boards: vmu_rt1170: Update dts to reflect the second IMU being ICM42686

Additionally, remove overlay from sensor-shell sample, which is
redundant.

Signed-off-by: Luis Ubieda <[email protected]>

Author: ubieda

boards/nxp/vmu_rt1170/vmu_rt1170_mimxrt1176_cm7.dts

@@ -243,35 +243,37 @@
 	};
 };
 
-#include <zephyr/dt-bindings/sensor/icm42688.h>
+#include <zephyr/dt-bindings/sensor/icm42686.h>
 
 &lpspi1 {
 	status = "okay";
 	cs-gpios =<&gpio2 11 GPIO_ACTIVE_LOW>;
 
-	icm42688_0: icm42688p0@0 {
-		compatible = "invensense,icm42688", "invensense,icm4268x";
+	icm42686_0: icm42686p0@0 {
+		compatible = "invensense,icm42686", "invensense,icm4268x";
 		reg = <0>;
 		int-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
 		spi-max-frequency = <24000000>;
-		accel-pwr-mode = <ICM42688_DT_ACCEL_LN>;
-		accel-odr = <ICM42688_DT_ACCEL_ODR_1000>;
-		accel-fs = <ICM42688_DT_ACCEL_FS_16>;
-		gyro-pwr-mode = <ICM42688_DT_GYRO_LN>;
-		gyro-odr = <ICM42688_DT_GYRO_ODR_1000>;
-		gyro-fs = <ICM42688_DT_GYRO_FS_2000>;
+		accel-pwr-mode = <ICM42686_DT_ACCEL_LN>;
+		accel-odr = <ICM42686_DT_ACCEL_ODR_1000>;
+		accel-fs = <ICM42686_DT_ACCEL_FS_16>;
+		gyro-pwr-mode = <ICM42686_DT_GYRO_LN>;
+		gyro-odr = <ICM42686_DT_GYRO_ODR_1000>;
+		gyro-fs = <ICM42686_DT_GYRO_FS_2000>;
 		axis-align-x = <SENSOR_AXIS_ALIGN_DT_Y>;
 		axis-align-y = <SENSOR_AXIS_ALIGN_DT_X>;
 		axis-align-z = <SENSOR_AXIS_ALIGN_DT_Z>;
 		fifo-hires;
 	};
 };
 
+#include <zephyr/dt-bindings/sensor/icm42688.h>
+
 &lpspi2 {
 	status = "okay";
 	cs-gpios =<&gpio3 24 GPIO_ACTIVE_LOW>;
 
-	icm42688_1: icm42688p1@0 {
+	icm42688_0: icm42688p0@0 {
 		compatible = "invensense,icm42688", "invensense,icm4268x";
 		reg = <0>;
 		int-gpios = <&gpio2 7 GPIO_ACTIVE_HIGH>;

samples/sensor/sensor_shell/boards/vmu_rt1170_mimxrt1176_cm7.overlay

@@ -27,7 +27,7 @@ static struct sensor_stream_trigger stream_trigger = {
 };
 
 static struct sensor_read_config stream_config = {
-	.sensor = DEVICE_DT_GET(DT_NODELABEL(icm42688_1)),
+	.sensor = DEVICE_DT_GET(DT_NODELABEL(icm42688_0)),
 	.is_streaming = true,
 	.triggers = &stream_trigger,
 	.count = 0,