No Signals

[beaconIOT]

Hey- thanks for this awesome library. I am having trouble getting it going on an arduino Mega, using a Futaba TX/RX setup. I have a 2N3904/10k/4.7k TTL inverter. The one thing that is curious is that the sbus.getDecoderErrorFrames() value keeps climbing when the Rx is connected and sbus.getDecoderErrorFrames() stops counting the instant I disconnect the Rx.

So it's definitely seeing the receiver, but for some reason all channels are showing as -100 and 100% of data is being lost.

With Rx Connected:

Ch1 -100 Data loss on connection: 100% Frames: 0 / 0 / 74470
Ch1 -100 Data loss on connection: 100% Frames: 0 / 0 / 74470
Ch1 -100 Data loss on connection: 100% Frames: 0 / 0 / 74477
Ch1 -100 Data loss on connection: 100% Frames: 0 / 0 / 74486
Ch1 -100 Data loss on connection: 100% Frames: 0 / 0 / 74486
Ch1 -100 Data loss on connection: 100% Frames: 0 / 0 / 74498
Ch1 -100 Data loss on connection: 100% Frames: 0 / 0 / 74503
Ch1 -100 Data loss on connection: 100% Frames: 0 / 0 / 74503
Ch1 -100 Data loss on connection: 100% Frames: 0 / 0 / 74518
Ch1 -100 Data loss on connection: 100% Frames: 0 / 0 / 74518
Ch1 -100 Data loss on connection: 100% Frames: 0 / 0 / 74518
Ch1 -100 Data loss on connection: 100% Frames: 0 / 0 / 74533
Ch1 -100 Data loss on connection: 100% Frames: 0 / 0 / 74533
Ch1 -100 Data loss on connection: 100% Frames: 0 / 0 / 74533
Ch1 -100 Data loss on connection: 100% Frames: 0 / 0 / 74545
Ch1 -100 Data loss on connection: 100% Frames: 0 / 0 / 74545
Ch1 -100 Data loss on connection: 100% Frames: 0 / 0 / 74550
Ch1 -100 Data loss on connection: 100% Frames: 0 / 0 / 74557
Ch1 -100 Data loss on connection: 100% Frames: 0 / 0 / 74557
Ch1 -100 Data loss on connection: 100% Frames: 0 / 0 / 74567
Ch1 -100 Data loss on connection: 100% Frames: 0 / 0 / 74570
Ch1 -100 Data loss on connection: 100% Frames: 0 / 0 / 74570
Ch1 -100 Data loss on connection: 100% Frames: 0 / 0 / 74585
Ch1 -100 Data loss on connection: 100% Frames: 0 / 0 / 74585
Ch1 -100 Data loss on connection: 100% Frames: 0 / 0 / 74585
Ch1 -100 Data loss on connection: 100% Frames: 0 / 0 / 74599
Ch1 -100 Data loss on connection: 100% Frames: 0 / 0 / 74599
Ch1 -100 Data loss on connection: 100% Frames: 0 / 0 / 74599
Ch1 -100 Data loss on connection: 100% Frames: 0 / 0 / 74613
Ch1 -100 Data loss on connection: 100% Frames: 0 / 0 / 74613
Ch1 -100 Data loss on connection: 100% Frames: 0 / 0 / 74616
Ch1 -100 Data loss on connection: 100% Frames: 0 / 0 / 74627
Ch1 -100 Data loss on connection: 100% Frames: 0 / 0 / 74627
Ch1 -100 Data loss on connection: 100% Frames: 0 / 0 / 74634
Ch1 -100 Data loss on connection: 100% Frames: 0 / 0 / 74640
Ch1 -100 Data loss on connection: 100% Frames: 0 / 0 / 74640
Ch1 -100 Data loss on connection: 100% Frames: 0 / 0 / 74649

With Rx Disconnected:

Ch1 -100 Data loss on connection: 100% Frames: 0 / 0 / 73503
Ch1 -100 Data loss on connection: 100% Frames: 0 / 0 / 73503
Ch1 -100 Data loss on connection: 100% Frames: 0 / 0 / 73503
Ch1 -100 Data loss on connection: 100% Frames: 0 / 0 / 73503
Ch1 -100 Data loss on connection: 100% Frames: 0 / 0 / 73503
Ch1 -100 Data loss on connection: 100% Frames: 0 / 0 / 73503
Ch1 -100 Data loss on connection: 100% Frames: 0 / 0 / 73503
Ch1 -100 Data loss on connection: 100% Frames: 0 / 0 / 73503
Ch1 -100 Data loss on connection: 100% Frames: 0 / 0 / 73503
Ch1 -100 Data loss on connection: 100% Frames: 0 / 0 / 73503
Ch1 -100 Data loss on connection: 100% Frames: 0 / 0 / 73503
Ch1 -100 Data loss on connection: 100% Frames: 0 / 0 / 73503
Ch1 -100 Data loss on connection: 100% Frames: 0 / 0 / 73503
Ch1 -100 Data loss on connection: 100% Frames: 0 / 0 / 73503
Ch1 -100 Data loss on connection: 100% Frames: 0 / 0 / 73503
Ch1 -100 Data loss on connection: 100% Frames: 0 / 0 / 73503
Ch1 -100 Data loss on connection: 100% Frames: 0 / 0 / 73503
Ch1 -100 Data loss on connection: 100% Frames: 0 / 0 / 73503
Ch1 -100 Data loss on connection: 100% Frames: 0 / 0 / 73503
Ch1 -100 Data loss on connection: 100% Frames: 0 / 0 / 73503

[zendes]

I'm sorry, I haven't worked on this library in about 5 years and I don't have the equipment anymore to test stuff. You're unfortunately on your own here...