Skip to content

Commit f0b3400

Browse files
dgarskedanielinux
dgarske
authored and
danielinux
committed
Documentation for T1024 DDR4 registers.
1 parent bf55ac1 commit f0b3400

File tree

1 file changed

+205
-11
lines changed

1 file changed

+205
-11
lines changed

‎hal/nxp_t1024.c‎

Lines changed: 205 additions & 11 deletions
Original file line numberDiff line numberDiff line change
@@ -610,48 +610,240 @@ enum ifc_amask_sizes {
610610

611611
/* DDR4 - 2GB */
612612
/* 1600 MT/s (64-bit, CL=12, ECC on) */
613+
614+
/* SA[0-15]: 0000: Starting address for chip select (bank)n
615+
* EA[16-31]: 007F: Ending address for chip select (bank)n
616+
*/
613617
#define DDR_CS0_BNDS_VAL 0x0000007F
614618
#define DDR_CS1_BNDS_VAL 0x008000BF
615619
#define DDR_CS2_BNDS_VAL 0x0100013F
616620
#define DDR_CS3_BNDS_VAL 0x0140017F
617-
#define DDR_CS0_CONFIG_VAL 0x80010312
621+
622+
/* 15=row bits, 10 column bits, 1 bank group bit, 2 logical bank bits, ODT only during writes */
623+
/* CS_EN [0]: 1 Chip select n enable
624+
* AP_EN [8]: 1 Chip select nauto-precharge enable
625+
* ODT_RD_CFG [9-11]: ODT for reads configuration
626+
* ODT_WR_CFG [13-15]: ODT for writes configuration
627+
* BA_BITS_CS [16-17]: Number of bank bits for SDRAM on chip selectn
628+
* ROW_BITS_CS[21-23]: Number of row bits for SDRAM on chip selectn
629+
* BG_BITS_CS [26-27]: Number of bank group bits for SDRAM on chip selectn
630+
* COL_BITS_CS[29-31]: Number of column bits for SDRAM on chip selectn
631+
*/
632+
#define DDR_CS0_CONFIG_VAL 0x80810312 /* was 0x80010312 */
618633
#define DDR_CS1_CONFIG_VAL 0x00000202
619634
#define DDR_CS2_CONFIG_VAL 0x00000202
620635
#define DDR_CS3_CONFIG_VAL 0x00010202
636+
637+
/* PASR_DEC[0]: Partial array decoding
638+
* PASR_CFG[5-7]: Partial array self refresh config
639+
*/
621640
#define DDR_CS_CONFIG_2_VAL 0x00000000
622641

642+
/* RWT [0-1]: 10: 2 clocks: Read-to-write turnaround (tRTW)
643+
* WRT [2-3]: 00: 0 clocks: Write-to-read turnaround
644+
* RRT [4-5]: 00: 0 clocks: Read-to-read turnaround
645+
* WWT [6-7]: 00: 0 clocks: Write-to-write turnaround
646+
* ACT_PD_EXIT [8-11]: 0101: 5 clocks: Active powerdown exit timing (tXP)
647+
* PRE_PD_EXIT [12-15]: 0100: 4 clocks: Precharge powerdown exit timing (tXP)
648+
* EXT_PRE_PD_EXIT[16-17]: 01: 16 clocks: Extended precharge powerdown exit timing (tXP)
649+
* MRS_CYC [27-31]: 01100: 12 clocks: Mode register set cycle time (tMRD, tMOD)
650+
*/
623651
#define DDR_TIMING_CFG_0_VAL 0x8055000C
624-
#define DDR_TIMING_CFG_1_VAL 0x2E268E44
625-
#define DDR_TIMING_CFG_2_VAL 0x0049111C
626-
#define DDR_TIMING_CFG_3_VAL 0x114C1000
627652

628-
#define DDR_TIMING_CFG_4_VAL 0x00220001
653+
/* PRETOACT [0-3]: 0011: 3 clocks: Precharge-to-activate interval (tRP)
654+
* ACTTOPRE [4-7]: 1110: 14 clocks (30 total): Activate to precharge interval (tRAS)
655+
* ACTTORW [8-11]: 0010: 2 clocks (18 total): Activate to read/write interval for SDRAM (tRCD)
656+
* CASLAT [12-14]: 011: 4 clocks: MCAS_B latency from READ command
657+
* REFREC [16-19]: 1100: 12 clocks (240+12+8 total): Refresh recovery time (tRFC)
658+
* WRREC [20-23]: 1110: 14 clocks: Last data to precharge minimum interval (tWR)
659+
* ACTTOACT [24-27]: 0100: 4 clocks: Activate-to-activate interval (tRRD)
660+
* WRTORD [28-31]: 0100: 4 clocks: Last write data pair to read command issue interval (tWTR)
661+
*/
662+
#define DDR_TIMING_CFG_1_VAL 0x3E26CE44 /* was 0x2E268E44 */
663+
664+
/* ADD_LAT [0-3]: 0000: 0 clocks Additive latency
665+
* WR_LAT [9-12]: 1001: 9 clocks Write latency
666+
* EXT_WR_LAT [13]: 0: 0 clocks Extended Write Latency (1=16 clocks)
667+
* RD_TO_PRE [15-18]: 1000: 8 clocks Read to precharge (tRTP).
668+
* WR_DATA_DELAY [19-22]: 1000: 1 clock delay Write command to write data strobe timing adjustment.
669+
* CKE_PLS [23-25]: 100: 4 clocks Minimum CKE pulse width (tCKE).
670+
* FOUR_ACT [26-31]: 011100: 28 Window for four activates (tFAW).
671+
*/
672+
#define DDR_TIMING_CFG_2_VAL 0x0049111C /* tried 0x00491124 */
673+
674+
/* EXT_PRETOACT [3]: 1: 16 clocks: Extended precharge-to-activate interval (0=0, 1=16 clocks)
675+
* EXT_ACTTOPRE [6-7]: 01: 16 clocks: Extended Activate to precharge interval (tRAS)
676+
* EXT_ACTTORW [9]: 1: 16 clocks: Extended activate to read/write interval for SDRAM (tRCD) (ACTTORW[5])
677+
* EXT_REFREC [10-15]: 001111: 240 Extended refresh recovery time (tRFC).
678+
* EXT_CASLAT [18-19]: 01: 8 clocks Extended MCAS_B latency from READ command
679+
* EXT_ADD_LAT [21]: 0: 0 clocks Extended Additive Latency
680+
* EXT_WRREC [23]: 1: 16 clocks Extended last data to precharge minimum interval (tWR)
681+
* CNTL_ADJ [29-31]: 000: MODTn, MCSn_B, and MCKEn will be launched aligned with the other DRAM address and control signals.
682+
*/
683+
#define DDR_TIMING_CFG_3_VAL 0x114F1100 /* was 0x114C1000 */
684+
685+
/* RWT [0-3]: 0000: 0 clocks: Read-to-write turnaround for same chip select.
686+
* WRT [4-7]: 0000: 0 clocks: Write-to-read turnaround for same chip select
687+
* RRT [8-11]: 0010: 2 clocks: Read-to-read turnaround for same chip select
688+
* WWT [12-15]: 0010: 2 clocks: Write-to-write turnaround for same chip select.
689+
* EXT_RWT [16-17]: 00: Extended read-to-write turnaround (tRTW)
690+
* EXT_WRT [19]: 0: Extended write-to-read turnaround
691+
* EXT_RRT [21]: 0: Extended read-to-read turnaround
692+
* EXT_WWT [23]: 0: Extended write-to-write turnaround
693+
* EXT_REFINT [27]: 0: Refresh interval (0=0,1=65,536 clocks)
694+
* DLL_LOCK [30-31]: 10: 1024 clocks: DDR SDRAM DLL Lock Time (0=200, 1=512, 2=1024 clocks)
695+
*/
696+
#define DDR_TIMING_CFG_4_VAL 0x00220002 /* was 0x00220001 */
697+
698+
/* RODT_ON [3-7]: 0101: 4 clocks: Read to ODT on (0=CASLAT-WR_LAT, 1=0, 2=1, 12=11 clocks)
699+
* RODT_OFF [9-11]: 100: 4 clocks: Read to ODT off (0=4, 1=1, 7=7 clocks)
700+
* WODT_ON [15-19]: 00001: 1 clock: Write to ODT off (1=0, 2=1, 6=5 clocks)
701+
* WODT_OFF [21-23]: 100: 4 clocks: Write to ODT off (0=4, 1=1, 7=7 clocks)
702+
*/
629703
#define DDR_TIMING_CFG_5_VAL 0x05401400
704+
705+
#define DDR_TIMING_CFG_6_VAL 0x00000000
706+
707+
/* CKE_RST [2-3]: 00: 200 clocks: CKE reset time (tXPR) (0=200, 1=256, 2=512, 3=1024 clocks)
708+
* CKSRE [4-7]: 0000: 15 clocks: Valid clock after Self Refresh entry (tCKSRE) (0=15, 1=6, )
709+
* CKSRX [8-11]: 0000: 15 clocks: Valid clock after Self Refresh exit (tCKSRX)
710+
* PAR_LAT [12-15]: 0000: 0 clocks
711+
* CS_TO_CMD [24-27]: 0000: 0 clocks: Chip select to command latency
712+
*/
713+
#define DDR_TIMING_CFG_7_VAL 0x00000000 /* tried 0x00050000 */
714+
715+
/* RWT_BG [0-3]: 0000: Read-to-write turnaround for same chip select and same bank group
716+
* WRT_BG [4-7]: 0011: Write-to-read turnaround for same chip select and same bank group
717+
* RRT_BG [8-11]: 0001: Read-to-read turnaround for same chip select and same bank group
718+
* WWT_BG [12-15]: 0001: Write-to-write turnaround for same chip select and same bank group
719+
* ACTTOACT_BG [16-19]: 0101: Activate-to-activate interval for the same bank group(tRRD_L).
720+
* WRTORD_BG [20-23]: 1000: Last write data pair to read command issue interval for the same bank group(tWTR_L)
721+
* PRE_ALL_REC [27-31]: 00000: Precharge all-to-activate interval
722+
*/
630723
#define DDR_TIMING_CFG_8_VAL 0x03115800
631724

725+
/* MR1 | MR0
726+
* MR0 0x0215
727+
* | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
728+
* [ WR/RTP ] [ CL3-1 ][BT][CL0][ BL ]
729+
* Burst Length (BL) = 01: 00 (fixed 8), 01 (on the fly), 02 (fixed 4)
730+
* Burst Type (BT) = 0 (nibble sequential), 1 (interleave)
731+
* CAS Latency (CL):
732+
* 00000 (9 clocks)
733+
* 00001 (10 clocks)
734+
* 00010 (11 clocks)
735+
* 00011 (12 clocks) (original)
736+
* 00100 (13 clocks)
737+
* 00101 (14 clocks)
738+
* 00110 (15 clocks)
739+
* 00111 (16 clocks)
740+
* 10111 (32 clocks)
741+
* WRITE recovery (WR)/READ-to-PRECHARGE(RTP):
742+
* 0000 (10/5 clocks)
743+
* 0001 (12/6 clocks) (original)
744+
* 0010 (14/7 clocks)
745+
* 0011 (16/8 clocks)
746+
* 0100 (18/9 clocks)
747+
* 0101 (20/10 clocks)
748+
* 0110 (24/12 clocks)
749+
* 0111 (22/11 clocks)
750+
* 1000 (26/13 clocks)
751+
* 1001 (28/14 clocks)
752+
*
753+
* MR1 0x0101
754+
* | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
755+
* [TDQS][ RTT_NOM ][Wlev] [ AL ][ ODI ][DLL]
756+
* DLL=1, RTT_NOM=001 (RZQ/4 60ohm), ODI=00 (RZQ/7 34ohm)
757+
*/
632758
#define DDR_SDRAM_MODE_VAL 0x01010215
759+
760+
/* MR2 | MR3
761+
* MR2
762+
* | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
763+
* [ RTT_WR ] [ CWL ]
764+
*
765+
* MR3
766+
* | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
767+
* [ WR_CMD_LAT]
768+
*/
633769
#define DDR_SDRAM_MODE_2_VAL 0x00000000
634-
#define DDR_SDRAM_MODE_9_VAL 0x00000500 /* Extended SDRAM mode 5 */
635-
#define DDR_SDRAM_MODE_10_VAL 0x04000000 /* Extended SDRAM mode 7 */
770+
771+
/* Not applicable (reuse other MRs) */
636772
#define DDR_SDRAM_MODE_3_8_VAL 0x00000000
773+
774+
/* MR4 | MR5
775+
* MR4: 0x0100
776+
* MR5: 0x013F: RTT_PARK=000 disabled, CA Parity Latency=010 (5 clocks) */
777+
#define DDR_SDRAM_MODE_9_VAL 0x00000500
778+
779+
/* MR6 | MR7:
780+
* MR7: CCD_L 010=6 clocks, VREF Range 1 */
781+
#define DDR_SDRAM_MODE_10_VAL 0x04000000
782+
637783
#define DDR_SDRAM_MD_CNTL_VAL 0x03001000
638784

639785
#define DDR_SDRAM_CFG_VAL 0xE5200000 /* DDR4 w/ECC */
786+
787+
/* ODT_CFG [9-10]: 10: Assert ODT to internal IOs only
788+
* NUM_PR [16-19]: 00001: 1 refresh
789+
* OBC_CFG [25]: 1: On-the-fly Burst Chop mode will be used
790+
* D_INIT [27]: 1: The memory controller will initialize memory once it is enabled
791+
*/
640792
#define DDR_SDRAM_CFG_2_VAL 0x00401050
641793

642-
#define DDR_SDRAM_INTERVAL_VAL 0x18600618
794+
/* REF_MODE[22-23]: Refresh Mode */
795+
#define DDR_SDRAM_CFG_3_VAL 0x00000000
796+
797+
/* REFINT [0-15]: 6240: Refresh interval 12480=0x30C0
798+
* BSTOPRE [18-31]: 1560: Precharge interval
799+
*/
800+
#define DDR_SDRAM_INTERVAL_VAL 0x18600000 /* was 0x18600618 */
801+
643802
#define DDR_DATA_INIT_VAL 0xDEADBEEF
644-
#define DDR_SDRAM_CLK_CNTL_VAL 0x02400000
803+
804+
/* CLK_ADJUST[5-9]: applied cycle after address/command
805+
* 00000 = aligned
806+
* 00001 = 1/16
807+
* 00100 = 1/4
808+
* 00110 = 3/8
809+
* 01001 = 9/16
810+
* 01000 = 1/2 (configured)
811+
* 01010 = 5/8
812+
* 10000 = 1
813+
*/
814+
#define DDR_SDRAM_CLK_CNTL_VAL 0x02000000 /* was 0x02400000 */
815+
816+
/* ZQ_EN */
645817
#define DDR_ZQ_CNTL_VAL 0x8A090705
646818

819+
/* WRLVL_EN [0]: 1: Write Leveling Enable
820+
* WRLVL_MRD [5-7]: 110 0x6: 64 clocks
821+
* WRLVL_ODTEN[9-11]: 111 0x7: 128 clocks ODT delay after margining mode is programmed (tWL_ODTEN).
822+
* WRLVL_DQSEN[13-15]: 101 0x5: 32 clocks DQS/DQS_B delay after margining mode is programmed (tWL_DQSEN).
823+
* WRLVL_SMPL [16-19]: 1111 0xF: 15 clocks Write leveling sample time
824+
* WRLVL_WLR [21-23]: 110 0x6: 64 clocks Write leveling repetition time.
825+
* WRLVL_START[27-31]: 1000 0x8: 3/4 clocks Write leveling start time for DQS[0].
826+
*/
647827
#define DDR_WRLVL_CNTL_VAL 0x8675F606
828+
/* WRLVL_START_1 [3-7]: 3/4 Write leveling start time for DQS[1]
829+
* WRLVL_START_2[11-15]: 7/8 Write leveling start time for DQS[2]
830+
* WRLVL_START_3[19-23]: 7/8 Write leveling start time for DQS[3]
831+
* WRLVL_START_4[27-31]: 9/8 Write leveling start time for DQS[4]
832+
*/
648833
#define DDR_WRLVL_CNTL_2_VAL 0x06070709
834+
/* WRLVL_START_5 [3-7]: 9/8 Write leveling start time for DQS[5]
835+
* WRLVL_START_6[11-15]: 9/8 Write leveling start time for DQS[6]
836+
* WRLVL_START_7[19-23]: 9/8 Write leveling start time for DQS[7]
837+
* WRLVL_START_8[27-31]: 1 Write leveling start time for DQS[8]
838+
*/
649839
#define DDR_WRLVL_CNTL_3_VAL 0x09090908
650840

651841
#define DDR_SDRAM_RCW_1_VAL 0x00000000
652842
#define DDR_SDRAM_RCW_2_VAL 0x00000000
653843

654-
#define DDR_DDRCDR_1_VAL 0x80080000
844+
845+
/* DHC_EN[0]=1, ODT[12-13]=120 Ohms, VREF_OVRD 37% */
846+
#define DDR_DDRCDR_1_VAL 0x80000000 /* was 0x80080000 */
655847
#define DDR_DDRCDR_2_VAL 0x00000000
656848

657849
#define DDR_ERR_INT_EN_VAL 0x0000001D
@@ -1153,10 +1345,12 @@ static void hal_ddr_init(void)
11531345
set32(DDR_TIMING_CFG_2, DDR_TIMING_CFG_2_VAL);
11541346
set32(DDR_TIMING_CFG_4, DDR_TIMING_CFG_4_VAL);
11551347
set32(DDR_TIMING_CFG_5, DDR_TIMING_CFG_5_VAL);
1348+
set32(DDR_TIMING_CFG_6, DDR_TIMING_CFG_6_VAL);
1349+
set32(DDR_TIMING_CFG_7, DDR_TIMING_CFG_7_VAL);
11561350
set32(DDR_TIMING_CFG_8, DDR_TIMING_CFG_8_VAL);
11571351

11581352
set32(DDR_ZQ_CNTL, DDR_ZQ_CNTL_VAL);
1159-
set32(DDR_SDRAM_CFG_3, 0);
1353+
set32(DDR_SDRAM_CFG_3, DDR_SDRAM_CFG_3_VAL);
11601354

11611355
/* DDR SDRAM mode configuration */
11621356
set32(DDR_SDRAM_MODE, DDR_SDRAM_MODE_VAL);

0 commit comments

Comments
 (0)