Updated README

Author: MHeironimus

README.md

@@ -2,7 +2,7 @@
 
 #### Version 2.1.0
 
-This library can be used with Arduino IDE 1.6.6 (or above) to add one or more joysticks (or gamepads) to the list of HID devices an [Arduino Leonardo](https://www.arduino.cc/en/Main/ArduinoBoardLeonardo) or [Arduino Micro](https://www.arduino.cc/en/Main/ArduinoBoardMicro) (or any Arduino clone that is based on the ATmega32u4) can support. This library will also work with the [Arduino Due](https://www.arduino.cc/en/Main/ArduinoBoardDue), thanks to [@Palakis](https://github.com/Palakis). A complete list of supported boards can be found in the [Wiki](https://github.com/MHeironimus/ArduinoJoystickLibrary/wiki/Supported-Boards). This will not work with Arduino IDE 1.6.5 (or below) or with non-32u4 based Arduino devices (e.g. Arduino UNO, Arduino MEGA, etc.).
+This library can be used with Arduino IDE 1.6.6 or above (see [Wiki - Testing Details](https://github.com/MHeironimus/ArduinoJoystickLibrary/wiki/Testing-Details) for more information) to add one or more joysticks (or gamepads) to the list of HID devices an [Arduino Leonardo](https://www.arduino.cc/en/Main/ArduinoBoardLeonardo) or [Arduino Micro](https://www.arduino.cc/en/Main/ArduinoBoardMicro) (or any Arduino clone that is based on the ATmega32u4) can support. This library will also work with the [Arduino Due](https://www.arduino.cc/en/Main/ArduinoBoardDue), thanks to [@Palakis](https://github.com/Palakis). A complete list of supported boards can be found in the [Wiki - Supported Boards](https://github.com/MHeironimus/ArduinoJoystickLibrary/wiki/Supported-Boards). This will not work with Arduino IDE 1.6.5 (or below) or with non-32u4 based Arduino devices (e.g. Arduino UNO, Arduino MEGA, etc.).
 
 ## Features
 
@@ -26,18 +26,6 @@ The following instructions can be used to install the latest version of the libr
 
 ## Examples
 
-The following example Arduino sketch files are included in this library:
-
-- `JoystickTest` - Simple test of the Joystick library. It exercises many of the Joystick library’s functions when pin A0 is grounded.
-- `MultipleJoystickTest` - Creates 4 Joysticks using the library and exercises the first 16 buttons, the X axis, and the Y axis of each joystick when pin A0 is grounded.
-- `JoystickButton` - Creates a Joystick and maps pin 9 to button 0 of the joystick, pin 10 to button 1, pin 11 to button 2, and pin 12 to button 3.
-- `JoystickKeyboard` - Creates a Joystick and a Keyboard. Maps pin 9 to Joystick Button 0, pin 10 to Joystick Button 1, pin 11 to Keyboard key 1, and pin 12 to Keyboard key 2.
-- `GamepadExample` - Creates a simple Gamepad with an Up, Down, Left, Right, and Fire button.
-- `DrivingControllerTest` - Creates a Driving Controller and tests 4 buttons, the Steering, Brake, and Accelerator when pin A0 is grounded.
-- `FlightControllerTest` - Creates a Flight Controller and tests 32 buttons, the X and Y axis, the Throttle, and the Rudder when pin A0 is grounded.
-- `HatSwitchTest` - Creates a joystick with two hat switches. Grounding pins 4 - 11 cause the hat switches to change position.
-- `ArcadeStickExample` - Simple arcade stick example that demonstrates how to read twelve Arduino Pro Micro digital pins and map them to the library (thanks to [@nebhead](https://github.com/nebhead) for this example). NOTE: This sketch is for the Arduino Pro Micro only.
-
 ### Simple example
 
 ```C++
@@ -74,6 +62,25 @@ void loop() {
 }
 ```
 
+### Included Examples
+
+The following example Arduino sketch files are included in this library:
+
+#### Simple Samples
+
+- `JoystickButton` - Creates a Joystick and maps pin 9 to button 0 of the joystick, pin 10 to button 1, pin 11 to button 2, and pin 12 to button 3.
+- `JoystickKeyboard` - Creates a Joystick and a Keyboard. Maps pin 9 to Joystick Button 0, pin 10 to Joystick Button 1, pin 11 to Keyboard key 1, and pin 12 to Keyboard key 2.
+- `GamepadExample` - Creates a simple Gamepad with an Up, Down, Left, Right, and Fire button.
+- `ArcadeStickExample` - Simple arcade stick example that demonstrates how to read twelve Arduino Pro Micro digital pins and map them to the library (thanks to [@nebhead](https://github.com/nebhead) for this example). NOTE: This sketch is for the Arduino Pro Micro only.
+
+#### Used for Testing
+
+- `JoystickTest` - Simple test of the Joystick library. It exercises many of the Joystick library’s functions when pin A0 is grounded.
+- `MultipleJoystickTest` - Creates 4 Joysticks using the library (each with a slightly different configuration) and exercises the first 16 buttons (if present), the X axis, and the Y axis of each joystick when pin A0 is grounded.
+- `FlightControllerTest` - Creates a Flight Controller and tests 32 buttons, the X and Y axis, the Throttle, and the Rudder when pin A0 is grounded.
+- `HatSwitchTest` - Creates a joystick with two hat switches. Grounding pins 4 - 11 cause the hat switches to change position.
+- `DrivingControllerTest` - Creates a Driving Controller and tests 4 buttons, the Steering, Brake, and Accelerator when pin A0 is grounded.
+
 ## Joystick Library API
 
 The following API is available if the Joystick library in included in a sketch file.