boards: st: stm32h7s78_dk: Add PLL2 configuration and SDMMC1 node

Configure SDMMC1 with 4-bit bus width and card detection. Use PLL2S
as kernel peripheral clock (150MHz) divided by 15 to achieve 10MHz
SDMMC clock with clk-div = <13>.

Signed-off-by: Shan Pen <[email protected]>

Author: bricle

boards/st/stm32h7s78_dk/Kconfig.defconfig

@@ -31,4 +31,11 @@ config STM32_LTDC_FB_USE_SHARED_MULTI_HEAP
 	default y
 endif # DISPLAY
 
+if DISK_DRIVER_SDMMC
+
+config SDMMC_STM32_CLOCK_CHECK
+	default n
+
+endif # DISK_DRIVER_SDMMC
+
 endif # BOARD_STM32H7S78_DK

boards/st/stm32h7s78_dk/stm32h7s78_dk.dts

@@ -109,6 +109,18 @@
 	status = "okay";
 };
 
+&pll2 {
+	div-m = <2>;
+	mul-n = <50>;
+	div-p = <2>;
+	div-q = <2>;
+	div-r = <2>;
+	div-s = <4>;
+	div-t = <2>;
+	clocks = <&clk_hse>;
+	status = "okay";
+};
+
 &pll3 {
 	div-m = <12>;
 	mul-n = <25>;
@@ -351,3 +363,15 @@ zephyr_udc0: &usb2 {};
 	def-back-color-green = <0xFF>;
 	def-back-color-blue = <0xFF>;
 };
+
+&sdmmc1 {
+	pinctrl-0 = <&sdmmc1_d0_pc8 &sdmmc1_d1_pc9
+		     &sdmmc1_d2_pc10 &sdmmc1_d3_pc11
+		     &sdmmc1_ck_pc12 &sdmmc1_cmd_pd2>;
+	pinctrl-names = "default";
+	clk-div = <13>;
+	bus-width = <4>;
+	cd-gpios = <&gpiom 14 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>;
+	disk-name = "SD";
+	status = "okay";
+};