From b7f2c8e8dab3f815da188d27de24313252eaea29 Mon Sep 17 00:00:00 2001 From: Ben Hocker Date: Wed, 12 Jul 2017 16:09:18 -0500 Subject: [PATCH 1/6] Changing default value of env macros --- templates/nagios-4.cfg.erb | 78 +- templates/nagios-4.cfg.orig | 1338 ----------------------------------- templates/nagios.cfg.orig | 1322 ---------------------------------- 3 files changed, 39 insertions(+), 2699 deletions(-) delete mode 100644 templates/nagios-4.cfg.orig delete mode 100644 templates/nagios.cfg.orig diff --git a/templates/nagios-4.cfg.erb b/templates/nagios-4.cfg.erb index 360e6daa..f209c597 100644 --- a/templates/nagios-4.cfg.erb +++ b/templates/nagios-4.cfg.erb @@ -12,7 +12,7 @@ # LOG FILE # This is the main log file where service and host events are logged -# for historical purposes. This should be the first option specified +# for historical purposes. This should be the first option specified # in the config file!!! log_file=/var/log/nagios/nagios.log @@ -66,7 +66,7 @@ cfg_dir=/etc/nagios/conf.d # OBJECT CACHE FILE # This option determines where object definitions are cached when -# Nagios starts/restarts. The CGIs read object definitions from +# Nagios starts/restarts. The CGIs read object definitions from # this cache file (rather than looking at the object config files # directly) in order to prevent inconsistencies that can occur # when the config files are modified after Nagios starts. @@ -82,7 +82,7 @@ object_cache_file=/var/log/nagios/objects.cache # file. You can then start Nagios with the -u option to have it read # object definitions from this precached file, rather than the standard # object configuration files (see the cfg_file and cfg_dir options above). -# Using a precached object file can speed up the time needed to (re)start +# Using a precached object file can speed up the time needed to (re)start # the Nagios process if you've got a large and/or complex configuration. # Read the documentation section on optimizing Nagios to find our more # about how this feature works. @@ -116,7 +116,7 @@ status_file=/var/log/nagios/status.dat # STATUS FILE UPDATE INTERVAL # This option determines the frequency (in seconds) that -# Nagios will periodically dump program, host, and +# Nagios will periodically dump program, host, and # service status data. status_update_interval=10 @@ -124,7 +124,7 @@ status_update_interval=10 # NAGIOS USER -# This determines the effective user that Nagios should run as. +# This determines the effective user that Nagios should run as. # You can either supply a username or a UID. nagios_user=nagios @@ -132,7 +132,7 @@ nagios_user=nagios # NAGIOS GROUP -# This determines the effective group that Nagios should run as. +# This determines the effective group that Nagios should run as. # You can either supply a group name or a GID. nagios_group=nagios @@ -155,7 +155,7 @@ check_external_commands=1 # This is the file that Nagios checks for external command requests. # It is also where the command CGI will write commands that are submitted # by users, so it must be writeable by the user that the web server -# is running as (usually 'nobody'). Permissions should be set at the +# is running as (usually 'nobody'). Permissions should be set at the # directory level instead of on the file, as the file is deleted every # time its contents are processed. @@ -247,7 +247,7 @@ log_rotation_method=d # LOG ARCHIVE PATH -# This is the directory where archived (rotated) log files should be +# This is the directory where archived (rotated) log files should be # placed (assuming you've chosen to do log rotation). log_archive_path=/var/log/nagios/archives @@ -419,7 +419,7 @@ max_host_check_spread=30 # MAXIMUM CONCURRENT SERVICE CHECKS -# This option allows you to specify the maximum number of +# This option allows you to specify the maximum number of # service checks that can be run in parallel at any given time. # Specifying a value of 1 for this variable essentially prevents # any service checks from being parallelized. A value of 0 @@ -441,7 +441,7 @@ check_result_reaper_frequency=10 # MAX CHECK RESULT REAPER TIME # This is the max amount of time (in seconds) that a single -# check result reaper event will be allowed to run before +# check result reaper event will be allowed to run before # returning control back to Nagios so it can perform other # duties. @@ -455,7 +455,7 @@ max_check_result_reaper_time=30 # service checks that have not yet been processed. # # Note: Make sure that only one instance of Nagios has access -# to this directory! +# to this directory! check_result_path=/var/log/nagios/spool/checkresults @@ -464,7 +464,7 @@ check_result_path=/var/log/nagios/spool/checkresults # MAX CHECK RESULT FILE AGE # This option determines the maximum age (in seconds) which check -# result files are considered to be valid. Files older than this +# result files are considered to be valid. Files older than this # threshold will be mercilessly deleted without further processing. max_check_result_file_age=3600 @@ -526,14 +526,14 @@ enable_predictive_service_dependency_checks=1 # SOFT STATE DEPENDENCIES -# This option determines whether or not Nagios will use soft state -# information when checking host and service dependencies. Normally -# Nagios will only use the latest hard host or service state when +# This option determines whether or not Nagios will use soft state +# information when checking host and service dependencies. Normally +# Nagios will only use the latest hard host or service state when # checking dependencies. If you want it to use the latest state (regardless -# of whether its a soft or hard state type), enable this option. +# of whether its a soft or hard state type), enable this option. # Values: -# 0 = Don't use soft state dependencies (default) -# 1 = Use soft state dependencies +# 0 = Don't use soft state dependencies (default) +# 1 = Use soft state dependencies soft_state_dependencies=0 @@ -551,7 +551,7 @@ soft_state_dependencies=0 # This option determines whether or not Nagios will attempt to # automatically reschedule active host and service checks to # "smooth" them out over time. This can help balance the load on -# the monitoring server. +# the monitoring server. # WARNING: THIS IS AN EXPERIMENTAL FEATURE - IT CAN DEGRADE # PERFORMANCE, RATHER THAN INCREASE IT, IF USED IMPROPERLY @@ -606,7 +606,7 @@ perfdata_timeout=5 # This setting determines whether or not Nagios will save state # information for services and hosts before it shuts down. Upon # startup Nagios will reload all saved service and host state -# information before starting to monitor. This is useful for +# information before starting to monitor. This is useful for # maintaining long-term data on state statistics, etc, but will # slow Nagios down a bit when it (re)starts. Since its only # a one-time penalty, I think its well worth the additional @@ -618,7 +618,7 @@ retain_state_information=1 # STATE RETENTION FILE # This is the file that Nagios should use to store host and -# service state information before it shuts down. The state +# service state information before it shuts down. The state # information in this file is also read immediately prior to # starting to monitor the network when Nagios is restarted. # This file is used only if the retain_state_information @@ -641,7 +641,7 @@ retention_update_interval=60 # USE RETAINED PROGRAM STATE -# This setting determines whether or not Nagios will set +# This setting determines whether or not Nagios will set # program status variables based on the values saved in the # retention file. If you want to use retained program status # information, set this value to 1. If not, set this value @@ -668,7 +668,7 @@ use_retained_scheduling_info=1 # program restarts. # # The values of the masks are bitwise ANDs of values specified -# by the "MODATTR_" definitions found in include/common.h. +# by the "MODATTR_" definitions found in include/common.h. # For example, if you do not want the current enabled/disabled state # of flap detection and event handlers for hosts to be retained, you # would use a value of 24 for the host attribute mask... @@ -712,7 +712,7 @@ interval_length=60 # enable this option to ensure that you stay on top of the latest critical # patches to Nagios. Nagios is critical to you - make sure you keep it in # good shape. Nagios will check once a day for new updates. Data collected -# by Nagios Enterprises from the update check is processed in accordance +# by Nagios Enterprises from the update check is processed in accordance # with our privacy policy - see http://api.nagios.org for details. check_for_updates=1 @@ -721,10 +721,10 @@ check_for_updates=1 # BARE UPDATE CHECK # This option deterines what data Nagios will send to api.nagios.org when -# it checks for updates. By default, Nagios will send information on the +# it checks for updates. By default, Nagios will send information on the # current version of Nagios you have installed, as well as an indicator as # to whether this was a new installation or not. Nagios Enterprises uses -# this data to determine the number of users running specific version of +# this data to determine the number of users running specific version of # Nagios. Enable this option if you do not want this information to be sent. bare_update_check=0 @@ -744,7 +744,7 @@ use_aggressive_host_checking=0 # SERVICE CHECK EXECUTION OPTION # This determines whether or not Nagios will actively execute -# service checks when it initially starts. If this option is +# service checks when it initially starts. If this option is # disabled, checks are not actively made, but Nagios can still # receive and process passive check results that come in. Unless # you're implementing redundant hosts or have a special need for @@ -766,7 +766,7 @@ accept_passive_service_checks=1 # HOST CHECK EXECUTION OPTION # This determines whether or not Nagios will actively execute -# host checks when it initially starts. If this option is +# host checks when it initially starts. If this option is # disabled, checks are not actively made, but Nagios can still # receive and process passive check results that come in. Unless # you're implementing redundant hosts or have a special need for @@ -823,7 +823,7 @@ process_performance_data=<%= @process_performance_data %> # These commands are run after every host and service check is # performed. These commands are executed only if the # enable_performance_data option (above) is set to 1. The command -# argument is the short name of a command definition that you +# argument is the short name of a command definition that you # define in your host configuration file. Read the HTML docs for # more information on performance data. @@ -934,7 +934,7 @@ obsess_over_services=0 # OBSESSIVE COMPULSIVE SERVICE PROCESSOR COMMAND # This is the command that is run for every service check that is # processed by Nagios. This command is executed only if the -# obsess_over_services option (above) is set to 1. The command +# obsess_over_services option (above) is set to 1. The command # argument is the short name of a command definition that you # define in your host configuration file. Read the HTML docs for # more information on implementing distributed monitoring. @@ -958,7 +958,7 @@ obsess_over_hosts=0 # OBSESSIVE COMPULSIVE HOST PROCESSOR COMMAND # This is the command that is run for every host check that is # processed by Nagios. This command is executed only if the -# obsess_over_hosts option (above) is set to 1. The command +# obsess_over_hosts option (above) is set to 1. The command # argument is the short name of a command definition that you # define in your host configuration file. Read the HTML docs for # more information on implementing distributed monitoring. @@ -997,9 +997,9 @@ passive_host_checks_are_soft=0 # ORPHANED HOST/SERVICE CHECK OPTIONS -# These options determine whether or not Nagios will periodically +# These options determine whether or not Nagios will periodically # check for orphaned host service checks. Since service checks are -# not rescheduled until the results of their previous execution +# not rescheduled until the results of their previous execution # instance are processed, there exists a possibility that some # checks may never get rescheduled. A similar situation exists for # host checks, although the exact scheduling details differ a bit @@ -1083,9 +1083,9 @@ additional_freshness_latency=15 # FLAP DETECTION OPTION # This option determines whether or not Nagios will try -# and detect hosts and services that are "flapping". +# and detect hosts and services that are "flapping". # Flapping occurs when a host or service changes between -# states too frequently. When Nagios detects that a +# states too frequently. When Nagios detects that a # host or service is flapping, it will temporarily suppress # notifications for that host/service until it stops # flapping. Flap detection is very experimental, so read @@ -1129,7 +1129,7 @@ date_format=<%= @date_format %> # the system configured timezone. # # NOTE: In order to display the correct timezone in the CGIs, you -# will also need to alter the Apache directives for the CGI path +# will also need to alter the Apache directives for the CGI path # to include your timezone. Example: # # @@ -1182,7 +1182,7 @@ use_regexp_matching=0 # "TRUE" REGULAR EXPRESSION MATCHING -# This option controls whether or not "true" regular expression +# This option controls whether or not "true" regular expression # matching takes place in the object config files. This option # only has an effect if regular expression matching is enabled # (see above). If this option is DISABLED, regular expression @@ -1244,7 +1244,7 @@ use_large_installation_tweaks=0 # Values: 1 - Enable environment variable macros # 0 - Disable environment variable macros (default) -enable_environment_macros=0 +enable_environment_macros=1 @@ -1279,7 +1279,7 @@ enable_environment_macros=0 # This option determines how much (if any) debugging information will # be written to the debug file. OR values together to log multiple # types of information. -# Values: +# Values: # -1 = Everything # 0 = Nothing # 1 = Functions diff --git a/templates/nagios-4.cfg.orig b/templates/nagios-4.cfg.orig deleted file mode 100644 index 88944189..00000000 --- a/templates/nagios-4.cfg.orig +++ /dev/null @@ -1,1338 +0,0 @@ -############################################################################## -# -# NAGIOS.CFG - Sample Main Config File for Nagios 4.0.8 -# -# Read the documentation for more information on this configuration -# file. I've provided some comments here, but things may not be so -# clear without further explanation. -# -# -############################################################################## - - -# LOG FILE -# This is the main log file where service and host events are logged -# for historical purposes. This should be the first option specified -# in the config file!!! - -log_file=/var/log/nagios/nagios.log - - - -# OBJECT CONFIGURATION FILE(S) -# These are the object configuration files in which you define hosts, -# host groups, contacts, contact groups, services, etc. -# You can split your object definitions across several config files -# if you wish (as shown below), or keep them all in a single config file. - -# You can specify individual object config files as shown below: -cfg_file=/etc/nagios/objects/commands.cfg -cfg_file=/etc/nagios/objects/contacts.cfg -cfg_file=/etc/nagios/objects/timeperiods.cfg -cfg_file=/etc/nagios/objects/templates.cfg - -# Definitions for monitoring the local (Linux) host -cfg_file=/etc/nagios/objects/localhost.cfg - -# Definitions for monitoring a Windows machine -#cfg_file=/etc/nagios/objects/windows.cfg - -# Definitions for monitoring a router/switch -#cfg_file=/etc/nagios/objects/switch.cfg - -# Definitions for monitoring a network printer -#cfg_file=/etc/nagios/objects/printer.cfg - - -# You can also tell Nagios to process all config files (with a .cfg -# extension) in a particular directory by using the cfg_dir -# directive as shown below: - -#cfg_dir=/etc/nagios/servers -#cfg_dir=/etc/nagios/printers -#cfg_dir=/etc/nagios/switches -#cfg_dir=/etc/nagios/routers - -cfg_dir=/etc/nagios/conf.d - - - - -# OBJECT CACHE FILE -# This option determines where object definitions are cached when -# Nagios starts/restarts. The CGIs read object definitions from -# this cache file (rather than looking at the object config files -# directly) in order to prevent inconsistencies that can occur -# when the config files are modified after Nagios starts. - -object_cache_file=/var/log/nagios/objects.cache - - - -# PRE-CACHED OBJECT FILE -# This options determines the location of the precached object file. -# If you run Nagios with the -p command line option, it will preprocess -# your object configuration file(s) and write the cached config to this -# file. You can then start Nagios with the -u option to have it read -# object definitions from this precached file, rather than the standard -# object configuration files (see the cfg_file and cfg_dir options above). -# Using a precached object file can speed up the time needed to (re)start -# the Nagios process if you've got a large and/or complex configuration. -# Read the documentation section on optimizing Nagios to find our more -# about how this feature works. - -precached_object_file=/var/log/nagios/objects.precache - - - -# RESOURCE FILE -# This is an optional resource file that contains $USERx$ macro -# definitions. Multiple resource files can be specified by using -# multiple resource_file definitions. The CGIs will not attempt to -# read the contents of resource files, so information that is -# considered to be sensitive (usernames, passwords, etc) can be -# defined as macros in this file and restrictive permissions (600) -# can be placed on this file. - -resource_file=/etc/nagios/private/resource.cfg - - - -# STATUS FILE -# This is where the current status of all monitored services and -# hosts is stored. Its contents are read and processed by the CGIs. -# The contents of the status file are deleted every time Nagios -# restarts. - -status_file=/var/log/nagios/status.dat - - - -# STATUS FILE UPDATE INTERVAL -# This option determines the frequency (in seconds) that -# Nagios will periodically dump program, host, and -# service status data. - -status_update_interval=10 - - - -# NAGIOS USER -# This determines the effective user that Nagios should run as. -# You can either supply a username or a UID. - -nagios_user=nagios - - - -# NAGIOS GROUP -# This determines the effective group that Nagios should run as. -# You can either supply a group name or a GID. - -nagios_group=nagios - - - -# EXTERNAL COMMAND OPTION -# This option allows you to specify whether or not Nagios should check -# for external commands (in the command file defined below). By default -# Nagios will *not* check for external commands, just to be on the -# cautious side. If you want to be able to use the CGI command interface -# you will have to enable this. -# Values: 0 = disable commands, 1 = enable commands - -check_external_commands=1 - - - -# EXTERNAL COMMAND FILE -# This is the file that Nagios checks for external command requests. -# It is also where the command CGI will write commands that are submitted -# by users, so it must be writeable by the user that the web server -# is running as (usually 'nobody'). Permissions should be set at the -# directory level instead of on the file, as the file is deleted every -# time its contents are processed. - -command_file=/var/spool/nagios/cmd/nagios.cmd - - - -# QUERY HANDLER INTERFACE -# This is the socket that is created for the Query Handler interface - -query_socket=/var/spool/nagios/cmd/nagios.qh - - - -# LOCK FILE -# This is the lockfile that Nagios will use to store its PID number -# in when it is running in daemon mode. - -lock_file=/var/run/nagios/nagios.pid - - - -# TEMP FILE -# This is a temporary file that is used as scratch space when Nagios -# updates the status log, cleans the comment file, etc. This file -# is created, used, and deleted throughout the time that Nagios is -# running. - -temp_file=/var/log/nagios/nagios.tmp - - - -# TEMP PATH -# This is path where Nagios can create temp files for service and -# host check results, etc. - -temp_path=/tmp - - - -# EVENT BROKER OPTIONS -# Controls what (if any) data gets sent to the event broker. -# Values: 0 = Broker nothing -# -1 = Broker everything -# = See documentation - -event_broker_options=-1 - - - -# EVENT BROKER MODULE(S) -# This directive is used to specify an event broker module that should -# by loaded by Nagios at startup. Use multiple directives if you want -# to load more than one module. Arguments that should be passed to -# the module at startup are seperated from the module path by a space. -# -#!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! -# WARNING !!! WARNING !!! WARNING !!! WARNING !!! WARNING !!! WARNING -#!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! -# -# Do NOT overwrite modules while they are being used by Nagios or Nagios -# will crash in a fiery display of SEGFAULT glory. This is a bug/limitation -# either in dlopen(), the kernel, and/or the filesystem. And maybe Nagios... -# -# The correct/safe way of updating a module is by using one of these methods: -# 1. Shutdown Nagios, replace the module file, restart Nagios -# 2. Delete the original module file, move the new module file into place, restart Nagios -# -# Example: -# -# broker_module= [moduleargs] - -#broker_module=/somewhere/module1.o -#broker_module=/somewhere/module2.o arg1 arg2=3 debug=0 - - - -# LOG ROTATION METHOD -# This is the log rotation method that Nagios should use to rotate -# the main log file. Values are as follows.. -# n = None - don't rotate the log -# h = Hourly rotation (top of the hour) -# d = Daily rotation (midnight every day) -# w = Weekly rotation (midnight on Saturday evening) -# m = Monthly rotation (midnight last day of month) - -log_rotation_method=d - - - -# LOG ARCHIVE PATH -# This is the directory where archived (rotated) log files should be -# placed (assuming you've chosen to do log rotation). - -log_archive_path=/var/log/nagios/archives - - - -# LOGGING OPTIONS -# If you want messages logged to the syslog facility, as well as the -# Nagios log file set this option to 1. If not, set it to 0. - -use_syslog=1 - - - -# NOTIFICATION LOGGING OPTION -# If you don't want notifications to be logged, set this value to 0. -# If notifications should be logged, set the value to 1. - -log_notifications=1 - - - -# SERVICE RETRY LOGGING OPTION -# If you don't want service check retries to be logged, set this value -# to 0. If retries should be logged, set the value to 1. - -log_service_retries=1 - - - -# HOST RETRY LOGGING OPTION -# If you don't want host check retries to be logged, set this value to -# 0. If retries should be logged, set the value to 1. - -log_host_retries=1 - - - -# EVENT HANDLER LOGGING OPTION -# If you don't want host and service event handlers to be logged, set -# this value to 0. If event handlers should be logged, set the value -# to 1. - -log_event_handlers=1 - - - -# INITIAL STATES LOGGING OPTION -# If you want Nagios to log all initial host and service states to -# the main log file (the first time the service or host is checked) -# you can enable this option by setting this value to 1. If you -# are not using an external application that does long term state -# statistics reporting, you do not need to enable this option. In -# this case, set the value to 0. - -log_initial_states=0 - - - -# CURRENT STATES LOGGING OPTION -# If you don't want Nagios to log all current host and service states -# after log has been rotated to the main log file, you can disable this -# option by setting this value to 0. Default value is 1. - -log_current_states=1 - - - -# EXTERNAL COMMANDS LOGGING OPTION -# If you don't want Nagios to log external commands, set this value -# to 0. If external commands should be logged, set this value to 1. -# Note: This option does not include logging of passive service -# checks - see the option below for controlling whether or not -# passive checks are logged. - -log_external_commands=1 - - - -# PASSIVE CHECKS LOGGING OPTION -# If you don't want Nagios to log passive host and service checks, set -# this value to 0. If passive checks should be logged, set -# this value to 1. - -log_passive_checks=1 - - - -# GLOBAL HOST AND SERVICE EVENT HANDLERS -# These options allow you to specify a host and service event handler -# command that is to be run for every host or service state change. -# The global event handler is executed immediately prior to the event -# handler that you have optionally specified in each host or -# service definition. The command argument is the short name of a -# command definition that you define in your host configuration file. -# Read the HTML docs for more information. - -#global_host_event_handler=somecommand -#global_service_event_handler=somecommand - - - -# SERVICE INTER-CHECK DELAY METHOD -# This is the method that Nagios should use when initially -# "spreading out" service checks when it starts monitoring. The -# default is to use smart delay calculation, which will try to -# space all service checks out evenly to minimize CPU load. -# Using the dumb setting will cause all checks to be scheduled -# at the same time (with no delay between them)! This is not a -# good thing for production, but is useful when testing the -# parallelization functionality. -# n = None - don't use any delay between checks -# d = Use a "dumb" delay of 1 second between checks -# s = Use "smart" inter-check delay calculation -# x.xx = Use an inter-check delay of x.xx seconds - -service_inter_check_delay_method=s - - - -# MAXIMUM SERVICE CHECK SPREAD -# This variable determines the timeframe (in minutes) from the -# program start time that an initial check of all services should -# be completed. Default is 30 minutes. - -max_service_check_spread=30 - - - -# SERVICE CHECK INTERLEAVE FACTOR -# This variable determines how service checks are interleaved. -# Interleaving the service checks allows for a more even -# distribution of service checks and reduced load on remote -# hosts. Setting this value to 1 is equivalent to how versions -# of Nagios previous to 0.0.5 did service checks. Set this -# value to s (smart) for automatic calculation of the interleave -# factor unless you have a specific reason to change it. -# s = Use "smart" interleave factor calculation -# x = Use an interleave factor of x, where x is a -# number greater than or equal to 1. - -service_interleave_factor=s - - - -# HOST INTER-CHECK DELAY METHOD -# This is the method that Nagios should use when initially -# "spreading out" host checks when it starts monitoring. The -# default is to use smart delay calculation, which will try to -# space all host checks out evenly to minimize CPU load. -# Using the dumb setting will cause all checks to be scheduled -# at the same time (with no delay between them)! -# n = None - don't use any delay between checks -# d = Use a "dumb" delay of 1 second between checks -# s = Use "smart" inter-check delay calculation -# x.xx = Use an inter-check delay of x.xx seconds - -host_inter_check_delay_method=s - - - -# MAXIMUM HOST CHECK SPREAD -# This variable determines the timeframe (in minutes) from the -# program start time that an initial check of all hosts should -# be completed. Default is 30 minutes. - -max_host_check_spread=30 - - - -# MAXIMUM CONCURRENT SERVICE CHECKS -# This option allows you to specify the maximum number of -# service checks that can be run in parallel at any given time. -# Specifying a value of 1 for this variable essentially prevents -# any service checks from being parallelized. A value of 0 -# will not restrict the number of concurrent checks that are -# being executed. - -max_concurrent_checks=0 - - - -# HOST AND SERVICE CHECK REAPER FREQUENCY -# This is the frequency (in seconds!) that Nagios will process -# the results of host and service checks. - -check_result_reaper_frequency=10 - - - - -# MAX CHECK RESULT REAPER TIME -# This is the max amount of time (in seconds) that a single -# check result reaper event will be allowed to run before -# returning control back to Nagios so it can perform other -# duties. - -max_check_result_reaper_time=30 - - - - -# CHECK RESULT PATH -# This is directory where Nagios stores the results of host and -# service checks that have not yet been processed. -# -# Note: Make sure that only one instance of Nagios has access -# to this directory! - -check_result_path=/var/log/nagios/spool/checkresults - - - - -# MAX CHECK RESULT FILE AGE -# This option determines the maximum age (in seconds) which check -# result files are considered to be valid. Files older than this -# threshold will be mercilessly deleted without further processing. - -max_check_result_file_age=3600 - - - - -# CACHED HOST CHECK HORIZON -# This option determines the maximum amount of time (in seconds) -# that the state of a previous host check is considered current. -# Cached host states (from host checks that were performed more -# recently that the timeframe specified by this value) can immensely -# improve performance in regards to the host check logic. -# Too high of a value for this option may result in inaccurate host -# states being used by Nagios, while a lower value may result in a -# performance hit for host checks. Use a value of 0 to disable host -# check caching. - -cached_host_check_horizon=15 - - - -# CACHED SERVICE CHECK HORIZON -# This option determines the maximum amount of time (in seconds) -# that the state of a previous service check is considered current. -# Cached service states (from service checks that were performed more -# recently that the timeframe specified by this value) can immensely -# improve performance in regards to predictive dependency checks. -# Use a value of 0 to disable service check caching. - -cached_service_check_horizon=15 - - - -# ENABLE PREDICTIVE HOST DEPENDENCY CHECKS -# This option determines whether or not Nagios will attempt to execute -# checks of hosts when it predicts that future dependency logic test -# may be needed. These predictive checks can help ensure that your -# host dependency logic works well. -# Values: -# 0 = Disable predictive checks -# 1 = Enable predictive checks (default) - -enable_predictive_host_dependency_checks=1 - - - -# ENABLE PREDICTIVE SERVICE DEPENDENCY CHECKS -# This option determines whether or not Nagios will attempt to execute -# checks of service when it predicts that future dependency logic test -# may be needed. These predictive checks can help ensure that your -# service dependency logic works well. -# Values: -# 0 = Disable predictive checks -# 1 = Enable predictive checks (default) - -enable_predictive_service_dependency_checks=1 - - - -# SOFT STATE DEPENDENCIES -# This option determines whether or not Nagios will use soft state -# information when checking host and service dependencies. Normally -# Nagios will only use the latest hard host or service state when -# checking dependencies. If you want it to use the latest state (regardless -# of whether its a soft or hard state type), enable this option. -# Values: -# 0 = Don't use soft state dependencies (default) -# 1 = Use soft state dependencies - -soft_state_dependencies=0 - - - -# TIME CHANGE ADJUSTMENT THRESHOLDS -# These options determine when Nagios will react to detected changes -# in system time (either forward or backwards). - -#time_change_threshold=900 - - - -# AUTO-RESCHEDULING OPTION -# This option determines whether or not Nagios will attempt to -# automatically reschedule active host and service checks to -# "smooth" them out over time. This can help balance the load on -# the monitoring server. -# WARNING: THIS IS AN EXPERIMENTAL FEATURE - IT CAN DEGRADE -# PERFORMANCE, RATHER THAN INCREASE IT, IF USED IMPROPERLY - -auto_reschedule_checks=0 - - - -# AUTO-RESCHEDULING INTERVAL -# This option determines how often (in seconds) Nagios will -# attempt to automatically reschedule checks. This option only -# has an effect if the auto_reschedule_checks option is enabled. -# Default is 30 seconds. -# WARNING: THIS IS AN EXPERIMENTAL FEATURE - IT CAN DEGRADE -# PERFORMANCE, RATHER THAN INCREASE IT, IF USED IMPROPERLY - -auto_rescheduling_interval=30 - - - -# AUTO-RESCHEDULING WINDOW -# This option determines the "window" of time (in seconds) that -# Nagios will look at when automatically rescheduling checks. -# Only host and service checks that occur in the next X seconds -# (determined by this variable) will be rescheduled. This option -# only has an effect if the auto_reschedule_checks option is -# enabled. Default is 180 seconds (3 minutes). -# WARNING: THIS IS AN EXPERIMENTAL FEATURE - IT CAN DEGRADE -# PERFORMANCE, RATHER THAN INCREASE IT, IF USED IMPROPERLY - -auto_rescheduling_window=180 - - - -# TIMEOUT VALUES -# These options control how much time Nagios will allow various -# types of commands to execute before killing them off. Options -# are available for controlling maximum time allotted for -# service checks, host checks, event handlers, notifications, the -# ocsp command, and performance data commands. All values are in -# seconds. - -service_check_timeout=60 -host_check_timeout=30 -event_handler_timeout=30 -notification_timeout=30 -ocsp_timeout=5 -perfdata_timeout=5 - - - -# RETAIN STATE INFORMATION -# This setting determines whether or not Nagios will save state -# information for services and hosts before it shuts down. Upon -# startup Nagios will reload all saved service and host state -# information before starting to monitor. This is useful for -# maintaining long-term data on state statistics, etc, but will -# slow Nagios down a bit when it (re)starts. Since its only -# a one-time penalty, I think its well worth the additional -# startup delay. - -retain_state_information=1 - - - -# STATE RETENTION FILE -# This is the file that Nagios should use to store host and -# service state information before it shuts down. The state -# information in this file is also read immediately prior to -# starting to monitor the network when Nagios is restarted. -# This file is used only if the retain_state_information -# variable is set to 1. - -state_retention_file=/var/log/nagios/retention.dat - - - -# RETENTION DATA UPDATE INTERVAL -# This setting determines how often (in minutes) that Nagios -# will automatically save retention data during normal operation. -# If you set this value to 0, Nagios will not save retention -# data at regular interval, but it will still save retention -# data before shutting down or restarting. If you have disabled -# state retention, this option has no effect. - -retention_update_interval=60 - - - -# USE RETAINED PROGRAM STATE -# This setting determines whether or not Nagios will set -# program status variables based on the values saved in the -# retention file. If you want to use retained program status -# information, set this value to 1. If not, set this value -# to 0. - -use_retained_program_state=1 - - - -# USE RETAINED SCHEDULING INFO -# This setting determines whether or not Nagios will retain -# the scheduling info (next check time) for hosts and services -# based on the values saved in the retention file. If you -# If you want to use retained scheduling info, set this -# value to 1. If not, set this value to 0. - -use_retained_scheduling_info=1 - - - -# RETAINED ATTRIBUTE MASKS (ADVANCED FEATURE) -# The following variables are used to specify specific host and -# service attributes that should *not* be retained by Nagios during -# program restarts. -# -# The values of the masks are bitwise ANDs of values specified -# by the "MODATTR_" definitions found in include/common.h. -# For example, if you do not want the current enabled/disabled state -# of flap detection and event handlers for hosts to be retained, you -# would use a value of 24 for the host attribute mask... -# MODATTR_EVENT_HANDLER_ENABLED (8) + MODATTR_FLAP_DETECTION_ENABLED (16) = 24 - -# This mask determines what host attributes are not retained -retained_host_attribute_mask=0 - -# This mask determines what service attributes are not retained -retained_service_attribute_mask=0 - -# These two masks determine what process attributes are not retained. -# There are two masks, because some process attributes have host and service -# options. For example, you can disable active host checks, but leave active -# service checks enabled. -retained_process_host_attribute_mask=0 -retained_process_service_attribute_mask=0 - -# These two masks determine what contact attributes are not retained. -# There are two masks, because some contact attributes have host and -# service options. For example, you can disable host notifications for -# a contact, but leave service notifications enabled for them. -retained_contact_host_attribute_mask=0 -retained_contact_service_attribute_mask=0 - - - -# INTERVAL LENGTH -# This is the seconds per unit interval as used in the -# host/contact/service configuration files. Setting this to 60 means -# that each interval is one minute long (60 seconds). Other settings -# have not been tested much, so your mileage is likely to vary... - -interval_length=60 - - - -# CHECK FOR UPDATES -# This option determines whether Nagios will automatically check to -# see if new updates (releases) are available. It is recommend that you -# enable this option to ensure that you stay on top of the latest critical -# patches to Nagios. Nagios is critical to you - make sure you keep it in -# good shape. Nagios will check once a day for new updates. Data collected -# by Nagios Enterprises from the update check is processed in accordance -# with our privacy policy - see http://api.nagios.org for details. - -check_for_updates=1 - - - -# BARE UPDATE CHECK -# This option deterines what data Nagios will send to api.nagios.org when -# it checks for updates. By default, Nagios will send information on the -# current version of Nagios you have installed, as well as an indicator as -# to whether this was a new installation or not. Nagios Enterprises uses -# this data to determine the number of users running specific version of -# Nagios. Enable this option if you do not want this information to be sent. - -bare_update_check=0 - - - -# AGGRESSIVE HOST CHECKING OPTION -# If you don't want to turn on aggressive host checking features, set -# this value to 0 (the default). Otherwise set this value to 1 to -# enable the aggressive check option. Read the docs for more info -# on what aggressive host check is or check out the source code in -# base/checks.c - -use_aggressive_host_checking=0 - - - -# SERVICE CHECK EXECUTION OPTION -# This determines whether or not Nagios will actively execute -# service checks when it initially starts. If this option is -# disabled, checks are not actively made, but Nagios can still -# receive and process passive check results that come in. Unless -# you're implementing redundant hosts or have a special need for -# disabling the execution of service checks, leave this enabled! -# Values: 1 = enable checks, 0 = disable checks - -execute_service_checks=1 - - - -# PASSIVE SERVICE CHECK ACCEPTANCE OPTION -# This determines whether or not Nagios will accept passive -# service checks results when it initially (re)starts. -# Values: 1 = accept passive checks, 0 = reject passive checks - -accept_passive_service_checks=1 - - - -# HOST CHECK EXECUTION OPTION -# This determines whether or not Nagios will actively execute -# host checks when it initially starts. If this option is -# disabled, checks are not actively made, but Nagios can still -# receive and process passive check results that come in. Unless -# you're implementing redundant hosts or have a special need for -# disabling the execution of host checks, leave this enabled! -# Values: 1 = enable checks, 0 = disable checks - -execute_host_checks=1 - - - -# PASSIVE HOST CHECK ACCEPTANCE OPTION -# This determines whether or not Nagios will accept passive -# host checks results when it initially (re)starts. -# Values: 1 = accept passive checks, 0 = reject passive checks - -accept_passive_host_checks=1 - - - -# NOTIFICATIONS OPTION -# This determines whether or not Nagios will sent out any host or -# service notifications when it is initially (re)started. -# Values: 1 = enable notifications, 0 = disable notifications - -enable_notifications=1 - - - -# EVENT HANDLER USE OPTION -# This determines whether or not Nagios will run any host or -# service event handlers when it is initially (re)started. Unless -# you're implementing redundant hosts, leave this option enabled. -# Values: 1 = enable event handlers, 0 = disable event handlers - -enable_event_handlers=1 - - - -# PROCESS PERFORMANCE DATA OPTION -# This determines whether or not Nagios will process performance -# data returned from service and host checks. If this option is -# enabled, host performance data will be processed using the -# host_perfdata_command (defined below) and service performance -# data will be processed using the service_perfdata_command (also -# defined below). Read the HTML docs for more information on -# performance data. -# Values: 1 = process performance data, 0 = do not process performance data - -process_performance_data=0 - - - -# HOST AND SERVICE PERFORMANCE DATA PROCESSING COMMANDS -# These commands are run after every host and service check is -# performed. These commands are executed only if the -# enable_performance_data option (above) is set to 1. The command -# argument is the short name of a command definition that you -# define in your host configuration file. Read the HTML docs for -# more information on performance data. - -#host_perfdata_command=process-host-perfdata -#service_perfdata_command=process-service-perfdata - - - -# HOST AND SERVICE PERFORMANCE DATA FILES -# These files are used to store host and service performance data. -# Performance data is only written to these files if the -# enable_performance_data option (above) is set to 1. - -#host_perfdata_file=/var/log/nagios/host-perfdata -#service_perfdata_file=/var/log/nagios/service-perfdata - - - -# HOST AND SERVICE PERFORMANCE DATA FILE TEMPLATES -# These options determine what data is written (and how) to the -# performance data files. The templates may contain macros, special -# characters (\t for tab, \r for carriage return, \n for newline) -# and plain text. A newline is automatically added after each write -# to the performance data file. Some examples of what you can do are -# shown below. - -#host_perfdata_file_template=[HOSTPERFDATA]\t$TIMET$\t$HOSTNAME$\t$HOSTEXECUTIONTIME$\t$HOSTOUTPUT$\t$HOSTPERFDATA$ -#service_perfdata_file_template=[SERVICEPERFDATA]\t$TIMET$\t$HOSTNAME$\t$SERVICEDESC$\t$SERVICEEXECUTIONTIME$\t$SERVICELATENCY$\t$SERVICEOUTPUT$\t$SERVICEPERFDATA$ - - - -# HOST AND SERVICE PERFORMANCE DATA FILE MODES -# This option determines whether or not the host and service -# performance data files are opened in write ("w") or append ("a") -# mode. If you want to use named pipes, you should use the special -# pipe ("p") mode which avoid blocking at startup, otherwise you will -# likely want the defult append ("a") mode. - -#host_perfdata_file_mode=a -#service_perfdata_file_mode=a - - - -# HOST AND SERVICE PERFORMANCE DATA FILE PROCESSING INTERVAL -# These options determine how often (in seconds) the host and service -# performance data files are processed using the commands defined -# below. A value of 0 indicates the files should not be periodically -# processed. - -#host_perfdata_file_processing_interval=0 -#service_perfdata_file_processing_interval=0 - - - -# HOST AND SERVICE PERFORMANCE DATA FILE PROCESSING COMMANDS -# These commands are used to periodically process the host and -# service performance data files. The interval at which the -# processing occurs is determined by the options above. - -#host_perfdata_file_processing_command=process-host-perfdata-file -#service_perfdata_file_processing_command=process-service-perfdata-file - - - -# HOST AND SERVICE PERFORMANCE DATA PROCESS EMPTY RESULTS -# These options determine wether the core will process empty perfdata -# results or not. This is needed for distributed monitoring, and intentionally -# turned on by default. -# If you don't require empty perfdata - saving some cpu cycles -# on unwanted macro calculation - you can turn that off. Be careful! -# Values: 1 = enable, 0 = disable - -#host_perfdata_process_empty_results=1 -#service_perfdata_process_empty_results=1 - - -# OBSESS OVER SERVICE CHECKS OPTION -# This determines whether or not Nagios will obsess over service -# checks and run the ocsp_command defined below. Unless you're -# planning on implementing distributed monitoring, do not enable -# this option. Read the HTML docs for more information on -# implementing distributed monitoring. -# Values: 1 = obsess over services, 0 = do not obsess (default) - -obsess_over_services=0 - - - -# OBSESSIVE COMPULSIVE SERVICE PROCESSOR COMMAND -# This is the command that is run for every service check that is -# processed by Nagios. This command is executed only if the -# obsess_over_services option (above) is set to 1. The command -# argument is the short name of a command definition that you -# define in your host configuration file. Read the HTML docs for -# more information on implementing distributed monitoring. - -#ocsp_command=somecommand - - - -# OBSESS OVER HOST CHECKS OPTION -# This determines whether or not Nagios will obsess over host -# checks and run the ochp_command defined below. Unless you're -# planning on implementing distributed monitoring, do not enable -# this option. Read the HTML docs for more information on -# implementing distributed monitoring. -# Values: 1 = obsess over hosts, 0 = do not obsess (default) - -obsess_over_hosts=0 - - - -# OBSESSIVE COMPULSIVE HOST PROCESSOR COMMAND -# This is the command that is run for every host check that is -# processed by Nagios. This command is executed only if the -# obsess_over_hosts option (above) is set to 1. The command -# argument is the short name of a command definition that you -# define in your host configuration file. Read the HTML docs for -# more information on implementing distributed monitoring. - -#ochp_command=somecommand - - - -# TRANSLATE PASSIVE HOST CHECKS OPTION -# This determines whether or not Nagios will translate -# DOWN/UNREACHABLE passive host check results into their proper -# state for this instance of Nagios. This option is useful -# if you have distributed or failover monitoring setup. In -# these cases your other Nagios servers probably have a different -# "view" of the network, with regards to the parent/child relationship -# of hosts. If a distributed monitoring server thinks a host -# is DOWN, it may actually be UNREACHABLE from the point of -# this Nagios instance. Enabling this option will tell Nagios -# to translate any DOWN or UNREACHABLE host states it receives -# passively into the correct state from the view of this server. -# Values: 1 = perform translation, 0 = do not translate (default) - -translate_passive_host_checks=0 - - - -# PASSIVE HOST CHECKS ARE SOFT OPTION -# This determines whether or not Nagios will treat passive host -# checks as being HARD or SOFT. By default, a passive host check -# result will put a host into a HARD state type. This can be changed -# by enabling this option. -# Values: 0 = passive checks are HARD, 1 = passive checks are SOFT - -passive_host_checks_are_soft=0 - - - -# ORPHANED HOST/SERVICE CHECK OPTIONS -# These options determine whether or not Nagios will periodically -# check for orphaned host service checks. Since service checks are -# not rescheduled until the results of their previous execution -# instance are processed, there exists a possibility that some -# checks may never get rescheduled. A similar situation exists for -# host checks, although the exact scheduling details differ a bit -# from service checks. Orphaned checks seem to be a rare -# problem and should not happen under normal circumstances. -# If you have problems with service checks never getting -# rescheduled, make sure you have orphaned service checks enabled. -# Values: 1 = enable checks, 0 = disable checks - -check_for_orphaned_services=1 -check_for_orphaned_hosts=1 - - - -# SERVICE FRESHNESS CHECK OPTION -# This option determines whether or not Nagios will periodically -# check the "freshness" of service results. Enabling this option -# is useful for ensuring passive checks are received in a timely -# manner. -# Values: 1 = enabled freshness checking, 0 = disable freshness checking - -check_service_freshness=1 - - - -# SERVICE FRESHNESS CHECK INTERVAL -# This setting determines how often (in seconds) Nagios will -# check the "freshness" of service check results. If you have -# disabled service freshness checking, this option has no effect. - -service_freshness_check_interval=60 - - - -# SERVICE CHECK TIMEOUT STATE -# This setting determines the state Nagios will report when a -# service check times out - that is does not respond within -# service_check_timeout seconds. This can be useful if a -# machine is running at too high a load and you do not want -# to consider a failed service check to be critical (the default). -# Valid settings are: -# c - Critical (default) -# u - Unknown -# w - Warning -# o - OK - -service_check_timeout_state=c - - - -# HOST FRESHNESS CHECK OPTION -# This option determines whether or not Nagios will periodically -# check the "freshness" of host results. Enabling this option -# is useful for ensuring passive checks are received in a timely -# manner. -# Values: 1 = enabled freshness checking, 0 = disable freshness checking - -check_host_freshness=0 - - - -# HOST FRESHNESS CHECK INTERVAL -# This setting determines how often (in seconds) Nagios will -# check the "freshness" of host check results. If you have -# disabled host freshness checking, this option has no effect. - -host_freshness_check_interval=60 - - - - -# ADDITIONAL FRESHNESS THRESHOLD LATENCY -# This setting determines the number of seconds that Nagios -# will add to any host and service freshness thresholds that -# it calculates (those not explicitly specified by the user). - -additional_freshness_latency=15 - - - - -# FLAP DETECTION OPTION -# This option determines whether or not Nagios will try -# and detect hosts and services that are "flapping". -# Flapping occurs when a host or service changes between -# states too frequently. When Nagios detects that a -# host or service is flapping, it will temporarily suppress -# notifications for that host/service until it stops -# flapping. Flap detection is very experimental, so read -# the HTML documentation before enabling this feature! -# Values: 1 = enable flap detection -# 0 = disable flap detection (default) - -enable_flap_detection=1 - - - -# FLAP DETECTION THRESHOLDS FOR HOSTS AND SERVICES -# Read the HTML documentation on flap detection for -# an explanation of what this option does. This option -# has no effect if flap detection is disabled. - -low_service_flap_threshold=5.0 -high_service_flap_threshold=20.0 -low_host_flap_threshold=5.0 -high_host_flap_threshold=20.0 - - - -# DATE FORMAT OPTION -# This option determines how short dates are displayed. Valid options -# include: -# us (MM-DD-YYYY HH:MM:SS) -# euro (DD-MM-YYYY HH:MM:SS) -# iso8601 (YYYY-MM-DD HH:MM:SS) -# strict-iso8601 (YYYY-MM-DDTHH:MM:SS) -# - -date_format=us - - - - -# TIMEZONE OFFSET -# This option is used to override the default timezone that this -# instance of Nagios runs in. If not specified, Nagios will use -# the system configured timezone. -# -# NOTE: In order to display the correct timezone in the CGIs, you -# will also need to alter the Apache directives for the CGI path -# to include your timezone. Example: -# -# -# SetEnv TZ "Australia/Brisbane" -# ... -# - -#use_timezone=US/Mountain -#use_timezone=Australia/Brisbane - - - -# ILLEGAL OBJECT NAME CHARACTERS -# This option allows you to specify illegal characters that cannot -# be used in host names, service descriptions, or names of other -# object types. - -illegal_object_name_chars=`~!$%^&*|'"<>?,()= - - - -# ILLEGAL MACRO OUTPUT CHARACTERS -# This option allows you to specify illegal characters that are -# stripped from macros before being used in notifications, event -# handlers, etc. This DOES NOT affect macros used in service or -# host check commands. -# The following macros are stripped of the characters you specify: -# $HOSTOUTPUT$ -# $HOSTPERFDATA$ -# $HOSTACKAUTHOR$ -# $HOSTACKCOMMENT$ -# $SERVICEOUTPUT$ -# $SERVICEPERFDATA$ -# $SERVICEACKAUTHOR$ -# $SERVICEACKCOMMENT$ - -illegal_macro_output_chars=`~$&|'"<> - - - -# REGULAR EXPRESSION MATCHING -# This option controls whether or not regular expression matching -# takes place in the object config files. Regular expression -# matching is used to match host, hostgroup, service, and service -# group names/descriptions in some fields of various object types. -# Values: 1 = enable regexp matching, 0 = disable regexp matching - -use_regexp_matching=0 - - - -# "TRUE" REGULAR EXPRESSION MATCHING -# This option controls whether or not "true" regular expression -# matching takes place in the object config files. This option -# only has an effect if regular expression matching is enabled -# (see above). If this option is DISABLED, regular expression -# matching only occurs if a string contains wildcard characters -# (* and ?). If the option is ENABLED, regexp matching occurs -# all the time (which can be annoying). -# Values: 1 = enable true matching, 0 = disable true matching - -use_true_regexp_matching=0 - - - -# ADMINISTRATOR EMAIL/PAGER ADDRESSES -# The email and pager address of a global administrator (likely you). -# Nagios never uses these values itself, but you can access them by -# using the $ADMINEMAIL$ and $ADMINPAGER$ macros in your notification -# commands. - -admin_email=nagios@localhost -admin_pager=pagenagios@localhost - - - -# DAEMON CORE DUMP OPTION -# This option determines whether or not Nagios is allowed to create -# a core dump when it runs as a daemon. Note that it is generally -# considered bad form to allow this, but it may be useful for -# debugging purposes. Enabling this option doesn't guarantee that -# a core file will be produced, but that's just life... -# Values: 1 - Allow core dumps -# 0 - Do not allow core dumps (default) - -daemon_dumps_core=0 - - - -# LARGE INSTALLATION TWEAKS OPTION -# This option determines whether or not Nagios will take some shortcuts -# which can save on memory and CPU usage in large Nagios installations. -# Read the documentation for more information on the benefits/tradeoffs -# of enabling this option. -# Values: 1 - Enabled tweaks -# 0 - Disable tweaks (default) - -use_large_installation_tweaks=0 - - - -# ENABLE ENVIRONMENT MACROS -# This option determines whether or not Nagios will make all standard -# macros available as environment variables when host/service checks -# and system commands (event handlers, notifications, etc.) are -# executed. -# Enabling this is a very bad idea for anything but very small setups, -# as it means plugins, notification scripts and eventhandlers may run -# out of environment space. It will also cause a significant increase -# in CPU- and memory usage and drastically reduce the number of checks -# you can run. -# Values: 1 - Enable environment variable macros -# 0 - Disable environment variable macros (default) - -enable_environment_macros=0 - - - -# CHILD PROCESS MEMORY OPTION -# This option determines whether or not Nagios will free memory in -# child processes (processed used to execute system commands and host/ -# service checks). If you specify a value here, it will override -# program defaults. -# Value: 1 - Free memory in child processes -# 0 - Do not free memory in child processes - -#free_child_process_memory=1 - - - -# CHILD PROCESS FORKING BEHAVIOR -# This option determines how Nagios will fork child processes -# (used to execute system commands and host/service checks). Normally -# child processes are fork()ed twice, which provides a very high level -# of isolation from problems. Fork()ing once is probably enough and will -# save a great deal on CPU usage (in large installs), so you might -# want to consider using this. If you specify a value here, it will -# program defaults. -# Value: 1 - Child processes fork() twice -# 0 - Child processes fork() just once - -#child_processes_fork_twice=1 - - - -# DEBUG LEVEL -# This option determines how much (if any) debugging information will -# be written to the debug file. OR values together to log multiple -# types of information. -# Values: -# -1 = Everything -# 0 = Nothing -# 1 = Functions -# 2 = Configuration -# 4 = Process information -# 8 = Scheduled events -# 16 = Host/service checks -# 32 = Notifications -# 64 = Event broker -# 128 = External commands -# 256 = Commands -# 512 = Scheduled downtime -# 1024 = Comments -# 2048 = Macros - -debug_level=0 - - - -# DEBUG VERBOSITY -# This option determines how verbose the debug log out will be. -# Values: 0 = Brief output -# 1 = More detailed -# 2 = Very detailed - -debug_verbosity=1 - - - -# DEBUG FILE -# This option determines where Nagios should write debugging information. - -debug_file=/var/log/nagios/nagios.debug - - - -# MAX DEBUG FILE SIZE -# This option determines the maximum size (in bytes) of the debug file. If -# the file grows larger than this size, it will be renamed with a .old -# extension. If a file already exists with a .old extension it will -# automatically be deleted. This helps ensure your disk space usage doesn't -# get out of control when debugging Nagios. - -max_debug_file_size=1000000 - - - -# Should we allow hostgroups to have no hosts, we default this to off since -# that was the old behavior - -allow_empty_hostgroup_assignment=0 - - - -# Normally worker count is dynamically allocated based on 1.5 * number of cpu's -# with a minimum of 4 workers. This value will override the defaults - -#check_workers=3 - - - -# EXPERIMENTAL load controlling options -# To get current defaults based on your system issue a command to -# the query handler. Please note that this is an experimental feature -# and not meant for production use. Used incorrectly it can induce -# enormous latency. -# #core loadctl -# jobs_max - The maximum amount of jobs to run at one time -# jobs_min - The minimum amount of jobs to run at one time -# jobs_limit - The maximum amount of jobs the current load lets us run -# backoff_limit - The minimum backoff_change -# backoff_change - # of jobs to remove from jobs_limit when backing off -# rampup_limit - Minimum rampup_change -# rampup_change - # of jobs to add to jobs_limit when ramping up -# NOTE: The backoff_limit and rampup_limit are NOT used by anything currently, -# so if your system is under load nothing will actively modify the jobs -# even if you have these options enabled, they are for external -# connector information only. However, if you change the jobs_max or -# jobs_min manually here or through the query handler interface that -# WILL affect your system -#loadctl_options=jobs_max=100;backoff_limit=10;rampup_change=5 diff --git a/templates/nagios.cfg.orig b/templates/nagios.cfg.orig deleted file mode 100644 index c9d3ed8b..00000000 --- a/templates/nagios.cfg.orig +++ /dev/null @@ -1,1322 +0,0 @@ -############################################################################## -# -# NAGIOS.CFG - Sample Main Config File for Nagios 3.3.1 -# -# Read the documentation for more information on this configuration -# file. I've provided some comments here, but things may not be so -# clear without further explanation. -# -# Last Modified: 12-14-2008 -# -############################################################################## - - -# LOG FILE -# This is the main log file where service and host events are logged -# for historical purposes. This should be the first option specified -# in the config file!!! - -log_file=/var/log/nagios/nagios.log - - - -# OBJECT CONFIGURATION FILE(S) -# These are the object configuration files in which you define hosts, -# host groups, contacts, contact groups, services, etc. -# You can split your object definitions across several config files -# if you wish (as shown below), or keep them all in a single config file. - -# You can specify individual object config files as shown below: -cfg_file=/etc/nagios/objects/commands.cfg -cfg_file=/etc/nagios/objects/contacts.cfg -cfg_file=/etc/nagios/objects/timeperiods.cfg -cfg_file=/etc/nagios/objects/templates.cfg - -# Definitions for monitoring the local (Linux) host -cfg_file=/etc/nagios/objects/localhost.cfg - -# Definitions for monitoring a Windows machine -#cfg_file=/etc/nagios/objects/windows.cfg - -# Definitions for monitoring a router/switch -#cfg_file=/etc/nagios/objects/switch.cfg - -# Definitions for monitoring a network printer -#cfg_file=/etc/nagios/objects/printer.cfg - - -# You can also tell Nagios to process all config files (with a .cfg -# extension) in a particular directory by using the cfg_dir -# directive as shown below: - -#cfg_dir=/etc/nagios/servers -#cfg_dir=/etc/nagios/printers -#cfg_dir=/etc/nagios/switches -#cfg_dir=/etc/nagios/routers - - - - -# OBJECT CACHE FILE -# This option determines where object definitions are cached when -# Nagios starts/restarts. The CGIs read object definitions from -# this cache file (rather than looking at the object config files -# directly) in order to prevent inconsistencies that can occur -# when the config files are modified after Nagios starts. - -object_cache_file=/var/log/nagios/objects.cache - - - -# PRE-CACHED OBJECT FILE -# This options determines the location of the precached object file. -# If you run Nagios with the -p command line option, it will preprocess -# your object configuration file(s) and write the cached config to this -# file. You can then start Nagios with the -u option to have it read -# object definitions from this precached file, rather than the standard -# object configuration files (see the cfg_file and cfg_dir options above). -# Using a precached object file can speed up the time needed to (re)start -# the Nagios process if you've got a large and/or complex configuration. -# Read the documentation section on optimizing Nagios to find our more -# about how this feature works. - -precached_object_file=/var/log/nagios/objects.precache - - - -# RESOURCE FILE -# This is an optional resource file that contains $USERx$ macro -# definitions. Multiple resource files can be specified by using -# multiple resource_file definitions. The CGIs will not attempt to -# read the contents of resource files, so information that is -# considered to be sensitive (usernames, passwords, etc) can be -# defined as macros in this file and restrictive permissions (600) -# can be placed on this file. - -resource_file=/etc/nagios/private/resource.cfg - - - -# STATUS FILE -# This is where the current status of all monitored services and -# hosts is stored. Its contents are read and processed by the CGIs. -# The contents of the status file are deleted every time Nagios -# restarts. - -status_file=/var/log/nagios/status.dat - - - -# STATUS FILE UPDATE INTERVAL -# This option determines the frequency (in seconds) that -# Nagios will periodically dump program, host, and -# service status data. - -status_update_interval=10 - - - -# NAGIOS USER -# This determines the effective user that Nagios should run as. -# You can either supply a username or a UID. - -nagios_user=nagios - - - -# NAGIOS GROUP -# This determines the effective group that Nagios should run as. -# You can either supply a group name or a GID. - -nagios_group=nagios - - - -# EXTERNAL COMMAND OPTION -# This option allows you to specify whether or not Nagios should check -# for external commands (in the command file defined below). By default -# Nagios will *not* check for external commands, just to be on the -# cautious side. If you want to be able to use the CGI command interface -# you will have to enable this. -# Values: 0 = disable commands, 1 = enable commands - -check_external_commands=1 - - - -# EXTERNAL COMMAND CHECK INTERVAL -# This is the interval at which Nagios should check for external commands. -# This value works of the interval_length you specify later. If you leave -# that at its default value of 60 (seconds), a value of 1 here will cause -# Nagios to check for external commands every minute. If you specify a -# number followed by an "s" (i.e. 15s), this will be interpreted to mean -# actual seconds rather than a multiple of the interval_length variable. -# Note: In addition to reading the external command file at regularly -# scheduled intervals, Nagios will also check for external commands after -# event handlers are executed. -# NOTE: Setting this value to -1 causes Nagios to check the external -# command file as often as possible. - -#command_check_interval=15s -command_check_interval=-1 - - - -# EXTERNAL COMMAND FILE -# This is the file that Nagios checks for external command requests. -# It is also where the command CGI will write commands that are submitted -# by users, so it must be writeable by the user that the web server -# is running as (usually 'nobody'). Permissions should be set at the -# directory level instead of on the file, as the file is deleted every -# time its contents are processed. - -command_file=/var/spool/nagios/cmd/nagios.cmd - - - -# EXTERNAL COMMAND BUFFER SLOTS -# This settings is used to tweak the number of items or "slots" that -# the Nagios daemon should allocate to the buffer that holds incoming -# external commands before they are processed. As external commands -# are processed by the daemon, they are removed from the buffer. - -external_command_buffer_slots=4096 - - - -# LOCK FILE -# This is the lockfile that Nagios will use to store its PID number -# in when it is running in daemon mode. - -lock_file=/var/run/nagios/nagios.pid - - - -# TEMP FILE -# This is a temporary file that is used as scratch space when Nagios -# updates the status log, cleans the comment file, etc. This file -# is created, used, and deleted throughout the time that Nagios is -# running. - -temp_file=/var/log/nagios/nagios.tmp - - - -# TEMP PATH -# This is path where Nagios can create temp files for service and -# host check results, etc. - -temp_path=/tmp - - - -# EVENT BROKER OPTIONS -# Controls what (if any) data gets sent to the event broker. -# Values: 0 = Broker nothing -# -1 = Broker everything -# = See documentation - -event_broker_options=-1 - - - -# EVENT BROKER MODULE(S) -# This directive is used to specify an event broker module that should -# by loaded by Nagios at startup. Use multiple directives if you want -# to load more than one module. Arguments that should be passed to -# the module at startup are seperated from the module path by a space. -# -#!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! -# WARNING !!! WARNING !!! WARNING !!! WARNING !!! WARNING !!! WARNING -#!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! -# -# Do NOT overwrite modules while they are being used by Nagios or Nagios -# will crash in a fiery display of SEGFAULT glory. This is a bug/limitation -# either in dlopen(), the kernel, and/or the filesystem. And maybe Nagios... -# -# The correct/safe way of updating a module is by using one of these methods: -# 1. Shutdown Nagios, replace the module file, restart Nagios -# 2. Delete the original module file, move the new module file into place, restart Nagios -# -# Example: -# -# broker_module= [moduleargs] - -#broker_module=/somewhere/module1.o -#broker_module=/somewhere/module2.o arg1 arg2=3 debug=0 - - - -# LOG ROTATION METHOD -# This is the log rotation method that Nagios should use to rotate -# the main log file. Values are as follows.. -# n = None - don't rotate the log -# h = Hourly rotation (top of the hour) -# d = Daily rotation (midnight every day) -# w = Weekly rotation (midnight on Saturday evening) -# m = Monthly rotation (midnight last day of month) - -log_rotation_method=d - - - -# LOG ARCHIVE PATH -# This is the directory where archived (rotated) log files should be -# placed (assuming you've chosen to do log rotation). - -log_archive_path=/var/log/nagios/archives - - - -# LOGGING OPTIONS -# If you want messages logged to the syslog facility, as well as the -# Nagios log file set this option to 1. If not, set it to 0. - -use_syslog=1 - - - -# NOTIFICATION LOGGING OPTION -# If you don't want notifications to be logged, set this value to 0. -# If notifications should be logged, set the value to 1. - -log_notifications=1 - - - -# SERVICE RETRY LOGGING OPTION -# If you don't want service check retries to be logged, set this value -# to 0. If retries should be logged, set the value to 1. - -log_service_retries=1 - - - -# HOST RETRY LOGGING OPTION -# If you don't want host check retries to be logged, set this value to -# 0. If retries should be logged, set the value to 1. - -log_host_retries=1 - - - -# EVENT HANDLER LOGGING OPTION -# If you don't want host and service event handlers to be logged, set -# this value to 0. If event handlers should be logged, set the value -# to 1. - -log_event_handlers=1 - - - -# INITIAL STATES LOGGING OPTION -# If you want Nagios to log all initial host and service states to -# the main log file (the first time the service or host is checked) -# you can enable this option by setting this value to 1. If you -# are not using an external application that does long term state -# statistics reporting, you do not need to enable this option. In -# this case, set the value to 0. - -log_initial_states=0 - - - -# EXTERNAL COMMANDS LOGGING OPTION -# If you don't want Nagios to log external commands, set this value -# to 0. If external commands should be logged, set this value to 1. -# Note: This option does not include logging of passive service -# checks - see the option below for controlling whether or not -# passive checks are logged. - -log_external_commands=1 - - - -# PASSIVE CHECKS LOGGING OPTION -# If you don't want Nagios to log passive host and service checks, set -# this value to 0. If passive checks should be logged, set -# this value to 1. - -log_passive_checks=1 - - - -# GLOBAL HOST AND SERVICE EVENT HANDLERS -# These options allow you to specify a host and service event handler -# command that is to be run for every host or service state change. -# The global event handler is executed immediately prior to the event -# handler that you have optionally specified in each host or -# service definition. The command argument is the short name of a -# command definition that you define in your host configuration file. -# Read the HTML docs for more information. - -#global_host_event_handler=somecommand -#global_service_event_handler=somecommand - - - -# SERVICE INTER-CHECK DELAY METHOD -# This is the method that Nagios should use when initially -# "spreading out" service checks when it starts monitoring. The -# default is to use smart delay calculation, which will try to -# space all service checks out evenly to minimize CPU load. -# Using the dumb setting will cause all checks to be scheduled -# at the same time (with no delay between them)! This is not a -# good thing for production, but is useful when testing the -# parallelization functionality. -# n = None - don't use any delay between checks -# d = Use a "dumb" delay of 1 second between checks -# s = Use "smart" inter-check delay calculation -# x.xx = Use an inter-check delay of x.xx seconds - -service_inter_check_delay_method=s - - - -# MAXIMUM SERVICE CHECK SPREAD -# This variable determines the timeframe (in minutes) from the -# program start time that an initial check of all services should -# be completed. Default is 30 minutes. - -max_service_check_spread=30 - - - -# SERVICE CHECK INTERLEAVE FACTOR -# This variable determines how service checks are interleaved. -# Interleaving the service checks allows for a more even -# distribution of service checks and reduced load on remote -# hosts. Setting this value to 1 is equivalent to how versions -# of Nagios previous to 0.0.5 did service checks. Set this -# value to s (smart) for automatic calculation of the interleave -# factor unless you have a specific reason to change it. -# s = Use "smart" interleave factor calculation -# x = Use an interleave factor of x, where x is a -# number greater than or equal to 1. - -service_interleave_factor=s - - - -# HOST INTER-CHECK DELAY METHOD -# This is the method that Nagios should use when initially -# "spreading out" host checks when it starts monitoring. The -# default is to use smart delay calculation, which will try to -# space all host checks out evenly to minimize CPU load. -# Using the dumb setting will cause all checks to be scheduled -# at the same time (with no delay between them)! -# n = None - don't use any delay between checks -# d = Use a "dumb" delay of 1 second between checks -# s = Use "smart" inter-check delay calculation -# x.xx = Use an inter-check delay of x.xx seconds - -host_inter_check_delay_method=s - - - -# MAXIMUM HOST CHECK SPREAD -# This variable determines the timeframe (in minutes) from the -# program start time that an initial check of all hosts should -# be completed. Default is 30 minutes. - -max_host_check_spread=30 - - - -# MAXIMUM CONCURRENT SERVICE CHECKS -# This option allows you to specify the maximum number of -# service checks that can be run in parallel at any given time. -# Specifying a value of 1 for this variable essentially prevents -# any service checks from being parallelized. A value of 0 -# will not restrict the number of concurrent checks that are -# being executed. - -max_concurrent_checks=0 - - - -# HOST AND SERVICE CHECK REAPER FREQUENCY -# This is the frequency (in seconds!) that Nagios will process -# the results of host and service checks. - -check_result_reaper_frequency=10 - - - - -# MAX CHECK RESULT REAPER TIME -# This is the max amount of time (in seconds) that a single -# check result reaper event will be allowed to run before -# returning control back to Nagios so it can perform other -# duties. - -max_check_result_reaper_time=30 - - - - -# CHECK RESULT PATH -# This is directory where Nagios stores the results of host and -# service checks that have not yet been processed. -# -# Note: Make sure that only one instance of Nagios has access -# to this directory! - -check_result_path=/var/log/nagios/spool/checkresults - - - - -# MAX CHECK RESULT FILE AGE -# This option determines the maximum age (in seconds) which check -# result files are considered to be valid. Files older than this -# threshold will be mercilessly deleted without further processing. - -max_check_result_file_age=3600 - - - - -# CACHED HOST CHECK HORIZON -# This option determines the maximum amount of time (in seconds) -# that the state of a previous host check is considered current. -# Cached host states (from host checks that were performed more -# recently that the timeframe specified by this value) can immensely -# improve performance in regards to the host check logic. -# Too high of a value for this option may result in inaccurate host -# states being used by Nagios, while a lower value may result in a -# performance hit for host checks. Use a value of 0 to disable host -# check caching. - -cached_host_check_horizon=15 - - - -# CACHED SERVICE CHECK HORIZON -# This option determines the maximum amount of time (in seconds) -# that the state of a previous service check is considered current. -# Cached service states (from service checks that were performed more -# recently that the timeframe specified by this value) can immensely -# improve performance in regards to predictive dependency checks. -# Use a value of 0 to disable service check caching. - -cached_service_check_horizon=15 - - - -# ENABLE PREDICTIVE HOST DEPENDENCY CHECKS -# This option determines whether or not Nagios will attempt to execute -# checks of hosts when it predicts that future dependency logic test -# may be needed. These predictive checks can help ensure that your -# host dependency logic works well. -# Values: -# 0 = Disable predictive checks -# 1 = Enable predictive checks (default) - -enable_predictive_host_dependency_checks=1 - - - -# ENABLE PREDICTIVE SERVICE DEPENDENCY CHECKS -# This option determines whether or not Nagios will attempt to execute -# checks of service when it predicts that future dependency logic test -# may be needed. These predictive checks can help ensure that your -# service dependency logic works well. -# Values: -# 0 = Disable predictive checks -# 1 = Enable predictive checks (default) - -enable_predictive_service_dependency_checks=1 - - - -# SOFT STATE DEPENDENCIES -# This option determines whether or not Nagios will use soft state -# information when checking host and service dependencies. Normally -# Nagios will only use the latest hard host or service state when -# checking dependencies. If you want it to use the latest state (regardless -# of whether its a soft or hard state type), enable this option. -# Values: -# 0 = Don't use soft state dependencies (default) -# 1 = Use soft state dependencies - -soft_state_dependencies=0 - - - -# TIME CHANGE ADJUSTMENT THRESHOLDS -# These options determine when Nagios will react to detected changes -# in system time (either forward or backwards). - -#time_change_threshold=900 - - - -# AUTO-RESCHEDULING OPTION -# This option determines whether or not Nagios will attempt to -# automatically reschedule active host and service checks to -# "smooth" them out over time. This can help balance the load on -# the monitoring server. -# WARNING: THIS IS AN EXPERIMENTAL FEATURE - IT CAN DEGRADE -# PERFORMANCE, RATHER THAN INCREASE IT, IF USED IMPROPERLY - -auto_reschedule_checks=0 - - - -# AUTO-RESCHEDULING INTERVAL -# This option determines how often (in seconds) Nagios will -# attempt to automatically reschedule checks. This option only -# has an effect if the auto_reschedule_checks option is enabled. -# Default is 30 seconds. -# WARNING: THIS IS AN EXPERIMENTAL FEATURE - IT CAN DEGRADE -# PERFORMANCE, RATHER THAN INCREASE IT, IF USED IMPROPERLY - -auto_rescheduling_interval=30 - - - -# AUTO-RESCHEDULING WINDOW -# This option determines the "window" of time (in seconds) that -# Nagios will look at when automatically rescheduling checks. -# Only host and service checks that occur in the next X seconds -# (determined by this variable) will be rescheduled. This option -# only has an effect if the auto_reschedule_checks option is -# enabled. Default is 180 seconds (3 minutes). -# WARNING: THIS IS AN EXPERIMENTAL FEATURE - IT CAN DEGRADE -# PERFORMANCE, RATHER THAN INCREASE IT, IF USED IMPROPERLY - -auto_rescheduling_window=180 - - - -# SLEEP TIME -# This is the number of seconds to sleep between checking for system -# events and service checks that need to be run. - -sleep_time=0.25 - - - -# TIMEOUT VALUES -# These options control how much time Nagios will allow various -# types of commands to execute before killing them off. Options -# are available for controlling maximum time allotted for -# service checks, host checks, event handlers, notifications, the -# ocsp command, and performance data commands. All values are in -# seconds. - -service_check_timeout=60 -host_check_timeout=30 -event_handler_timeout=30 -notification_timeout=30 -ocsp_timeout=5 -perfdata_timeout=5 - - - -# RETAIN STATE INFORMATION -# This setting determines whether or not Nagios will save state -# information for services and hosts before it shuts down. Upon -# startup Nagios will reload all saved service and host state -# information before starting to monitor. This is useful for -# maintaining long-term data on state statistics, etc, but will -# slow Nagios down a bit when it (re)starts. Since its only -# a one-time penalty, I think its well worth the additional -# startup delay. - -retain_state_information=1 - - - -# STATE RETENTION FILE -# This is the file that Nagios should use to store host and -# service state information before it shuts down. The state -# information in this file is also read immediately prior to -# starting to monitor the network when Nagios is restarted. -# This file is used only if the retain_state_information -# variable is set to 1. - -state_retention_file=/var/log/nagios/retention.dat - - - -# RETENTION DATA UPDATE INTERVAL -# This setting determines how often (in minutes) that Nagios -# will automatically save retention data during normal operation. -# If you set this value to 0, Nagios will not save retention -# data at regular interval, but it will still save retention -# data before shutting down or restarting. If you have disabled -# state retention, this option has no effect. - -retention_update_interval=60 - - - -# USE RETAINED PROGRAM STATE -# This setting determines whether or not Nagios will set -# program status variables based on the values saved in the -# retention file. If you want to use retained program status -# information, set this value to 1. If not, set this value -# to 0. - -use_retained_program_state=1 - - - -# USE RETAINED SCHEDULING INFO -# This setting determines whether or not Nagios will retain -# the scheduling info (next check time) for hosts and services -# based on the values saved in the retention file. If you -# If you want to use retained scheduling info, set this -# value to 1. If not, set this value to 0. - -use_retained_scheduling_info=1 - - - -# RETAINED ATTRIBUTE MASKS (ADVANCED FEATURE) -# The following variables are used to specify specific host and -# service attributes that should *not* be retained by Nagios during -# program restarts. -# -# The values of the masks are bitwise ANDs of values specified -# by the "MODATTR_" definitions found in include/common.h. -# For example, if you do not want the current enabled/disabled state -# of flap detection and event handlers for hosts to be retained, you -# would use a value of 24 for the host attribute mask... -# MODATTR_EVENT_HANDLER_ENABLED (8) + MODATTR_FLAP_DETECTION_ENABLED (16) = 24 - -# This mask determines what host attributes are not retained -retained_host_attribute_mask=0 - -# This mask determines what service attributes are not retained -retained_service_attribute_mask=0 - -# These two masks determine what process attributes are not retained. -# There are two masks, because some process attributes have host and service -# options. For example, you can disable active host checks, but leave active -# service checks enabled. -retained_process_host_attribute_mask=0 -retained_process_service_attribute_mask=0 - -# These two masks determine what contact attributes are not retained. -# There are two masks, because some contact attributes have host and -# service options. For example, you can disable host notifications for -# a contact, but leave service notifications enabled for them. -retained_contact_host_attribute_mask=0 -retained_contact_service_attribute_mask=0 - - - -# INTERVAL LENGTH -# This is the seconds per unit interval as used in the -# host/contact/service configuration files. Setting this to 60 means -# that each interval is one minute long (60 seconds). Other settings -# have not been tested much, so your mileage is likely to vary... - -interval_length=60 - - - -# CHECK FOR UPDATES -# This option determines whether Nagios will automatically check to -# see if new updates (releases) are available. It is recommend that you -# enable this option to ensure that you stay on top of the latest critical -# patches to Nagios. Nagios is critical to you - make sure you keep it in -# good shape. Nagios will check once a day for new updates. Data collected -# by Nagios Enterprises from the update check is processed in accordance -# with our privacy policy - see http://api.nagios.org for details. - -check_for_updates=1 - - - -# BARE UPDATE CHECK -# This option deterines what data Nagios will send to api.nagios.org when -# it checks for updates. By default, Nagios will send information on the -# current version of Nagios you have installed, as well as an indicator as -# to whether this was a new installation or not. Nagios Enterprises uses -# this data to determine the number of users running specific version of -# Nagios. Enable this option if you do not want this information to be sent. - -bare_update_check=0 - - - -# AGGRESSIVE HOST CHECKING OPTION -# If you don't want to turn on aggressive host checking features, set -# this value to 0 (the default). Otherwise set this value to 1 to -# enable the aggressive check option. Read the docs for more info -# on what aggressive host check is or check out the source code in -# base/checks.c - -use_aggressive_host_checking=0 - - - -# SERVICE CHECK EXECUTION OPTION -# This determines whether or not Nagios will actively execute -# service checks when it initially starts. If this option is -# disabled, checks are not actively made, but Nagios can still -# receive and process passive check results that come in. Unless -# you're implementing redundant hosts or have a special need for -# disabling the execution of service checks, leave this enabled! -# Values: 1 = enable checks, 0 = disable checks - -execute_service_checks=1 - - - -# PASSIVE SERVICE CHECK ACCEPTANCE OPTION -# This determines whether or not Nagios will accept passive -# service checks results when it initially (re)starts. -# Values: 1 = accept passive checks, 0 = reject passive checks - -accept_passive_service_checks=1 - - - -# HOST CHECK EXECUTION OPTION -# This determines whether or not Nagios will actively execute -# host checks when it initially starts. If this option is -# disabled, checks are not actively made, but Nagios can still -# receive and process passive check results that come in. Unless -# you're implementing redundant hosts or have a special need for -# disabling the execution of host checks, leave this enabled! -# Values: 1 = enable checks, 0 = disable checks - -execute_host_checks=1 - - - -# PASSIVE HOST CHECK ACCEPTANCE OPTION -# This determines whether or not Nagios will accept passive -# host checks results when it initially (re)starts. -# Values: 1 = accept passive checks, 0 = reject passive checks - -accept_passive_host_checks=1 - - - -# NOTIFICATIONS OPTION -# This determines whether or not Nagios will sent out any host or -# service notifications when it is initially (re)started. -# Values: 1 = enable notifications, 0 = disable notifications - -enable_notifications=1 - - - -# EVENT HANDLER USE OPTION -# This determines whether or not Nagios will run any host or -# service event handlers when it is initially (re)started. Unless -# you're implementing redundant hosts, leave this option enabled. -# Values: 1 = enable event handlers, 0 = disable event handlers - -enable_event_handlers=1 - - - -# PROCESS PERFORMANCE DATA OPTION -# This determines whether or not Nagios will process performance -# data returned from service and host checks. If this option is -# enabled, host performance data will be processed using the -# host_perfdata_command (defined below) and service performance -# data will be processed using the service_perfdata_command (also -# defined below). Read the HTML docs for more information on -# performance data. -# Values: 1 = process performance data, 0 = do not process performance data - -process_performance_data=0 - - - -# HOST AND SERVICE PERFORMANCE DATA PROCESSING COMMANDS -# These commands are run after every host and service check is -# performed. These commands are executed only if the -# enable_performance_data option (above) is set to 1. The command -# argument is the short name of a command definition that you -# define in your host configuration file. Read the HTML docs for -# more information on performance data. - -#host_perfdata_command=process-host-perfdata -#service_perfdata_command=process-service-perfdata - - - -# HOST AND SERVICE PERFORMANCE DATA FILES -# These files are used to store host and service performance data. -# Performance data is only written to these files if the -# enable_performance_data option (above) is set to 1. - -#host_perfdata_file=/tmp/host-perfdata -#service_perfdata_file=/tmp/service-perfdata - - - -# HOST AND SERVICE PERFORMANCE DATA FILE TEMPLATES -# These options determine what data is written (and how) to the -# performance data files. The templates may contain macros, special -# characters (\t for tab, \r for carriage return, \n for newline) -# and plain text. A newline is automatically added after each write -# to the performance data file. Some examples of what you can do are -# shown below. - -#host_perfdata_file_template=[HOSTPERFDATA]\t$TIMET$\t$HOSTNAME$\t$HOSTEXECUTIONTIME$\t$HOSTOUTPUT$\t$HOSTPERFDATA$ -#service_perfdata_file_template=[SERVICEPERFDATA]\t$TIMET$\t$HOSTNAME$\t$SERVICEDESC$\t$SERVICEEXECUTIONTIME$\t$SERVICELATENCY$\t$SERVICEOUTPUT$\t$SERVICEPERFDATA$ - - - -# HOST AND SERVICE PERFORMANCE DATA FILE MODES -# This option determines whether or not the host and service -# performance data files are opened in write ("w") or append ("a") -# mode. If you want to use named pipes, you should use the special -# pipe ("p") mode which avoid blocking at startup, otherwise you will -# likely want the defult append ("a") mode. - -#host_perfdata_file_mode=a -#service_perfdata_file_mode=a - - - -# HOST AND SERVICE PERFORMANCE DATA FILE PROCESSING INTERVAL -# These options determine how often (in seconds) the host and service -# performance data files are processed using the commands defined -# below. A value of 0 indicates the files should not be periodically -# processed. - -#host_perfdata_file_processing_interval=0 -#service_perfdata_file_processing_interval=0 - - - -# HOST AND SERVICE PERFORMANCE DATA FILE PROCESSING COMMANDS -# These commands are used to periodically process the host and -# service performance data files. The interval at which the -# processing occurs is determined by the options above. - -#host_perfdata_file_processing_command=process-host-perfdata-file -#service_perfdata_file_processing_command=process-service-perfdata-file - - - -# OBSESS OVER SERVICE CHECKS OPTION -# This determines whether or not Nagios will obsess over service -# checks and run the ocsp_command defined below. Unless you're -# planning on implementing distributed monitoring, do not enable -# this option. Read the HTML docs for more information on -# implementing distributed monitoring. -# Values: 1 = obsess over services, 0 = do not obsess (default) - -obsess_over_services=0 - - - -# OBSESSIVE COMPULSIVE SERVICE PROCESSOR COMMAND -# This is the command that is run for every service check that is -# processed by Nagios. This command is executed only if the -# obsess_over_services option (above) is set to 1. The command -# argument is the short name of a command definition that you -# define in your host configuration file. Read the HTML docs for -# more information on implementing distributed monitoring. - -#ocsp_command=somecommand - - - -# OBSESS OVER HOST CHECKS OPTION -# This determines whether or not Nagios will obsess over host -# checks and run the ochp_command defined below. Unless you're -# planning on implementing distributed monitoring, do not enable -# this option. Read the HTML docs for more information on -# implementing distributed monitoring. -# Values: 1 = obsess over hosts, 0 = do not obsess (default) - -obsess_over_hosts=0 - - - -# OBSESSIVE COMPULSIVE HOST PROCESSOR COMMAND -# This is the command that is run for every host check that is -# processed by Nagios. This command is executed only if the -# obsess_over_hosts option (above) is set to 1. The command -# argument is the short name of a command definition that you -# define in your host configuration file. Read the HTML docs for -# more information on implementing distributed monitoring. - -#ochp_command=somecommand - - - -# TRANSLATE PASSIVE HOST CHECKS OPTION -# This determines whether or not Nagios will translate -# DOWN/UNREACHABLE passive host check results into their proper -# state for this instance of Nagios. This option is useful -# if you have distributed or failover monitoring setup. In -# these cases your other Nagios servers probably have a different -# "view" of the network, with regards to the parent/child relationship -# of hosts. If a distributed monitoring server thinks a host -# is DOWN, it may actually be UNREACHABLE from the point of -# this Nagios instance. Enabling this option will tell Nagios -# to translate any DOWN or UNREACHABLE host states it receives -# passively into the correct state from the view of this server. -# Values: 1 = perform translation, 0 = do not translate (default) - -translate_passive_host_checks=0 - - - -# PASSIVE HOST CHECKS ARE SOFT OPTION -# This determines whether or not Nagios will treat passive host -# checks as being HARD or SOFT. By default, a passive host check -# result will put a host into a HARD state type. This can be changed -# by enabling this option. -# Values: 0 = passive checks are HARD, 1 = passive checks are SOFT - -passive_host_checks_are_soft=0 - - - -# ORPHANED HOST/SERVICE CHECK OPTIONS -# These options determine whether or not Nagios will periodically -# check for orphaned host service checks. Since service checks are -# not rescheduled until the results of their previous execution -# instance are processed, there exists a possibility that some -# checks may never get rescheduled. A similar situation exists for -# host checks, although the exact scheduling details differ a bit -# from service checks. Orphaned checks seem to be a rare -# problem and should not happen under normal circumstances. -# If you have problems with service checks never getting -# rescheduled, make sure you have orphaned service checks enabled. -# Values: 1 = enable checks, 0 = disable checks - -check_for_orphaned_services=1 -check_for_orphaned_hosts=1 - - - -# SERVICE FRESHNESS CHECK OPTION -# This option determines whether or not Nagios will periodically -# check the "freshness" of service results. Enabling this option -# is useful for ensuring passive checks are received in a timely -# manner. -# Values: 1 = enabled freshness checking, 0 = disable freshness checking - -check_service_freshness=1 - - - -# SERVICE FRESHNESS CHECK INTERVAL -# This setting determines how often (in seconds) Nagios will -# check the "freshness" of service check results. If you have -# disabled service freshness checking, this option has no effect. - -service_freshness_check_interval=60 - - - -# HOST FRESHNESS CHECK OPTION -# This option determines whether or not Nagios will periodically -# check the "freshness" of host results. Enabling this option -# is useful for ensuring passive checks are received in a timely -# manner. -# Values: 1 = enabled freshness checking, 0 = disable freshness checking - -check_host_freshness=0 - - - -# HOST FRESHNESS CHECK INTERVAL -# This setting determines how often (in seconds) Nagios will -# check the "freshness" of host check results. If you have -# disabled host freshness checking, this option has no effect. - -host_freshness_check_interval=60 - - - - -# ADDITIONAL FRESHNESS THRESHOLD LATENCY -# This setting determines the number of seconds that Nagios -# will add to any host and service freshness thresholds that -# it calculates (those not explicitly specified by the user). - -additional_freshness_latency=15 - - - - -# FLAP DETECTION OPTION -# This option determines whether or not Nagios will try -# and detect hosts and services that are "flapping". -# Flapping occurs when a host or service changes between -# states too frequently. When Nagios detects that a -# host or service is flapping, it will temporarily suppress -# notifications for that host/service until it stops -# flapping. Flap detection is very experimental, so read -# the HTML documentation before enabling this feature! -# Values: 1 = enable flap detection -# 0 = disable flap detection (default) - -enable_flap_detection=1 - - - -# FLAP DETECTION THRESHOLDS FOR HOSTS AND SERVICES -# Read the HTML documentation on flap detection for -# an explanation of what this option does. This option -# has no effect if flap detection is disabled. - -low_service_flap_threshold=5.0 -high_service_flap_threshold=20.0 -low_host_flap_threshold=5.0 -high_host_flap_threshold=20.0 - - - -# DATE FORMAT OPTION -# This option determines how short dates are displayed. Valid options -# include: -# us (MM-DD-YYYY HH:MM:SS) -# euro (DD-MM-YYYY HH:MM:SS) -# iso8601 (YYYY-MM-DD HH:MM:SS) -# strict-iso8601 (YYYY-MM-DDTHH:MM:SS) -# - -date_format=us - - - - -# TIMEZONE OFFSET -# This option is used to override the default timezone that this -# instance of Nagios runs in. If not specified, Nagios will use -# the system configured timezone. -# -# NOTE: In order to display the correct timezone in the CGIs, you -# will also need to alter the Apache directives for the CGI path -# to include your timezone. Example: -# -# -# SetEnv TZ "Australia/Brisbane" -# ... -# - -#use_timezone=US/Mountain -#use_timezone=Australia/Brisbane - - - - -# P1.PL FILE LOCATION -# This value determines where the p1.pl perl script (used by the -# embedded Perl interpreter) is located. If you didn't compile -# Nagios with embedded Perl support, this option has no effect. - -p1_file=/usr/sbin/p1.pl - - - -# EMBEDDED PERL INTERPRETER OPTION -# This option determines whether or not the embedded Perl interpreter -# will be enabled during runtime. This option has no effect if Nagios -# has not been compiled with support for embedded Perl. -# Values: 0 = disable interpreter, 1 = enable interpreter - -enable_embedded_perl=1 - - - -# EMBEDDED PERL USAGE OPTION -# This option determines whether or not Nagios will process Perl plugins -# and scripts with the embedded Perl interpreter if the plugins/scripts -# do not explicitly indicate whether or not it is okay to do so. Read -# the HTML documentation on the embedded Perl interpreter for more -# information on how this option works. - -use_embedded_perl_implicitly=1 - - - -# ILLEGAL OBJECT NAME CHARACTERS -# This option allows you to specify illegal characters that cannot -# be used in host names, service descriptions, or names of other -# object types. - -illegal_object_name_chars=`~!$%^&*|'"<>?,()= - - - -# ILLEGAL MACRO OUTPUT CHARACTERS -# This option allows you to specify illegal characters that are -# stripped from macros before being used in notifications, event -# handlers, etc. This DOES NOT affect macros used in service or -# host check commands. -# The following macros are stripped of the characters you specify: -# $HOSTOUTPUT$ -# $HOSTPERFDATA$ -# $HOSTACKAUTHOR$ -# $HOSTACKCOMMENT$ -# $SERVICEOUTPUT$ -# $SERVICEPERFDATA$ -# $SERVICEACKAUTHOR$ -# $SERVICEACKCOMMENT$ - -illegal_macro_output_chars=`~$&|'"<> - - - -# REGULAR EXPRESSION MATCHING -# This option controls whether or not regular expression matching -# takes place in the object config files. Regular expression -# matching is used to match host, hostgroup, service, and service -# group names/descriptions in some fields of various object types. -# Values: 1 = enable regexp matching, 0 = disable regexp matching - -use_regexp_matching=0 - - - -# "TRUE" REGULAR EXPRESSION MATCHING -# This option controls whether or not "true" regular expression -# matching takes place in the object config files. This option -# only has an effect if regular expression matching is enabled -# (see above). If this option is DISABLED, regular expression -# matching only occurs if a string contains wildcard characters -# (* and ?). If the option is ENABLED, regexp matching occurs -# all the time (which can be annoying). -# Values: 1 = enable true matching, 0 = disable true matching - -use_true_regexp_matching=0 - - - -# ADMINISTRATOR EMAIL/PAGER ADDRESSES -# The email and pager address of a global administrator (likely you). -# Nagios never uses these values itself, but you can access them by -# using the $ADMINEMAIL$ and $ADMINPAGER$ macros in your notification -# commands. - -admin_email=nagios@localhost -admin_pager=pagenagios@localhost - - - -# DAEMON CORE DUMP OPTION -# This option determines whether or not Nagios is allowed to create -# a core dump when it runs as a daemon. Note that it is generally -# considered bad form to allow this, but it may be useful for -# debugging purposes. Enabling this option doesn't guarantee that -# a core file will be produced, but that's just life... -# Values: 1 - Allow core dumps -# 0 - Do not allow core dumps (default) - -daemon_dumps_core=0 - - - -# LARGE INSTALLATION TWEAKS OPTION -# This option determines whether or not Nagios will take some shortcuts -# which can save on memory and CPU usage in large Nagios installations. -# Read the documentation for more information on the benefits/tradeoffs -# of enabling this option. -# Values: 1 - Enabled tweaks -# 0 - Disable tweaks (default) - -use_large_installation_tweaks=0 - - - -# ENABLE ENVIRONMENT MACROS -# This option determines whether or not Nagios will make all standard -# macros available as environment variables when host/service checks -# and system commands (event handlers, notifications, etc.) are -# executed. Enabling this option can cause performance issues in -# large installations, as it will consume a bit more memory and (more -# importantly) consume more CPU. -# Values: 1 - Enable environment variable macros (default) -# 0 - Disable environment variable macros - -enable_environment_macros=1 - - - -# CHILD PROCESS MEMORY OPTION -# This option determines whether or not Nagios will free memory in -# child processes (processed used to execute system commands and host/ -# service checks). If you specify a value here, it will override -# program defaults. -# Value: 1 - Free memory in child processes -# 0 - Do not free memory in child processes - -#free_child_process_memory=1 - - - -# CHILD PROCESS FORKING BEHAVIOR -# This option determines how Nagios will fork child processes -# (used to execute system commands and host/service checks). Normally -# child processes are fork()ed twice, which provides a very high level -# of isolation from problems. Fork()ing once is probably enough and will -# save a great deal on CPU usage (in large installs), so you might -# want to consider using this. If you specify a value here, it will -# program defaults. -# Value: 1 - Child processes fork() twice -# 0 - Child processes fork() just once - -#child_processes_fork_twice=1 - - - -# DEBUG LEVEL -# This option determines how much (if any) debugging information will -# be written to the debug file. OR values together to log multiple -# types of information. -# Values: -# -1 = Everything -# 0 = Nothing -# 1 = Functions -# 2 = Configuration -# 4 = Process information -# 8 = Scheduled events -# 16 = Host/service checks -# 32 = Notifications -# 64 = Event broker -# 128 = External commands -# 256 = Commands -# 512 = Scheduled downtime -# 1024 = Comments -# 2048 = Macros - -debug_level=0 - - - -# DEBUG VERBOSITY -# This option determines how verbose the debug log out will be. -# Values: 0 = Brief output -# 1 = More detailed -# 2 = Very detailed - -debug_verbosity=1 - - - -# DEBUG FILE -# This option determines where Nagios should write debugging information. - -debug_file=/var/log/nagios/nagios.debug - - - -# MAX DEBUG FILE SIZE -# This option determines the maximum size (in bytes) of the debug file. If -# the file grows larger than this size, it will be renamed with a .old -# extension. If a file already exists with a .old extension it will -# automatically be deleted. This helps ensure your disk space usage doesn't -# get out of control when debugging Nagios. - -max_debug_file_size=1000000 - - From bb6903aacf9a1a7288d0940fa9e411a4b5f1f6df Mon Sep 17 00:00:00 2001 From: Ben Hocker Date: Wed, 12 Jul 2017 17:56:51 -0500 Subject: [PATCH 2/6] Switching nagios configs to variables --- manifests/server.pp | 3 +++ templates/nagios-4.cfg.erb | 6 +++--- 2 files changed, 6 insertions(+), 3 deletions(-) diff --git a/manifests/server.pp b/manifests/server.pp index 39fdee1b..fd0e0fe1 100644 --- a/manifests/server.pp +++ b/manifests/server.pp @@ -59,6 +59,9 @@ $service_perfdata_file_mode = 'a', $service_perfdata_file_processing_interval = '0', $service_perfdata_file_processing_command = false, + $enable_notifications = '0', + $enable_environment_macros = '0', + $allow_empty_hostgroup_assignment = '0', $enable_flap_detection = '1', $date_format = 'iso8601', $admin_email = 'root@localhost', diff --git a/templates/nagios-4.cfg.erb b/templates/nagios-4.cfg.erb index f209c597..19e3a350 100644 --- a/templates/nagios-4.cfg.erb +++ b/templates/nagios-4.cfg.erb @@ -791,7 +791,7 @@ accept_passive_host_checks=1 # service notifications when it is initially (re)started. # Values: 1 = enable notifications, 0 = disable notifications -enable_notifications=1 +enable_notifications=<%= @enable_notifications %> @@ -1244,7 +1244,7 @@ use_large_installation_tweaks=0 # Values: 1 - Enable environment variable macros # 0 - Disable environment variable macros (default) -enable_environment_macros=1 +enable_environment_macros=<%= @enable_environment_macros %> @@ -1330,7 +1330,7 @@ max_debug_file_size=1000000 # Should we allow hostgroups to have no hosts, we default this to off since # that was the old behavior -allow_empty_hostgroup_assignment=0 +allow_empty_hostgroup_assignment=<%= @allow_empty_hostgroup_assignment %> From 92264ef092e268d6307158b4986bdce94dd3c8a4 Mon Sep 17 00:00:00 2001 From: Ben Hocker Date: Wed, 12 Jul 2017 18:15:14 -0500 Subject: [PATCH 3/6] Change default notifications to on --- manifests/server.pp | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/manifests/server.pp b/manifests/server.pp index fd0e0fe1..9c034229 100644 --- a/manifests/server.pp +++ b/manifests/server.pp @@ -59,7 +59,7 @@ $service_perfdata_file_mode = 'a', $service_perfdata_file_processing_interval = '0', $service_perfdata_file_processing_command = false, - $enable_notifications = '0', + $enable_notifications = '1', $enable_environment_macros = '0', $allow_empty_hostgroup_assignment = '0', $enable_flap_detection = '1', From a2ed6a0b9b369263cf0879e5bbee6b86fac2687c Mon Sep 17 00:00:00 2001 From: Ben Hocker Date: Wed, 12 Jul 2017 20:09:16 -0500 Subject: [PATCH 4/6] Adding plugin commands --- manifests/check/cpu.pp | 2 ++ manifests/check/disk.pp | 2 ++ manifests/check/ram.pp | 2 ++ 3 files changed, 6 insertions(+) diff --git a/manifests/check/cpu.pp b/manifests/check/cpu.pp index 87a8e95c..ac92ffba 100644 --- a/manifests/check/cpu.pp +++ b/manifests/check/cpu.pp @@ -1,5 +1,6 @@ class nagios::check::cpu ( $ensure = undef, + $plugin_command = '/usr/lib64/nagios/plugins/check_cpu', $args = '', $check_title = $::nagios::client::host_name, $servicegroups = undef, @@ -22,6 +23,7 @@ nagios::client::nrpe_file { 'check_cpu': ensure => $ensure, + plugin => $plugin_command, args => $fullargs, } diff --git a/manifests/check/disk.pp b/manifests/check/disk.pp index 1082bba2..247215c6 100644 --- a/manifests/check/disk.pp +++ b/manifests/check/disk.pp @@ -1,5 +1,6 @@ class nagios::check::disk ( $ensure = undef, + $plugin_command = '/usr/lib64/nagios/plugins/check_disk', $args = '', # -l : Do not check network mounts, local (and checked) elsewhere # binfmt_misc : Denied by default, not useful to monitor @@ -27,6 +28,7 @@ nagios::client::nrpe_file { 'check_disk': ensure => $ensure, + plugin => $plugin_command, args => $fullargs, } diff --git a/manifests/check/ram.pp b/manifests/check/ram.pp index d860067f..e013ce84 100644 --- a/manifests/check/ram.pp +++ b/manifests/check/ram.pp @@ -1,5 +1,6 @@ class nagios::check::ram ( $ensure = undef, + $plugin_command = '/usr/lib64/nagios/plugins/check_ram', $args = '', $check_title = $::nagios::client::host_name, $servicegroups = undef, @@ -22,6 +23,7 @@ nagios::client::nrpe_file { 'check_ram': ensure => $ensure, + plugin => $plugin_command, args => $fullargs, } From 8b9050f6c0a0c2d034b18ba989ded799736dd769 Mon Sep 17 00:00:00 2001 From: Ben Hocker Date: Thu, 13 Jul 2017 22:25:52 -0500 Subject: [PATCH 5/6] Adding service display name --- manifests/service.pp | 2 ++ 1 file changed, 2 insertions(+) diff --git a/manifests/service.pp b/manifests/service.pp index dd7469f0..78f73bf8 100644 --- a/manifests/service.pp +++ b/manifests/service.pp @@ -9,6 +9,7 @@ $ensure = undef, $server = $nagios::client::server, $host_name = $nagios::client::host_name, + $service_displayname = $name, $service_description = $name, $servicegroups = undef, $check_period = $nagios::client::service_check_period, @@ -47,6 +48,7 @@ ensure => $ensure, host_name => $host_name, check_command => $check_command, + display_name => $service_displayname, service_description => $service_description, servicegroups => $servicegroups, check_period => $final_check_period, From c953875c2e9cb12b1a9b7050e7063f98a5b20832 Mon Sep 17 00:00:00 2001 From: Ben Hocker Date: Fri, 21 Jul 2017 16:37:17 -0500 Subject: [PATCH 6/6] Purge doesn't seem to be working all the time - trying this --- manifests/server.pp | 36 +++++++++++++++++++++++++----------- 1 file changed, 25 insertions(+), 11 deletions(-) diff --git a/manifests/server.pp b/manifests/server.pp index 9c034229..04228873 100644 --- a/manifests/server.pp +++ b/manifests/server.pp @@ -351,17 +351,31 @@ } # Works great, but only if the "target" is the default (known limitation) - resources { [ - 'nagios_command', - 'nagios_contact', - 'nagios_contactgroup', - 'nagios_host', - 'nagios_hostdependency', - 'nagios_hostgroup', - 'nagios_service', - 'nagios_servicegroup', - 'nagios_timeperiod', - ]: + resources {'nagios_command': + purge => true, + } + resources {'nagios_contact': + purge => true, + } + resources {'nagios_contactgroup': + purge => true, + } + resources {'nagios_host': + purge => true, + } + resources {'nagios_hostdependency': + purge => true, + } + resources {'nagios_hostgroup': + purge => true, + } + resources {'nagios_service': + purge => true, + } + resources {'nagios_servicegroup': + purge => true, + } + resources {'nagios_timeperiod': purge => true, }