Zigbee2mqtt ls /dev/serial/by-id doesn’t work

[numerobis08]

Hello I create a vm on proxmox 7.3
I'm struggling to assign the usb dongle to the vm.
I assigned it by its id to the vm.
On proxmox shell when I do the commande lsusb it's visible but when I try the command ls /dev/serial/by-id I have the follow " no such file or directory".

[tteck]

Did you create the Zigbee2Mqtt LXC privileged?

[tteck]

1 - Do you have ZHA running?
2 - Try going to IP:9442

[numerobis08]

So some update i found a feedback you gave on only post to delete coordinator_backup.json file and re-edited the configuration.yaml file and it worked but sill have on issue maybe you experienced it. I installed my MQTT broker (mosquitto) on another LXC based on Debian 11. But i looks like Zigbee2mqtt cannot connect to it ( i tried to connect to the actual one which is on a raspberry and it worked). Is there something to allow on the LXC on which i do have the MQTT broker ?

[tteck]

You can follow the instructions on this repo to get MQTT setup

[numerobis08]

I found the solution, it may help if you face that case :
I the mosquitto config file i had to add the line
“ listener 1883 0.0.0.0“
Many thanks for your support and help I’ll buy you a coffee :)

[tteck]

Thank you!