Installation stuck on Updating Container OS

[Tequila-dev]

Script installation process stuck on Updating Container OS and never changes. Proxmox VE 8.1.3, default settings, internet connection established. Is there a way to skip the update process and run it later, or maybe any other solution? Thanks in advance.

Logs from the shell:

Using Default Settings
Using Distribution: ubuntu
Using ubuntu Version: 22.04
Using Container Type: 0
Using Root Password: Automatic Login
Using Container ID: 105
Using Hostname: jellyfin
Using Disk Size: 8GB
Allocated Cores 2
Allocated Ram 2048
Using Bridge: vmbr0
Using Static IP Address: dhcp
Using Gateway Address: Default
Disable IPv6: No
Using Interface MTU Size: Default
Using DNS Search Domain: Host
Using DNS Server Address: Host
Using MAC Address: Default
Using VLAN Tag: Default
Enable Root SSH Access: No
Enable Verbose Mode: No
Creating a Jellyfin LXC using the above default settings
✓ Using local for Template Storage.
✓ Using local-lvm for Container Storage.
✓ Updated LXC Template List
✓ LXC Container 105 was successfully created.
✓ Started LXC Container
✓ Set up Container OS
✓ Network Connected: 10.0.0.140
✓ Internet Connected
✓ DNS Resolved github.com to 140.82.121.4

• Updating Container OS...

[tteck]

Not stuck, just slow. If there's an issue, it will show an error.

[Tequila-dev]

I left the installation process for an entire night, no errors after 8 hours.

[agenttank]

Hi!

I am stuck here too with jellyfin script... apt is finished according to /var/log/apt/history.log and no apt process is there anymore. apt isn't locked anymore too.

Using Advanced Settings
Using Distribution: ubuntu
Using ubuntu Version: 22.04
Using Container Type: 1
Using Root Password:
Container ID: 103
Using Hostname: lxc3
Using Disk Size: 8
Allocated Cores: 4
Allocated RAM: 4096
Using Bridge: vmbr0
Using IP Address: 192.168.3.103/24
Using Gateway IP Address: 192.168.3.254
Disable IPv6: yes
Using Interface MTU Size: Default
Using DNS Search Domain: Host
Using DNS Server IP Address: Host
Using Vlan: 30
Enable Root SSH Access: yes
Enable Verbose Mode: no
Creating a Jellyfin LXC using the above advanced settings
✓ Using local for Template Storage.
✓ Using local_zfs for Container Storage.
✓ Updated LXC Template List
✓ Downloaded LXC Template
✓ LXC Container 103 was successfully created.
✓ Started LXC Container
✓ Set up Container OS
✓ Network Connected: 192.168.3.103
✓ Internet Connected
✓ DNS Resolved github.com to 140.82.121.3

• Updating Container OS...

[tteck]

Hopefully, this (00f73c7) will cure those symptoms.

[agenttank]

it went over it now :) thank you!

[Tequila-dev]

Did the trick for me too, but strangely enough only with 23.04 Lunar. On 22.04 or default settings still the same issue.