Remove baseurl usage (redis#1266)

* Remove baseurl usage

* Update README

Author: paoloredis

README.md

@@ -93,13 +93,6 @@ It's strongly advised to use `relref` because it provides the following advantag
 
 The following needs to be taken into account when using `relref`: The reference `/develop/get-started/data-store` and `/develop/get-started/data-store/` aren't the same. You must use the trailing slash if the referenced article is an `_index.md` file within a folder (e.g., `.../data-store/` for `.../data-store/_index.md`). Otherwise, you should not use the trailing slash (e.g., `.../get-started/data-store.md`).
 
-RelRefs with dots (`.`) and hashtags (`#`) in the reference name, such as `/commands/ft.create` or `/develop/data-types/timeseries/configuration#compaction_policy`, don't seem to work. Please use the `{{< baseurl >}}` as a workaround in that case. Here are a couple of examples:
-
-```
-[compaction]({{< baseurl >}}/develop/data-types/timeseries/configuration#compaction_policy)
-[FT.CREATE]({{< baseurl >}}/commands/ft.create)
-```
-
 ### Images
 
 The image shortcode doesn't need to be closed anymore. Here is an example;

content/commands/acl-setuser/index.md

@@ -131,7 +131,7 @@ This is a list of all the supported Redis ACL rules:
 * `#<hashedpassword>`: Adds the specified hashed password to the list of user passwords. A Redis hashed password is hashed with SHA256 and translated into a hexadecimal string. Example: `#c3ab8ff13720e8ad9047dd39466b3c8974e592c2fa383d4a3960714caef0c4f2`.
 * `<password`: Like `>password` but removes the password instead of adding it.
 * `!<hashedpassword>`: Like `#<hashedpassword>` but removes the password instead of adding it.
-* `(<rule list>)`: (Available in Redis 7.0 and later) Creates a new selector to match rules against. Selectors are evaluated after the user permissions, and are evaluated according to the order they are defined. If a command matches either the user permissions or any selector, it is allowed. See [selectors]({{< baseurl >}}operate/oss_and_stack/management/security/acl#selectors) for more information.
+* `(<rule list>)`: (Available in Redis 7.0 and later) Creates a new selector to match rules against. Selectors are evaluated after the user permissions, and are evaluated according to the order they are defined. If a command matches either the user permissions or any selector, it is allowed. See [selectors]({{< relref "operate/oss_and_stack/management/security/acl#selectors" >}}) for more information.
 * `clearselectors`: (Available in Redis 7.0 and later) Deletes all of the selectors attached to the user.
 * `reset`: Removes any capability from the user. They are set to off, without passwords, unable to execute any command, unable to access any key.
 

content/commands/bf.add/index.md

@@ -29,15 +29,15 @@ title: BF.ADD
 ---
 Adds an item to a Bloom filter.
 
-This command is similar to [`BF.MADD`]({{< baseurl >}}commands/bf.madd/), except that only one item can be added.
+This command is similar to [`BF.MADD`]({{< relref "commands/bf.madd/" >}}), except that only one item can be added.
 
 ## Required arguments
 
 <details open><summary><code>key</code></summary>
 
 is key name for a Bloom filter to add the item to.
 
-If `key` does not exist - a new Bloom filter is created with default error rate, capacity, and expansion (see [`BF.RESERVE`]({{< baseurl >}}commands/bf.reserve/)).
+If `key` does not exist - a new Bloom filter is created with default error rate, capacity, and expansion (see [`BF.RESERVE`]({{< relref "commands/bf.reserve/" >}})).
 </details>
 
 <details open><summary><code>item</code></summary>

content/commands/bf.exists/index.md

@@ -29,7 +29,7 @@ title: BF.EXISTS
 ---
 Determines whether a given item was added to a Bloom filter.
 
-This command is similar to [`BF.MEXISTS`]({{< baseurl >}}commands/bf.mexists/), except that only one item can be checked.
+This command is similar to [`BF.MEXISTS`]({{< relref "commands/bf.mexists/" >}}), except that only one item can be checked.
 
 ## Required arguments
 

content/commands/bf.insert/index.md

@@ -58,7 +58,7 @@ title: BF.INSERT
 ---
 Creates a new Bloom filter if the `key` does not exist using the specified error rate, capacity, and expansion, then adds all specified items to the Bloom Filter.
 
-This command is similar to [`BF.MADD`]({{< baseurl >}}commands/bf.madd/), except that the error rate, capacity, and expansion can be specified. It is a sugarcoated combination of [`BF.RESERVE`]({{< baseurl >}}commands/bf.reserve/) and [`BF.MADD`]({{< baseurl >}}commands/bf.madd/).
+This command is similar to [`BF.MADD`]({{< relref "commands/bf.madd/" >}}), except that the error rate, capacity, and expansion can be specified. It is a sugarcoated combination of [`BF.RESERVE`]({{< relref "commands/bf.reserve/" >}}) and [`BF.MADD`]({{< relref "commands/bf.madd/" >}}).
 
 ## Required arguments
 
@@ -89,14 +89,14 @@ It is an error to specify `NOCREATE` together with either `CAPACITY` or `ERROR`.
 Specifies the desired `capacity` for the filter to be created.
 This parameter is ignored if the filter already exists.
 If the filter is automatically created and this parameter is absent, then the module-level `capacity` is used.
-See [`BF.RESERVE`]({{< baseurl >}}commands/bf.reserve/) for more information about the impact of this value.
+See [`BF.RESERVE`]({{< relref "commands/bf.reserve/" >}}) for more information about the impact of this value.
 </details>
 
 <details open><summary><code>ERROR error</code></summary>
 
 Specifies the `error` ratio of the newly created filter if it does not yet exist.
 If the filter is automatically created and `error` is not specified then the module-level error rate is used.
-See [`BF.RESERVE`]({{< baseurl >}}commands/bf.reserve/) for more information about the format of this value.
+See [`BF.RESERVE`]({{< relref "commands/bf.reserve/" >}}) for more information about the format of this value.
 </details>
 
 <details open><summary><code>NONSCALING</code></summary>

content/commands/bf.loadchunk/index.md

@@ -29,9 +29,9 @@ syntax_fmt: BF.LOADCHUNK key iterator data
 syntax_str: iterator data
 title: BF.LOADCHUNK
 ---
-Restores a Bloom filter previously saved using [`BF.SCANDUMP`]({{< baseurl >}}commands/bf.scandump/).
+Restores a Bloom filter previously saved using [`BF.SCANDUMP`]({{< relref "commands/bf.scandump/" >}}).
 
-See the [`BF.SCANDUMP`]({{< baseurl >}}commands/bf.scandump/) command for example usage.
+See the [`BF.SCANDUMP`]({{< relref "commands/bf.scandump/" >}}) command for example usage.
 
 <note><b>Notes</b>
 
@@ -49,12 +49,12 @@ is key name for a Bloom filter to restore.
 
 <details open><summary><code>iterator</code></summary>
 
-Iterator value associated with `data` (returned by [`BF.SCANDUMP`]({{< baseurl >}}commands/bf.scandump/))
+Iterator value associated with `data` (returned by [`BF.SCANDUMP`]({{< relref "commands/bf.scandump/" >}}))
 </details>
 
 <details open><summary><code>data</code></summary>
 
-Current data chunk (returned by [`BF.SCANDUMP`]({{< baseurl >}}commands/bf.scandump/))
+Current data chunk (returned by [`BF.SCANDUMP`]({{< relref "commands/bf.scandump/" >}}))
 </details>
 
 ## Return value
@@ -66,4 +66,4 @@ Returns one of these replies:
 
 ## Examples
 
-See [`BF.SCANDUMP`]({{< baseurl >}}commands/bf.scandump/) for an example.
+See [`BF.SCANDUMP`]({{< relref "commands/bf.scandump/" >}}) for an example.

content/commands/bf.madd/index.md

@@ -33,17 +33,17 @@ title: BF.MADD
 ---
 Adds one or more items to a Bloom filter.
 
-This command is similar to [`BF.ADD`]({{< baseurl >}}commands/bf.add/), except that you can add more than one item.
+This command is similar to [`BF.ADD`]({{< relref "commands/bf.add/" >}}), except that you can add more than one item.
 
-This command is similar to [`BF.INSERT`]({{< baseurl >}}commands/bf.insert/), except that the error rate, capacity, and expansion cannot be specified.
+This command is similar to [`BF.INSERT`]({{< relref "commands/bf.insert/" >}}), except that the error rate, capacity, and expansion cannot be specified.
 
 ## Required arguments
 
 <details open><summary><code>key</code></summary>
 
 is key name for a Bloom filter to add the items to.
 
-If `key` does not exist - a new Bloom filter is created with default error rate, capacity, and expansion (see [`BF.RESERVE`]({{< baseurl >}}commands/bf.reserve/)).
+If `key` does not exist - a new Bloom filter is created with default error rate, capacity, and expansion (see [`BF.RESERVE`]({{< relref "commands/bf.reserve/" >}})).
 </details>
 
 <details open><summary><code>item...</code></summary>

content/commands/bf.mexists/index.md

@@ -31,7 +31,7 @@ title: BF.MEXISTS
 ---
 Determines whether one or more items were added to a Bloom filter.
 
-This command is similar to [`BF.EXISTS`]({{< baseurl >}}commands/bf.exists/), except that more than one item can be checked.
+This command is similar to [`BF.EXISTS`]({{< relref "commands/bf.exists/" >}}), except that more than one item can be checked.
 
 ## Required arguments
 

content/commands/bf.scandump/index.md

@@ -55,7 +55,7 @@ Returns one of these replies:
 
   The Iterator is passed as input to the next invocation of `BF.SCANDUMP`. If _Iterator_ is 0, then it means iteration has completed.
 
-  The iterator-data pair should also be passed to [`BF.LOADCHUNK`]({{< baseurl >}}commands/bf.loadchunk/) when restoring the filter.
+  The iterator-data pair should also be passed to [`BF.LOADCHUNK`]({{< relref "commands/bf.loadchunk/" >}}) when restoring the filter.
 
 - [] on error (invalid arguments, key not found, wrong key type, etc.)
 

content/commands/cf.add/index.md

@@ -30,7 +30,7 @@ title: CF.ADD
 Adds an item to the cuckoo filter.
 
 Cuckoo filters can contain the same item multiple times, and consider each addition as separate.
-Use [`CF.ADDNX`]({{< baseurl >}}commands/cf.addnx/) to add an item only if it does not exist.
+Use [`CF.ADDNX`]({{< relref "commands/cf.addnx/" >}}) to add an item only if it does not exist.
 
 ## Required arguments