BAM_Creep.txt

BAM 5.2 Vh5205_C-95.LIS						
------------------------------------						
ENTRY	SYMBOL	UNIT		* Information common to all tests		
Date of test start			30.8.23 9:06 AM			
Test ID			Vh5205_C-95			
Test standard			DIN EN ISO 204:2019-4	*		
Specified temperature	T	?	980 °C	*		
Type of loading			Tension	*		
Initial stress	Ro	MPa	140			
(Digital) Material Identifier			CMSX-6	*		
"Description of the manufacturing process - as-tested material
"			Single Crystal Investment Casting from a Vacuum Induction Refined Ingot and subsequent Heat Treatment (annealed and aged).	*		
Single crystal orientation		°	7,5			
Type of test piece II			Round cross section	*		
Type of test piece III			Smooth test piece	*		
Sensor type - Contacting extensometer			Clip-on extensometer	*		
Min. test piece diameter at room temperature	D	mm	5,99			
Reference length for calculation of percentage elongations	Lr = Lo	mm	23,9			
Reference length for calculation of percentage extensions	Lr = Le	mm	22,9			
Heating time		h	1,61			
Soak time before the test		h	2,81			
Test duration	t	h	1010			
Creep rupture time	tu	h	Not applicable			
Percentage permanent elongation	Aper	%	1,14			
Percentage elongation after creep fracture	Au	%	Not applicable			
Percentage reduction of area after creep fracture	Zu	%	Not applicable			
Percentage total extension	et	%	0,964			
Percentage initial total extension	eti	%	0,153			
Percentage elastic extension	ee	%	0,153			
Percentage initial plastic extension	ei	%	0			
Percentage plastic extension	ep	%	0,811			
Percentage creep extension	ef	%	0,811