Phoscon App not finding conbee II

[jddayley]

The phoscon app is not able to detect the conbee II. I can see it on the proxmox host when I run lsusb. I also see it in the lxc container when I run ls -l /dev/serial/by-id/
/dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2495756-if00 -> ../../ttyACM0

I also tried to upgrade the firmware.

root@deconz:/usr/share/deCONZ/firmware# GCFFlasher_internal -d /dev/ttyACM0 -f deCONZ_ConBeeII_0x26720700.bin.GCF -x 3
GCFFlasher V3_17 (c) dresden elektronik ingenieurtechnik gmbh
11:16:09:329 using firmware file: deCONZ_ConBeeII_0x26720700.bin.GCF
11:16:09:388 ls dev: /dev/ttyACM0 (0x0000/0x0000) sn:
11:16:09:388 ls dev: /dev/ttyS0 (0x0000/0x0000) sn:
11:16:09:388 ls dev: /dev/ttyS1 (0x0000/0x0000) sn:
11:16:09:388 device /dev/ttyACM0 not found
root@deconz:/usr/share/deCONZ/firmware#

[tteck]

Is the LXC Privileged?

[tteck]

I also see it in the lxc container when I run ls -l /dev/serial/by-id/
/dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2495756-if00 -> ../../ttyACM0

I'd say yes... lol

[tteck]

Beings that I don't own a Conbee II stick, hopefully someone with experience will chime in and help

[jddayley]

Is there a command that I could run to determine that information? Otherwise, I'm going to reinstall the script

[tteck]

Look under the LXC's options tab

[jddayley]

[schiz0phr3ne]

Did you tried to update your Conbee II with her ID (/dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2495756-if00) ?

In Zigbee2MQTT, we can use ID or logical name.

[nicedevil007]

Can you post your entire LXC config file here?
To get the conbee up and running wasn't an easy task inside a LXC but I got it working on a friends environment where I still have access to :)

Maybe I can help out.

[MrThiemann]

Hey 👋
I actually wanted to try your script too.... but I can't get my conbee2 to run.
In the HA integration it works perfectly?!

Do I need to make big changes to your /etc/pve/lxc/ID.conf?
everything I can find on the net shows me that I have to enter some values here.

if I edit the *.conf in this way, I probably get it sorted through somehow. But in decoz it still says "not connected"