UNMANIC

[ptichalouf]

Hello thanks for your hard your but this is possible to add unmanic with IGPU ? thanks again :)

[tteck]

Wouldn't Unmanic need to be installed on an existing LXC?

[ptichalouf]

i think that not a big deal peoples will make mount point. i make this personnaly of maybe you can add a choice before installing anything. And i think you need to add ffmpeg. i see some error on tdarr too but we could talk about that later if you want

[tteck]

And the ability to link remote installations

[tteck]

apt-get install ffmpeg

[ptichalouf]

link remote works great :)

[ptichalouf]

replied below sorry

[ptichalouf]

apt-get install ffmpeg
so with this pending list is no more empty. i try to add HW with the other script but still can't trancode

`LOG:

Input #0, matroska,webm, from '/mnt/data/media/tv/Brooklyn Nine-Nine (2013) [tvdbid-269586]/Season 02/Brooklyn Nine-Nine (2013) - S02E06 - Jake and Sophia [WEBDL-1080p][AC3 2.0][h264]-LiBERTY.mkv':

Metadata:

 title : Brooklyn.Nine-Nine.S02E06.FRENCH.1080p.WEB-DL.H264-LiBERTY

 encoder : libebml v1.3.0 + libmatroska v1.4.1

 creation_time : 2015-07-06T11:35:27.000000Z

Duration: 00:20:45.82, start: 0.000000, bitrate: 5346 kb/s

Stream #0:0(fre): Video: h264 (High), yuv420p(tv, bt709, progressive), 1920x1080 [SAR 1:1 DAR 16:9], 25 fps, 25 tbr, 1k tbn (default)

 Metadata:

   title : Brooklyn.Nine-Nine.S02E06.FRENCH.1080p.WEB-DL.H264-LiBERTY

Stream #0:1(fre): Audio: ac3, 48000 Hz, stereo, fltp, 192 kb/s (default)

 Metadata:

   title : Brooklyn.Nine-Nine.S02E06.FRENCH.1080p.WEB-DL.H264-LiBERTY

Stream mapping:

Stream #0:0 (h264) -> hwupload:default

format:default -> Stream #0:0 (hevc_qsv)

Stream #0:1 -> #0:1 (copy)

Press [q] to stop, [?] for help

[AVHWFramesContext @ 0x55cb0c811280] Failed to sync surface 0xc876110: 6 (invalid VASurfaceID).

[hwupload @ 0x55cb0c380740] Failed to upload frame: -5.

Error while filtering: Input/output error

Failed to inject frame into filter network: Input/output error

Error while processing the decoded data for stream #0:0`

[tteck]

Don't know what any of that means. 🤷🏻‍♂️

My primary focus revolves around the development of application LXCs, and I'm not specialized in providing support for operational issues that may arise with these applications.

[akmarwah03]

@ptichalouf , how were you able to solve this, I am trying with qsv and getting same error

[ptichalouf]

@akmarwah03 using docker lxc with portainer and installing unmanic via portainer with this template : https://github.com/Lissy93/portainer-templates

[tteck]

i try to add HW with the other script but still can't trancode

Privileged container?

[ptichalouf]

yes i try stuff and i will reply here if i find something

[di5cord20]

Ready for testing.

bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/misc/unmanic.sh)"

Works perfectly. Ran in Proxmox shell selecting the Tdarr LXC previously created (which was configured privileged). As @ptichalouf mentioned earlier, ideally this would be it's own LXC (similar to how Tdarr LXC script works). If that we available, I'll kill my Tdarr LXC (which is now my Unmanic LXC labelled tdarr) and start fresh.

[ptichalouf]

i will try in tdarr lxc so :)

[tteck]

New test, Its own LXC

bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/unmanic.sh)"

[ptichalouf]

but any idea why i have this error ? i58600T and /dev/dri works great anywhere else

[di5cord20]

I got the same error as @ptichalouf when running the new script bash -c "$(wget -qLO - https://github.com/tteck/Proxmox/raw/main/ct/unmanic.sh)"

[tteck]

fixed

[di5cord20]

Worked perfectly! Thanks so much for making this script.

For anyone planning to use this script, I'd suggest increasing the disk size (especially if used for encoding as you'll run out of space quickly). Similary, if you're using CPU for encoding, you'll want to increase the cores from the default (if you have them available). For reference, I'm using an N100 with 4 CPUs and have allocated them all to the container. While encoding 1 H264 to 265, my cpu maxed out at ~70%.

Lastly, there are a lot of dependencies during the install. Just be patient and let the script complete.

[ptichalouf]

Already 3 nodes with the new script i made a mount point everything is gorgeous ! Thanks again for your time and work