SERVO module
This module contains functions to control RC servo motors.
A servo is a rotary actuator, and typically consists of a small electric motor, driving a train of reduction gears, controlled by a control circuit. Historically servos have ben used for radio control and small-scale robotics.
Radio control servos are connected through a standard three-wire connection:
- power: typically the red wire, that must be connected to a +5V power supply.
- ground: typically the black or brown wire, that must be connected to the board's and power's supply ground.
- signal: typically the yellow, orange or white wire, that must be connected to a board's GPIO.
Lua RTOS is free for you, but funds are required to make this possible. Feel free to donate as little or as much as you wish. Every donation is very much appreciated.
