->opcode should be set
correctly to support decoding the sret instruction.

Author: ChinYikMing

src/decode.c

@@ -827,6 +827,8 @@ static inline bool op_system(rv_insn_t *ir, const uint32_t insn)
         case 0x105: /* WFI: Wait for Interrupt */
         case 0x002: /* URET: return from traps in U-mode */
         case 0x102: /* SRET: return from traps in S-mode */
+            ir->opcode = rv_insn_sret;
+            break;
         case 0x202: /* HRET: return from traps in H-mode */
             /* illegal instruciton */
             return false;

src/decode.h

@@ -77,7 +77,7 @@ enum op_field {
     /* RISC-V Privileged Instruction */                \
     _(wfi, 0, 4, 0, ENC(rs1, rd))                      \
     _(uret, 0, 4, 0, ENC(rs1, rd))                     \
-    _(sret, 0, 4, 0, ENC(rs1, rd))                     \
+    _(sret, 1, 4, 0, ENC(rs1, rd))                     \
     _(hret, 0, 4, 0, ENC(rs1, rd))                     \
     _(mret, 1, 4, 0, ENC(rs1, rd))                     \
     /* RV32 Zifencei Standard Extension */             \