driver: serial/uart: npcx: disable rx interrupt at init

In the application, after the sysjump, the RX interrupt might remain
enabled. During initialization, once the IRQ is enabled, the RX
interrupt could be triggered if there is any traffic on the RX line,
potentially causing an interrupt storm.

This change disables the UART RX interrupt at the driver initialization
to prevent this issue from occurring.

Signed-off-by: Jun Lin <[email protected]>

Author: ChiHuaL

drivers/serial/uart_npcx.c

@@ -1066,6 +1066,9 @@ static int uart_npcx_init(const struct device *dev)
 	/* Disable all UART tx FIFO interrupts */
 	uart_npcx_dis_all_tx_interrupts(dev);
 
+	/* Disable rx FIFO not empty interrupt */
+	uart_npcx_irq_rx_disable(dev);
+
 	/* Clear UART rx FIFO */
 	uart_npcx_clear_rx_fifo(dev);