boards: arm: Configure jlink flash runner on nxp boards

MaureenHelm · Anas Nashif · commit d41fe91e654f · 2018-01-29T23:15:16.000-05:00
Now that the jlink runner supports the flash command, set
BOARD_FLASH_RUNNER when the OpenSDA or LPCLink debug adapter is
programmed with jlink firmware.

Signed-off-by: Maureen Helm &lt;maureen.helm@nxp.com&gt;
diff --git a/boards/arm/frdm_k64f/board.cmake b/boards/arm/frdm_k64f/board.cmake
@@ -2,6 +2,7 @@ set_ifndef(OPENSDA_FW daplink)
 
 if(OPENSDA_FW STREQUAL jlink)
   set_ifndef(BOARD_DEBUG_RUNNER jlink)
+  set_ifndef(BOARD_FLASH_RUNNER jlink)
 elseif(OPENSDA_FW STREQUAL daplink)
   set_ifndef(BOARD_DEBUG_RUNNER pyocd)
   set_ifndef(BOARD_FLASH_RUNNER pyocd)
diff --git a/boards/arm/frdm_kl25z/board.cmake b/boards/arm/frdm_kl25z/board.cmake
@@ -2,6 +2,7 @@ set_ifndef(OPENSDA_FW daplink)
 
 if(OPENSDA_FW STREQUAL jlink)
   set_ifndef(BOARD_DEBUG_RUNNER jlink)
+  set_ifndef(BOARD_FLASH_RUNNER jlink)
 elseif(OPENSDA_FW STREQUAL daplink)
   set_ifndef(BOARD_DEBUG_RUNNER pyocd)
   set_ifndef(BOARD_FLASH_RUNNER pyocd)
diff --git a/boards/arm/frdm_kw41z/board.cmake b/boards/arm/frdm_kw41z/board.cmake
@@ -2,6 +2,7 @@ set_ifndef(OPENSDA_FW jlink)
 
 if(OPENSDA_FW STREQUAL jlink)
   set_ifndef(BOARD_DEBUG_RUNNER jlink)
+  set_ifndef(BOARD_FLASH_RUNNER jlink)
 elseif(OPENSDA_FW STREQUAL daplink)
   set_ifndef(BOARD_DEBUG_RUNNER pyocd)
   set_ifndef(BOARD_FLASH_RUNNER pyocd)
diff --git a/boards/arm/hexiwear_k64/board.cmake b/boards/arm/hexiwear_k64/board.cmake
@@ -2,6 +2,7 @@ set_ifndef(OPENSDA_FW daplink)
 
 if(OPENSDA_FW STREQUAL jlink)
   set_ifndef(BOARD_DEBUG_RUNNER jlink)
+  set_ifndef(BOARD_FLASH_RUNNER jlink)
 elseif(OPENSDA_FW STREQUAL daplink)
   set_ifndef(BOARD_DEBUG_RUNNER pyocd)
   set_ifndef(BOARD_FLASH_RUNNER pyocd)
diff --git a/boards/arm/hexiwear_kw40z/board.cmake b/boards/arm/hexiwear_kw40z/board.cmake
@@ -2,6 +2,7 @@ set_ifndef(OPENSDA_FW jlink)
 
 if(OPENSDA_FW STREQUAL jlink)
   set_ifndef(BOARD_DEBUG_RUNNER jlink)
+  set_ifndef(BOARD_FLASH_RUNNER jlink)
 elseif(OPENSDA_FW STREQUAL daplink)
   set_ifndef(BOARD_DEBUG_RUNNER pyocd)
   set_ifndef(BOARD_FLASH_RUNNER pyocd)
diff --git a/boards/arm/lpcxpresso54114/board.cmake b/boards/arm/lpcxpresso54114/board.cmake
@@ -8,6 +8,7 @@ set_ifndef(LPCLINK_FW jlink)
 
 if(LPCLINK_FW STREQUAL jlink)
   set_ifndef(BOARD_DEBUG_RUNNER jlink)
+  set_ifndef(BOARD_FLASH_RUNNER jlink)
 endif()
 
 board_runner_args(jlink "--device=LPC54114J256_M4")
