BME280 SENSOR
| What | Comments | |
|---|---|---|
| Identifier | BME280 | |
| Interface | I2C | |
| Provides | temperature | celsius degrees |
| humidity | % relative humidity | |
| pressure | hPa | |
| Properties | none | |
| Datasheet |  |
-- Setup BME280, attached at I2C0, sda=GPIO14, SCL=GPIO26
-- BME280 adress is 0x76
s1 = sensor.setup("BME280", i2c.I2C0, 400, 14, 26, 0x76)
-- Read temperature
temperature = s1:read("temperature")
-- Read humidity
humidity = s1:read("humidity")
-- Read preassure
pressure = s1:read("pressure")Lua RTOS is free for you, but funds are required to make this possible. Feel free to donate as little or as much as you wish. Every donation is very much appreciated.
