Skip to content

Commit 5f607a9

Browse files
kilograhamkilograham
authored
Comment out CMake cyw43 vars which aren't really that useful in general i don't think (raspberrypi#2090)
1 parent a6ae2e6 commit 5f607a9

File tree

1 file changed

+41
-41
lines changed

1 file changed

+41
-41
lines changed

‎src/rp2_common/pico_cyw43_driver/CMakeLists.txt‎

Lines changed: 41 additions & 41 deletions
Original file line numberDiff line numberDiff line change
@@ -55,47 +55,47 @@ if (EXISTS ${PICO_CYW43_DRIVER_PATH}/${CYW43_DRIVER_TEST_FILE})
5555
hardware_dma
5656
hardware_exception
5757
)
58-
59-
if (CYW43_PIN_WL_DYNAMIC)
60-
# PICO_CMAKE_CONFIG: CYW43_PIN_WL_DYNAMIC, flag to indicate if cyw43 SPI pins can be changed at runtime, type=bool, group=pico_cyw43_driver
61-
target_compile_definitions(cyw43_driver_picow INTERFACE CYW43_PIN_WL_DYNAMIC=${CYW43_PIN_WL_DYNAMIC})
62-
endif()
63-
if (CYW43_DEFAULT_PIN_WL_REG_ON)
64-
# PICO_CMAKE_CONFIG: CYW43_DEFAULT_PIN_WL_REG_ON, gpio pin to power up the cyw43 chip, type=int, group=pico_cyw43_driver
65-
target_compile_definitions(cyw43_driver_picow INTERFACE CYW43_DEFAULT_PIN_WL_REG_ON=${CYW43_DEFAULT_PIN_WL_REG_ON})
66-
endif()
67-
if (CYW43_DEFAULT_PIN_WL_DATA_OUT)
68-
# PICO_CMAKE_CONFIG: CYW43_DEFAULT_PIN_WL_DATA_OUT, gpio pin for spi data out to the cyw43 chip, type=int, group=pico_cyw43_driver
69-
target_compile_definitions(cyw43_driver_picow INTERFACE CYW43_DEFAULT_PIN_WL_DATA_OUT=${CYW43_DEFAULT_PIN_WL_DATA_OUT})
70-
endif()
71-
if (CYW43_DEFAULT_PIN_WL_DATA_IN)
72-
# PICO_CMAKE_CONFIG: CYW43_DEFAULT_PIN_WL_DATA_IN, gpio pin for spi data in from the cyw43 chip, type=int, group=pico_cyw43_driver
73-
target_compile_definitions(cyw43_driver_picow INTERFACE CYW43_DEFAULT_PIN_WL_DATA_IN=${CYW43_DEFAULT_PIN_WL_DATA_IN})
74-
endif()
75-
if (CYW43_DEFAULT_PIN_WL_HOST_WAKE)
76-
# PICO_CMAKE_CONFIG: CYW43_DEFAULT_PIN_WL_HOST_WAKE, gpio (irq) pin for the irq line from the cyw43 chip, type=int, group=pico_cyw43_driver
77-
target_compile_definitions(cyw43_driver_picow INTERFACE CYW43_DEFAULT_PIN_WL_HOST_WAKE=${CYW43_DEFAULT_PIN_WL_HOST_WAKE})
78-
endif()
79-
if (CYW43_DEFAULT_PIN_WL_CLOCK)
80-
# PICO_CMAKE_CONFIG: CYW43_DEFAULT_PIN_WL_CLOCK, gpio pin for the spi clock line to the cyw43 chip, type=int, group=pico_cyw43_driver
81-
target_compile_definitions(cyw43_driver_picow INTERFACE CYW43_DEFAULT_PIN_WL_CLOCK=${CYW43_DEFAULT_PIN_WL_CLOCK})
82-
endif()
83-
if (CYW43_DEFAULT_PIN_WL_CS)
84-
# PICO_CMAKE_CONFIG: CYW43_DEFAULT_PIN_WL_CS, gpio pin for the spi chip select to the cyw43 chip, type=int, group=pico_cyw43_driver
85-
target_compile_definitions(cyw43_driver_picow INTERFACE CYW43_DEFAULT_PIN_WL_CS=${CYW43_DEFAULT_PIN_WL_CS})
86-
endif()
87-
if (CYW43_PIO_CLOCK_DIV_INT)
88-
# PICO_CMAKE_CONFIG: CYW43_PIO_CLOCK_DIV_INT, integer component of pio clock divider used for cyw43 comms, type=int, default=2, group=pico_cyw43_driver
89-
target_compile_definitions(cyw43_driver_picow INTERFACE CYW43_PIO_CLOCK_DIV_INT=${CYW43_PIO_CLOCK_DIV_INT})
90-
endif()
91-
if (CYW43_PIO_CLOCK_DIV_FRAC8)
92-
# PICO_CMAKE_CONFIG: CYW43_PIO_CLOCK_DIV_FRAC8, fractional component of pio clock divider used for cyw43 comms in range 0-255, type=int, default=0, group=pico_cyw43_driver
93-
target_compile_definitions(cyw43_driver_picow INTERFACE CYW43_PIO_CLOCK_DIV_FRAC8=${CYW43_PIO_CLOCK_DIV_FRAC8})
94-
endif()
95-
if (CYW43_PIO_CLOCK_DIV_DYNAMIC)
96-
# PICO_CMAKE_CONFIG: CYW43_PIO_CLOCK_DIV_DYNAMIC, flag used to enable dynamic pio clock divider API, type=bool, default=0, group=pico_cyw43_driver
97-
target_compile_definitions(cyw43_driver_picow INTERFACE CYW43_PIO_CLOCK_DIV_DYNAMIC=${CYW43_PIO_CLOCK_DIV_DYNAMIC})
98-
endif()
58+
# commented out as I don't think there is a major use case for these to be settable from CMake command line vs board header, or target_compile_defitions
59+
# if (CYW43_PIN_WL_DYNAMIC)
60+
# # PICO_CMAKE_CONFIG: CYW43_PIN_WL_DYNAMIC, flag to indicate if cyw43 SPI pins can be changed at runtime, type=bool, group=pico_cyw43_driver
61+
# target_compile_definitions(cyw43_driver_picow INTERFACE CYW43_PIN_WL_DYNAMIC=${CYW43_PIN_WL_DYNAMIC})
62+
# endif()
63+
# if (CYW43_DEFAULT_PIN_WL_REG_ON)
64+
# # PICO_CMAKE_CONFIG: CYW43_DEFAULT_PIN_WL_REG_ON, gpio pin to power up the cyw43 chip, type=int, group=pico_cyw43_driver
65+
# target_compile_definitions(cyw43_driver_picow INTERFACE CYW43_DEFAULT_PIN_WL_REG_ON=${CYW43_DEFAULT_PIN_WL_REG_ON})
66+
# endif()
67+
# if (CYW43_DEFAULT_PIN_WL_DATA_OUT)
68+
# # PICO_CMAKE_CONFIG: CYW43_DEFAULT_PIN_WL_DATA_OUT, gpio pin for spi data out to the cyw43 chip, type=int, group=pico_cyw43_driver
69+
# target_compile_definitions(cyw43_driver_picow INTERFACE CYW43_DEFAULT_PIN_WL_DATA_OUT=${CYW43_DEFAULT_PIN_WL_DATA_OUT})
70+
# endif()
71+
# if (CYW43_DEFAULT_PIN_WL_DATA_IN)
72+
# # PICO_CMAKE_CONFIG: CYW43_DEFAULT_PIN_WL_DATA_IN, gpio pin for spi data in from the cyw43 chip, type=int, group=pico_cyw43_driver
73+
# target_compile_definitions(cyw43_driver_picow INTERFACE CYW43_DEFAULT_PIN_WL_DATA_IN=${CYW43_DEFAULT_PIN_WL_DATA_IN})
74+
# endif()
75+
# if (CYW43_DEFAULT_PIN_WL_HOST_WAKE)
76+
# # PICO_CMAKE_CONFIG: CYW43_DEFAULT_PIN_WL_HOST_WAKE, gpio (irq) pin for the irq line from the cyw43 chip, type=int, group=pico_cyw43_driver
77+
# target_compile_definitions(cyw43_driver_picow INTERFACE CYW43_DEFAULT_PIN_WL_HOST_WAKE=${CYW43_DEFAULT_PIN_WL_HOST_WAKE})
78+
# endif()
79+
# if (CYW43_DEFAULT_PIN_WL_CLOCK)
80+
# # PICO_CMAKE_CONFIG: CYW43_DEFAULT_PIN_WL_CLOCK, gpio pin for the spi clock line to the cyw43 chip, type=int, group=pico_cyw43_driver
81+
# target_compile_definitions(cyw43_driver_picow INTERFACE CYW43_DEFAULT_PIN_WL_CLOCK=${CYW43_DEFAULT_PIN_WL_CLOCK})
82+
# endif()
83+
# if (CYW43_DEFAULT_PIN_WL_CS)
84+
# # PICO_CMAKE_CONFIG: CYW43_DEFAULT_PIN_WL_CS, gpio pin for the spi chip select to the cyw43 chip, type=int, group=pico_cyw43_driver
85+
# target_compile_definitions(cyw43_driver_picow INTERFACE CYW43_DEFAULT_PIN_WL_CS=${CYW43_DEFAULT_PIN_WL_CS})
86+
# endif()
87+
# if (CYW43_PIO_CLOCK_DIV_INT)
88+
# # PICO_CMAKE_CONFIG: CYW43_PIO_CLOCK_DIV_INT, integer component of pio clock divider used for cyw43 comms, type=int, default=2, group=pico_cyw43_driver
89+
# target_compile_definitions(cyw43_driver_picow INTERFACE CYW43_PIO_CLOCK_DIV_INT=${CYW43_PIO_CLOCK_DIV_INT})
90+
# endif()
91+
# if (CYW43_PIO_CLOCK_DIV_FRAC8)
92+
# # PICO_CMAKE_CONFIG: CYW43_PIO_CLOCK_DIV_FRAC8, fractional component of pio clock divider used for cyw43 comms in range 0-255, type=int, default=0, group=pico_cyw43_driver
93+
# target_compile_definitions(cyw43_driver_picow INTERFACE CYW43_PIO_CLOCK_DIV_FRAC8=${CYW43_PIO_CLOCK_DIV_FRAC8})
94+
# endif()
95+
# if (CYW43_PIO_CLOCK_DIV_DYNAMIC)
96+
# # PICO_CMAKE_CONFIG: CYW43_PIO_CLOCK_DIV_DYNAMIC, flag used to enable dynamic pio clock divider API, type=bool, default=0, group=pico_cyw43_driver
97+
# target_compile_definitions(cyw43_driver_picow INTERFACE CYW43_PIO_CLOCK_DIV_DYNAMIC=${CYW43_PIO_CLOCK_DIV_DYNAMIC})
98+
# endif()
9999

100100
# Note: This is used by MP, so check for issues when making changes
101101
# e.g. Don't add new depenedences

0 commit comments

Comments
 (0)