drivers: clock_control: rpi_pico: Make pinctrl-0 optional

ajf58 · ajf58 · commit 99644700a34f · 2024-11-29T21:55:45.000Z
No in-tree board uses this driver's pinctrl functionality, and every
RP2040-based board was configuring this to be an empty node in the
device tree, so remove them.

Signed-off-by: Andrew Featherstone &lt;andrew.featherstone@gmail.com&gt;
diff --git a/boards/adafruit/kb2040/adafruit_kb2040-pinctrl.dtsi b/boards/adafruit/kb2040/adafruit_kb2040-pinctrl.dtsi
@@ -48,9 +48,6 @@
 		};
 	};
 
-	clocks_default: clocks_default {
-	};
-
 	ws2812_pio0_default: ws2812_pio0_default {
 		ws2812 {
 			pinmux = <PIO0_P17>;
diff --git a/boards/adafruit/kb2040/adafruit_kb2040.dts b/boards/adafruit/kb2040/adafruit_kb2040.dts
@@ -56,11 +56,6 @@
 	};
 };
 
-&clocks {
-	pinctrl-0 = <&clocks_default>;
-	pinctrl-names = "default";
-};
-
 &uart0 {
 	current-speed = <115200>;
 	status = "okay";
diff --git a/boards/adafruit/qt_py_rp2040/adafruit_qt_py_rp2040-pinctrl.dtsi b/boards/adafruit/qt_py_rp2040/adafruit_qt_py_rp2040-pinctrl.dtsi
@@ -59,9 +59,6 @@
 		};
 	};
 
-	clocks_default: clocks_default {
-	};
-
 	ws2812_pio1_default: ws2812_pio1_default {
 		ws2812 {
 			pinmux = <PIO1_P12>;
diff --git a/boards/adafruit/qt_py_rp2040/adafruit_qt_py_rp2040.dts b/boards/adafruit/qt_py_rp2040/adafruit_qt_py_rp2040.dts
@@ -56,11 +56,6 @@
 	};
 };
 
-&clocks {
-	pinctrl-0 = <&clocks_default>;
-	pinctrl-names = "default";
-};
-
 &uart1 {
 	current-speed = <115200>;
 	status = "okay";
diff --git a/boards/raspberrypi/rpi_pico/rpi_pico-common.dtsi b/boards/raspberrypi/rpi_pico/rpi_pico-common.dtsi
@@ -89,11 +89,6 @@
 	};
 };
 
-&clocks {
-	pinctrl-0 = <&clocks_default>;
-	pinctrl-names = "default";
-};
-
 &uart0 {
 	current-speed = <115200>;
 	status = "okay";
diff --git a/boards/raspberrypi/rpi_pico/rpi_pico-pinctrl.dtsi b/boards/raspberrypi/rpi_pico/rpi_pico-pinctrl.dtsi
@@ -54,7 +54,4 @@
 			input-enable;
 		};
 	};
-
-	clocks_default: clocks_default {
-	};
 };
diff --git a/boards/seeed/xiao_rp2040/xiao_rp2040-pinctrl.dtsi b/boards/seeed/xiao_rp2040/xiao_rp2040-pinctrl.dtsi
@@ -57,9 +57,6 @@
 		};
 	};
 
-	clocks_default: clocks_default {
-	};
-
 	ws2812_pio0_default: ws2812_pio0_default {
 		ws2812 {
 			pinmux = <PIO0_P12>;
diff --git a/boards/seeed/xiao_rp2040/xiao_rp2040.dts b/boards/seeed/xiao_rp2040/xiao_rp2040.dts
@@ -86,11 +86,6 @@
 	};
 };
 
-&clocks {
-	pinctrl-0 = <&clocks_default>;
-	pinctrl-names = "default";
-};
-
 &timer {
 	status = "okay";
 };
diff --git a/boards/sparkfun/pro_micro_rp2040/sparkfun_pro_micro_rp2040-pinctrl.dtsi b/boards/sparkfun/pro_micro_rp2040/sparkfun_pro_micro_rp2040-pinctrl.dtsi
@@ -47,9 +47,6 @@
 		};
 	};
 
-	clocks_default: clocks_default {
-	};
-
 	ws2812_pio0_default: ws2812_pio_default {
 		ws2812 {
 			pinmux = <PIO0_P25>;
diff --git a/boards/sparkfun/pro_micro_rp2040/sparkfun_pro_micro_rp2040.dts b/boards/sparkfun/pro_micro_rp2040/sparkfun_pro_micro_rp2040.dts
@@ -58,11 +58,6 @@
 	};
 };
 
-&clocks {
-	pinctrl-0 = <&clocks_default>;
-	pinctrl-names = "default";
-};
-
 &uart0 {
 	current-speed = <115200>;
 	status = "okay";
diff --git a/boards/wiznet/w5500_evb_pico/w5500_evb_pico-pinctrl.dtsi b/boards/wiznet/w5500_evb_pico/w5500_evb_pico-pinctrl.dtsi
@@ -54,7 +54,4 @@
 			input-enable;
 		};
 	};
-
-	clocks_default: clocks_default {
-	};
 };
diff --git a/boards/wiznet/w5500_evb_pico/w5500_evb_pico.dts b/boards/wiznet/w5500_evb_pico/w5500_evb_pico.dts
@@ -112,11 +112,6 @@
 	};
 };
 
-&clocks {
-	pinctrl-0 = <&clocks_default>;
-	pinctrl-names = "default";
-};
-
 &uart0 {
 	current-speed = <115200>;
 	status = "okay";
diff --git a/drivers/clock_control/clock_control_rpi_pico.c b/drivers/clock_control/clock_control_rpi_pico.c
@@ -713,7 +713,7 @@ static int clock_control_rpi_pico_init(const struct device *dev)
 	}
 
 	ret = pinctrl_apply_state(config->pcfg, PINCTRL_STATE_DEFAULT);
-	if (ret < 0) {
+	if (ret < 0 && ret != -ENOENT) {
 		return ret;
 	}
 
