align to current esp-idf

#44

Thanks to Fredrik Fornstad

Author: lws-team

README.md

@@ -65,9 +65,9 @@ While in factory / OTA mode, the LED flashes dows a PWM sine cycle at about 1Hz.
 
 ## Building and using
 
-1) This was built and tested against esp-idf at 4b91c82cc447640e5b61407e810f1d6f3eabd233
-from Jun 20, 2018.  You can force esp-idf to that commit by cloning / pulling / fetching
-the latest esp-idf and then doing `git reset --hard 4b91c82cc447640e5b61407e810f1d6f3eabd233`
+1) This was built and tested against esp-idf at 17ac4bad7381e579e5a7775755cc25480da47d97
+from Sept 11, 2018.  You can force esp-idf to that commit by cloning / pulling / fetching
+the latest esp-idf and then doing `git reset --hard 17ac4bad7381e579e5a7775755cc25480da47d97`
 in the esp-idf directory.
 
 Esp-idf is in constant flux you may be able to use the latest without problems but if not,

components/libwebsockets

@@ -118,6 +118,9 @@ CONFIG_AWS_IOT_SDK=
 # Bluetooth
 #
 CONFIG_BT_ENABLED=
+CONFIG_BTDM_CONTROLLER_BLE_MAX_CONN_EFF=0
+CONFIG_BTDM_CONTROLLER_BR_EDR_MAX_ACL_CONN_EFF=0
+CONFIG_BTDM_CONTROLLER_BR_EDR_MAX_SYNC_CONN_EFF=0
 CONFIG_BTDM_CONTROLLER_PINNED_TO_CORE=0
 CONFIG_BT_RESERVE_DRAM=0
 
@@ -132,10 +135,12 @@ CONFIG_ADC_FORCE_XPD_FSM=
 CONFIG_ADC2_DISABLE_DAC=y
 
 #
-# SPI master configuration
+# SPI configuration
 #
 CONFIG_SPI_MASTER_IN_IRAM=
 CONFIG_SPI_MASTER_ISR_IN_IRAM=y
+CONFIG_SPI_SLAVE_IN_IRAM=
+CONFIG_SPI_SLAVE_ISR_IN_IRAM=y
 
 #
 # ESP32-specific
@@ -199,12 +204,15 @@ CONFIG_BROWNOUT_DET_LVL_SEL_5=
 CONFIG_BROWNOUT_DET_LVL_SEL_6=
 CONFIG_BROWNOUT_DET_LVL_SEL_7=y
 CONFIG_BROWNOUT_DET_LVL=7
+CONFIG_REDUCE_PHY_TX_POWER=y
 CONFIG_ESP32_TIME_SYSCALL_USE_RTC_FRC1=y
 CONFIG_ESP32_TIME_SYSCALL_USE_RTC=
 CONFIG_ESP32_TIME_SYSCALL_USE_FRC1=
 CONFIG_ESP32_TIME_SYSCALL_USE_NONE=
 CONFIG_ESP32_RTC_CLOCK_SOURCE_INTERNAL_RC=y
 CONFIG_ESP32_RTC_CLOCK_SOURCE_EXTERNAL_CRYSTAL=
+CONFIG_ESP32_RTC_CLOCK_SOURCE_EXTERNAL_OSC=
+CONFIG_ESP32_RTC_CLOCK_SOURCE_INTERNAL_8MD256=
 CONFIG_ESP32_RTC_CLK_CAL_CYCLES=1024
 CONFIG_ESP32_DEEP_SLEEP_WAKEUP_DELAY=0
 CONFIG_ESP32_XTAL_FREQ_40=
@@ -270,7 +278,9 @@ CONFIG_ESP_HTTP_CLIENT_ENABLE_HTTPS=
 CONFIG_DMA_RX_BUF_NUM=10
 CONFIG_DMA_TX_BUF_NUM=10
 CONFIG_EMAC_L2_TO_L3_RX_BUF_MODE=
+CONFIG_EMAC_CHECK_LINK_PERIOD_MS=2000
 CONFIG_EMAC_TASK_PRIORITY=20
+CONFIG_EMAC_TASK_STACK_SIZE=3072
 
 #
 # FAT Filesystem support
@@ -345,6 +355,12 @@ CONFIG_HEAP_POISONING_COMPREHENSIVE=
 CONFIG_HEAP_TRACING=y
 CONFIG_HEAP_TRACING_STACK_DEPTH=2
 
+#
+# HTTP Server
+#
+CONFIG_HTTPD_MAX_REQ_HDR_LEN=512
+CONFIG_HTTPD_MAX_URI_LEN=512
+
 #
 # libsodium
 #
@@ -510,6 +526,11 @@ CONFIG_MBEDTLS_ECP_DP_BP512R1_ENABLED=
 CONFIG_MBEDTLS_ECP_DP_CURVE25519_ENABLED=y
 CONFIG_MBEDTLS_ECP_NIST_OPTIM=y
 
+#
+# mDNS
+#
+CONFIG_MDNS_MAX_SERVICES=10
+
 #
 # OpenSSL
 #
@@ -565,14 +586,16 @@ CONFIG_SPIFFS_CHECK_DBG=
 CONFIG_SPIFFS_TEST_VISUALISATION=
 
 #
-# tcpip adapter
+# TCP/IP Adapter
 #
 CONFIG_IP_LOST_TIMER_INTERVAL=120
+CONFIG_TCPIP_LWIP=y
 
 #
 # Virtual file system
 #
 CONFIG_SUPPRESS_SELECT_DEBUG_OUTPUT=
+CONFIG_SUPPORT_TERMIOS=y
 
 #
 # Wear Levelling