Port selection on iTach is broken

[mountainjoe9]

I've setup the integration with an iTach IP2IR (POE) unit end everything works but the unit only transmits on port 1, no matter the value I enter in the Port setting.

[zehnm]

Did you use auto-discovery or manually add the iTach device?
Please provide the logs of the integration. Either while it's starting up (after the Remote is restarted) and logging its configuration, or when (re-)adding the iTach device in the setup.

Also provide the integration logs while testing an IR command with different IR output ports, as shown below. With that information it should be easy to pin point your issue.

no matter the value I enter in the Port setting.

Do you mean the infrared output port in an IR-remote entity, when using the iTach IR output?

Each detected iTach IR output port is exposed as an IR

Example using the POWER_TOGGLE command

Log output:

• first on iTach port 1:3. This will use sendir,1:3:

  ucapi:msg [::ffff:192.168.16.148:53826] -> {"kind":"req","id":16,"msg":"entity_command","msg_data":{"cmd_id":"send_ir","entity_id":"GlobalCache_###:IR","entity_type":"ir_emitter","params":{"code":"0000 0073 0021 0000 ...","port":"1:3"}}} +2m
  gclib:debug Queueing new request 1 (pos: 0): sendir,1:3,2 +5m
  gclib:msg <- sendir,1:3,2,36045,1,1,95,31,15,15,15,15,15,31,15,31,47,31,15,15,15,15,15,15,15,15,15,15,15,15,15,15,15,15,15,15,15,15,31,15,15,15,15,15,15,31,15,15,15,15,15,15,15,15,31,31,15,15,15,15,15,15,15,15,31,15,15,31,15,15,31,3004 +6m
  gclib:debug queue processing stopped (paused=false, active=0, unprocessed=0, items=1) +1ms
  ucapi:msg [::ffff:172.16.16.148:53826] <-  {"kind":"resp","req_id":16,"code":200,"msg":"result","msg_data":{}} +45ms
  gclib:msg -> completeir,1:3,2 +165ms
  gclib:debug Removing item index: 0 (queue length: 1) +165ms
  gclib:debug Resolved request 1 from: completeir,1:3,2 +0ms

• then the same command on port 1:1. This will use sendir,1:1:

  ucapi:msg [::ffff:192.168.16.148:53826] -> {"kind":"req","id":17,"msg":"entity_command","msg_data":{"cmd_id":"send_ir","entity_id":"GlobalCache_###:IR","entity_type":"ir_emitter","params":{"code":"0000 0073 0021 0000 ...","port":"1:1"}}} +19s
  gclib:debug Queueing new request 2 (pos: 0): sendir,1:1,3 +19s
  gclib:msg <- sendir,1:1,3,36045,1,1,95,31,15,15,15,15,15,31,15,31,47,31,15,15,15,15,15,15,15,15,15,15,15,15,15,15,15,15,15,15,15,15,31,15,15,15,15,15,15,15,15,31,15,15,15,15,15,15,31,31,15,15,15,15,15,15,15,15,31,15,15,31,15,15,31,3004 +19s
  gclib:debug queue processing stopped (paused=false, active=0, unprocessed=0, items=1) +1ms
  ucapi:msg [::ffff:192.168.16.148:53826] <-  {"kind":"resp","req_id":17,"code":200,"msg":"result","msg_data":{}} +2ms
  gclib:msg -> completeir,1:1,3 +169ms
  gclib:debug Removing item index: 0 (queue length: 1) +168ms
  gclib:debug Resolved request 2 from: completeir,1:1,3 +0ms

Selecting a different output port will also cause the corresponding output LED on the iTach device to flash.