Grafana Post-install

[eteixido1]

Hello tteck,

Somthing goes wrong with grafana post-install. The script seems to finish without errors but /etc/grafana/grafana.ini are comented. I tryed with alpine and debian and the problem is the same.

I uncomment port 3000 in the config file and restart the service and then Grafana starts without any problem. I don't know if I need to configure somthing more.

Kind regards,

[tteck]

I can't replicate

  / ____/________ _/ __/___ _____  ____ _
 / / __/ ___/ __  / /_/ __  / __ \/ __  /
/ /_/ / /  / /_/ / __/ /_/ / / / / /_/ / 
\____/_/   \__,_/_/  \__,_/_/ /_/\__,_/  
 
Using Advanced Settings
Using Distribution: debian
Using debian Version: 11
Using Container Type: 1
Using Root Password: Automatic Login
Container ID: 112
Using Hostname: grafana
Using Disk Size: 2
Allocated Cores: 1
Allocated RAM: 512
Using Bridge: vmbr0
Using IP Address: dhcp
Using Gateway IP Address: Default
Disable IPv6: yes
Using Interface MTU Size: Default
Using DNS Search Domain: Host
Using DNS Server IP Address: Host
Using MAC Address: AE:1A:60:07:B7:59
Using Vlan: Default
Enable Root SSH Access: no
Enable Verbose Mode: no
Creating a Grafana LXC using the above advanced settings
 ✓ Using local for Template Storage.
 ✓ Using local-lvm for Container Storage.
 ✓ Updated LXC Template List
 ✓ LXC Container 112 was successfully created.
 ✓ Started LXC Container
 ✓ Set up Container OS
 ✓ Network Connected: 192.168.86.253 
 ✓ Internet Connected
 ✓ DNS Resolved github.com to 140.82.112.4
 ✓ Updated Container OS
 ✓ Installed Dependencies
 ✓ Set up Grafana Repository
 ✓ Installed Grafana
 ✓ Customized Container
 ✓ Cleaned
 ✓ Completed Successfully!

Grafana should be reachable by going to the following URL.
         http://192.168.86.253:3000 

#################################### Server ####################################
[server]
# Protocol (http, https, h2, socket)
;protocol = http

# The ip address to bind to, empty will bind to all interfaces
;http_addr =

# The http port  to use
;http_port = 3000

# The public facing domain name used to access grafana from a browser
;domain = localhost

# Redirect to correct domain if host header does not match domain
# Prevents DNS rebinding attacks
;enforce_domain = false

# The full public facing url you use in browser, used for redirects and emails
# If you use reverse proxy and sub path specify full url (with sub path)
;root_url = %(protocol)s://%(domain)s:%(http_port)s/

[eteixido1]

I can't replicate

  / ____/________ _/ __/___ _____  ____ _
 / / __/ ___/ __  / /_/ __  / __ \/ __  /
/ /_/ / /  / /_/ / __/ /_/ / / / / /_/ / 
\____/_/   \__,_/_/  \__,_/_/ /_/\__,_/  
 
Using Advanced Settings
Using Distribution: debian
Using debian Version: 11
Using Container Type: 1
Using Root Password: Automatic Login
Container ID: 112
Using Hostname: grafana
Using Disk Size: 2
Allocated Cores: 1
Allocated RAM: 512
Using Bridge: vmbr0
Using IP Address: dhcp
Using Gateway IP Address: Default
Disable IPv6: yes
Using Interface MTU Size: Default
Using DNS Search Domain: Host
Using DNS Server IP Address: Host
Using MAC Address: AE:1A:60:07:B7:59
Using Vlan: Default
Enable Root SSH Access: no
Enable Verbose Mode: no
Creating a Grafana LXC using the above advanced settings
 ✓ Using local for Template Storage.
 ✓ Using local-lvm for Container Storage.
 ✓ Updated LXC Template List
 ✓ LXC Container 112 was successfully created.
 ✓ Started LXC Container
 ✓ Set up Container OS
 ✓ Network Connected: 192.168.86.253 
 ✓ Internet Connected
 ✓ DNS Resolved github.com to 140.82.112.4
 ✓ Updated Container OS
 ✓ Installed Dependencies
 ✓ Set up Grafana Repository
 ✓ Installed Grafana
 ✓ Customized Container
 ✓ Cleaned
 ✓ Completed Successfully!

Grafana should be reachable by going to the following URL.
         http://192.168.86.253:3000 

#################################### Server ####################################
[server]
# Protocol (http, https, h2, socket)
;protocol = http

# The ip address to bind to, empty will bind to all interfaces
;http_addr =

# The http port  to use
;http_port = 3000

# The public facing domain name used to access grafana from a browser
;domain = localhost

# Redirect to correct domain if host header does not match domain
# Prevents DNS rebinding attacks
;enforce_domain = false

# The full public facing url you use in browser, used for redirects and emails
# If you use reverse proxy and sub path specify full url (with sub path)
;root_url = %(protocol)s://%(domain)s:%(http_port)s/

Hello tteck,

With debian and alpine I've need to remove ; before the port and restart the service. Without that the url is unreachable.

Kind regards,