boards: em_starterkit: fix the board default config

Change TICKS_PER_SEC from 1000 to 100
* em_starterkit is a FPGA board with cores running at max 30 Mhz.
  1000 ticks per second is a little heavy for it.
* the tests/kernel/common requires 200 ticks per second at most,
  or the testcase will stall.

disable the generation of bin file.
* there is no flash in em_starterkit
* there is huge gap between ICCM and DCCM which will cause the bin
  file too large, alomst 2GB

Signed-off-by: Wayne Ren <[email protected]>

Author: Wayne Ren

boards/arc/em_starterkit/em_starterkit_defconfig

@@ -2,8 +2,9 @@ CONFIG_ARC=y
 CONFIG_SOC_EM9D=y
 CONFIG_BOARD_EM_STARTERKIT=y
 CONFIG_BOARD_EM_STARTERKIT_R23=y
-CONFIG_SYS_CLOCK_TICKS_PER_SEC=1000
+CONFIG_SYS_CLOCK_TICKS_PER_SEC=100
 CONFIG_XIP=n
+CONFIG_BUILD_OUTPUT_BIN=n
 CONFIG_PRINTK=y
 CONFIG_CPU_ARCEM4=y
 CONFIG_CPU_ARCV2=y

boards/arc/em_starterkit/em_starterkit_em11d_defconfig

@@ -2,8 +2,9 @@ CONFIG_ARC=y
 CONFIG_SOC_EM11D=y
 CONFIG_BOARD_EM_STARTERKIT=y
 CONFIG_BOARD_EM_STARTERKIT_R23=y
-CONFIG_SYS_CLOCK_TICKS_PER_SEC=1000
+CONFIG_SYS_CLOCK_TICKS_PER_SEC=100
 CONFIG_XIP=n
+CONFIG_BUILD_OUTPUT_BIN=n
 CONFIG_PRINTK=y
 CONFIG_CPU_ARCEM4=y
 CONFIG_CPU_ARCV2=y

boards/arc/em_starterkit/em_starterkit_em7d_defconfig

@@ -2,8 +2,9 @@ CONFIG_ARC=y
 CONFIG_SOC_EM7D=y
 CONFIG_BOARD_EM_STARTERKIT=y
 CONFIG_BOARD_EM_STARTERKIT_R23=y
-CONFIG_SYS_CLOCK_TICKS_PER_SEC=1000
+CONFIG_SYS_CLOCK_TICKS_PER_SEC=100
 CONFIG_XIP=n
+CONFIG_BUILD_OUTPUT_BIN=n
 CONFIG_PRINTK=y
 CONFIG_CPU_ARCEM4=y
 CONFIG_CPU_ARCV2=y

boards/arc/em_starterkit/em_starterkit_em7d_v22_defconfig

@@ -2,8 +2,9 @@ CONFIG_ARC=y
 CONFIG_SOC_EM7D=y
 CONFIG_BOARD_EM_STARTERKIT=y
 CONFIG_BOARD_EM_STARTERKIT_R22=y
-CONFIG_SYS_CLOCK_TICKS_PER_SEC=1000
+CONFIG_SYS_CLOCK_TICKS_PER_SEC=100
 CONFIG_XIP=n
+CONFIG_BUILD_OUTPUT_BIN=n
 CONFIG_PRINTK=y
 CONFIG_CPU_ARCEM4=y
 CONFIG_CPU_ARCV2=y