Changedetection script is stuck on installing font packages

[jenilpateljp]

Changedetection script is stuck on installing font packages I tried couple times but no luck

[tteck]

Not here...

   ________                              ____       __            __  _           
  / ____/ /_  ____ _____  ____ ____     / __ \___  / /____  _____/ /_(_)___  ____ 
 / /   / __ \/ __ `/ __ \/ __ `/ _ \   / / / / _ \/ __/ _ \/ ___/ __/ / __ \/ __ \
/ /___/ / / / /_/ / / / / /_/ /  __/  / /_/ /  __/ /_/  __/ /__/ /_/ / /_/ / / / /
\____/_/ /_/\__,_/_/ /_/\__, /\___/  /_____/\___/\__/\___/\___/\__/_/\____/_/ /_/ 
                       /____/                                                     
Using Advanced Settings
Using Distribution: debian
Using debian Version: 11
Using Container Type: 1
Using Root Password: Automatic Login
Container ID: 112
Using Hostname: changedetection
Using Disk Size: 8
Allocated Cores: 2
Allocated RAM: 1024
Using Bridge: vmbr0
Using IP Address: dhcp
Using Gateway IP Address: Default
Disable IPv6: yes
Using Interface MTU Size: Default
Using DNS Search Domain: Host
Using DNS Server IP Address: Host
Using MAC Address: AE:1A:60:07:B7:59
Using Vlan: Default
Enable Root SSH Access: no
Enable Verbose Mode: no
Creating a Change Detection LXC using the above advanced settings
 ✓ Using local for Template Storage.
 ✓ Using local-lvm for Container Storage.
 ✓ Updated LXC Template List
 ✓ LXC Container 112 was successfully created.
 ✓ Started LXC Container
 ✓ Set up Container OS
 ✓ Network Connected: 192.168.86.253 
 ✓ Internet Connected
 ✓ DNS Resolved github.com to 140.82.113.4
 ✓ Updated Container OS
 ✓ Installed Dependencies
 ✓ Updated Python3
 ✓ Set up Node.js Repository
 ✓ Installed Node.js
 ✓ Installed Change Detection
 ✓ Installed Browserless & Playwright
 ✓ Installed Font Packages
 ✓ Installed X11 Packages
 ✓ Created Services
 ✓ Customized Container
 ✓ Cleaned
 ✓ Completed Successfully!

Change Detection should be reachable by going to the following URL.
         http://192.168.86.253:5000 

[LilTrublMakr]

I had this happen to me as well where I let it sit for an hour and it would not get past the font packages. For giggles, I enabled verbose and when it got to that part, it wanted me to accept an EULA:

IDK if this can be circumvented but I guess if anyone sees this in the future, rerun the script in advanced mode and allow verbose.

[tteck]

I have just created three new Change Detection LXCs: two running Debian 11 and one running Debian 12 without any issues. So, if I cannot reproduce the problem on my side, I cannot address an issue that appears to be functioning correctly here.