diff --git a/wolfBoot/Makefile b/wolfBoot/Makefile
index 157e05e5..1f7c791c 100644
--- a/wolfBoot/Makefile
+++ b/wolfBoot/Makefile
@@ -23,7 +23,8 @@ APPENDIX= appendix01.md \
 		  appendix10.md \
 		  appendix11.md \
 		  appendix12.md \
-		  appendix13.md
+		  appendix13.md \
+		  appendix14.md
 
 ifeq ($(DOC_LANG),JA)
     PDF  = wolfBoot-Manual-jp.pdf
diff --git a/wolfBoot/mkdocs.yml b/wolfBoot/mkdocs.yml
index 7abc9cad..2f8ad3dd 100644
--- a/wolfBoot/mkdocs.yml
+++ b/wolfBoot/mkdocs.yml
@@ -25,6 +25,7 @@ nav:
     - "K. wolfBoot Key Tools": appendix11.md
     - "L. wolfCrypt in TrustZone-M secure domain": appendix12.md
     - "M. wolfBoot TPM support": appendix13.md
+    - "N. wolfBoot Configuration Options": appendix14.md
 theme:
   name: null
   custom_dir: ../mkdocs-material/material
diff --git a/wolfBoot/src/appendix14.md b/wolfBoot/src/appendix14.md
new file mode 100644
index 00000000..9e461329
--- /dev/null
+++ b/wolfBoot/src/appendix14.md
@@ -0,0 +1,167 @@
+# wolfBoot Configuration Options
+
+This section shows parameters by running `make config`.
+
+- `ARCH`: Architecture of the target to be used.
+    - Default: ARM
+    - Possible: x86_64/AARCH64/ARM/RNESAS_RX/RISCV/PPC/ARM_BE
+
+- `HASH`: Selection of hash algorithm to be used.
+    - Default: SHA256
+    - Possible: SHA3/SHA256/SHA384
+
+- `MCUXSDK`: Enable when using NXP's MCUXpresso SDK.
+    - Default: 1
+
+- `MCUXPRESSO`: Setting for MCUXpresso IDE environment.
+    - Default: /mnt/c/Users/(User)/(Project)/wolfboot-2.4.0/mcux-sdk
+
+- `MCUXPRESSO_CPU`: CPU-specific settings for MCUXpresso.
+    - Default: MK64FN1M0VLL12
+
+- `MCUXPRESSO_DRIVERS`: Enable driver support for MCUXpresso.
+    - Default: /mnt/c/Users/(User)/(Project)/wolfboot-2.4.0/mcux-sdk/devices/MK64F12
+
+- `MCUXPRESSO_CMSIS`: Enable CMSIS (Cortex Microcontroller Software Interface Standard) library.
+    - Default: /mnt/c/Users/(User)/(Project)/wolfboot-2.4.0/CMSIS_5/CMSIS
+
+- `FREEDOM_E_SDK`: Enable when using SiFive Freedom-E SDK (for RISC-V).
+    - Default: /home/(User)/src/freedom-e-sdk
+
+- `STM32CUBE`: Enable STM32Cube HAL (for STM32).
+    - Default: /home/(User)/STM32Cube/Repository/STM32Cube_FW_WB_V1.3.0
+
+- `CYPRESS_PDL`: Enable Cypress Peripheral Driver Library (PDL).
+    - Default: /home/(User)/src/psoc6pdl
+
+- `CYPRESS_CORE_LIB`: Enable Cypress core library.
+    - Default: /home/(User)/src/cypress-core-lib
+
+- `CYPRESS_TARGET_LIB`: Enable Cypress target-specific library.
+    - Default: /home/(User)/src/TARGET_CY8CKIT-062S2-43012
+
+- `CORTEX_M7`: Enable when targeting ARM Cortex-M7.
+    - Default: 0
+
+- `CORTEX_M33`: Enable when targeting ARM Cortex-M33.
+    - Default: 0
+
+- `NO_ASM`: Disable assembly optimizations and implement in C language only.
+    - Default: 0
+
+- `NO_XIP`: Disable XIP (Execute in Place) (do not execute code directly from flash memory).
+    - Default: 0
+
+- `WOLFBOOT_VERSION`: Option to specify the version of wolfBoot.
+    - Default is set in include/wolfboot/version.h
+
+- `V`: Enable Verbose build.
+    - Default: 0
+
+- `NO_MPU`: Disable Memory Protection Unit (MPU).
+    - Default: 0
+
+- `SPMATH`: Enable SP Math library (single-precision math library).
+    - Default: 1
+
+- `SPMATHALL`: Enable all SP Math functions.
+    - Default: 0
+
+- `IMAGE_HEADER_SIZE`: Specify the firmware image header size.
+    - Default: 256
+
+- `PKA`: Enable public key cryptography processing (Public Key Accelerator).
+    - Default: 1
+
+- `TZEN`: Enable TrustZone security features.
+    - Default: 0
+
+- `PSOC6_CRYPTO`: Use Cypress PSoC 6 series hardware cryptographic engine.
+    - Default: 1
+
+- `WOLFBOOT_TPM_VERIFY`: Enable firmware verification using TPM (Trusted Platform Module).
+    - Default: 0
+
+- `WOLFBOOT_TPM_SEAL`: Enable function to seal data using TPM.
+    - Default: 0
+
+- `WOLFBOOT_TPM_KEYSTORE`: Enable key storage using TPM.
+    - Default: 0
+
+- `WOLFCRYPT_TZ`: Enable the use of wolfCrypt in TrustZone.
+    - Default: 0
+
+- `WOLFCRYPT_TZ_PKCS11`: Enable PKCS#11 interface in TrustZone.
+    - Default: 0
+
+- `WOLFBOOT_LOAD_ADDRESS`: Specify the load address for wolfBoot.
+    - Default: 0x200000
+
+- `WOLFBOOT_LOAD_DTS_ADDRESS`: Specify the load address for Device Tree Storage (DTS).
+    - Default: 0x400000
+
+- `WOLFBOOT_DTS_BOOT_ADDRESS`: Specify the device tree address during boot.
+    - Default: 0x30000
+
+- `WOLFBOOT_DTS_UPDATE_ADDRESS`: Specify the device tree address for updates.
+    - Default: 0x50000
+
+- `DELTA_BLOCK_SIZE`: Specify the block size for delta updates.
+    - Default: 256
+
+- `WOLFBOOT_HUGE_STACK`: Option to increase stack size.
+    - Default: 0
+
+- `FORCE_32BIT`: Option to force build as a 32-bit system.
+    - Default: 0
+
+- `ENCRYPT_WITH_CHACHA`: Enable firmware encryption using the ChaCha algorithm.
+    - Default: 0
+
+- `ARMORED`: Enable additional mitigations against fault-injection attacks, e.g. voltage and clock glitches, or EMFI.
+    - Default: 0
+
+- `LMS_LEVELS`: Specify the levels for LMS (Leighton-Micali Signature) hash-based signatures.
+    - Default: 0
+
+- `LMS_HEIGHT`: Specify the hash tree height for LMS signatures.
+    - Default: 0
+
+- `LMS_WINTERNITZ`: Set the Winternitz coefficient (LMS signature parameter).
+    - Default: 0
+
+- `WOLFBOOT_UNIVERSAL_KEYSTORE`: Enable storing public keys of different types in the same keystore.
+    - Default: 0
+
+- `XMSS_PARAMS`: Specify parameters for XMSS (eXtended Merkle Signature Scheme).
+    - Default: XMSS-SHA2_10_256
+    - Possible: XMSS-SHA2_10_256
+
+- `ELF`: Enable support for ELF format.
+    - Default: 0
+
+- `BIG_ENDIAN`: Support big-endian architecture.
+    - Default: 0
+
+- `NXP_CUSTOM_DCD`: Enable custom DCD (Device Configuration Data) settings for NXP platforms.
+    - Default: 0
+
+- `NXP_CUSTOM_DCD_OBJS`: Enable custom DCD objects for NXP.
+
+- `FLASH_OTP_KEYSTORE`: Enable flash key storage using OTP (One-Time Programmable) memory.
+    - Default: 0
+
+- `KEYVAULT_OBJ_SIZE`: Specify the size of objects stored in KeyVault.
+
+- `KEYVAULT_MAX_ITEMS`: Specify the maximum number of items that can be stored in KeyVault.
+
+- `NO_ARM_ASM`: Disable ARM assembly code and implement in C language only.
+    - Default: 0
+
+- `SIGN_SECONDARY`: Enable a second signature for the images. Used to implement hybrid mode (e.g. ECC + ML_DSA). Set to the secondary algorithm selected for hybrid (classic + PQC) authentication.
+
+- `WOLFHSM_CLIENT`: Enable wolfHSM client (HSM).
+    - Default: 0
+
+- `WOLFHSM_CLIENT_LOCAL_KEYS`: Option for wolfHSM client to use local keys.
+    - Default: 0
diff --git a/wolfBoot/src/chapter02.md b/wolfBoot/src/chapter02.md
index 5437da2c..3f3557f6 100644
--- a/wolfBoot/src/chapter02.md
+++ b/wolfBoot/src/chapter02.md
@@ -18,6 +18,8 @@ Once a .config file is in place, it will change the default compile-time options
 
 .config can be modified with a text editor to alter the default options later on.
 
+Detailed parameters can be found at [Appendix. N](appendix14.md)
+
 ## Platform selection
 
 If supported natively, the target platform can be specified using the `TARGET` variable. Make will automatically select the correct compile option, and include the corresponding HAL for the selected target.