Device request: Dekco DC4L2CA11 (T31L + GC4653 + SSV6256P)

[assphalt]

Device Information

• Brand/Model: Dekco DC4L2CA11
• SoC: Ingenic T31L
• Sensor: GalaxyCore GC4653 (4MP)
• WiFi: SSV6256P
• Flash: Unknown (likely 8MB or 16MB)
  Current Status
  Tried SD card flashing with:
• thingino-wansview_g6_t31l_sc2336_ssv6256p.bin - failed
• thingino-laview_l2_t31l_sc3338_ssv6256p.bin - failed

Camera boots back to stock CloudEdge firmware.

Notes

• Board label shows "0301001B4" and version "4.0"
• Sensor marked as U211 on PCB
• Would like RTSP support for Home Assistant/Frigate integration

Please let me know if you need more info.

Thank you

[gtxaspec]

can you post uart bootlogs?

[assphalt]

I don't have a USB-to-serial adapter at the moment. I can order one if needed.

Is there any other information I can provide in the meantime?

[themactep]

flash chip is 16mb
get a programmer with a clip and dump the stock firmware
then flash thingino with the same clip

[assphalt]

I will buy a kit and try it, thank you