board: armfvp: Add more UART port configs

Add more UART port configs for ARM FVP.

Signed-off-by: Jaxson Han <[email protected]>

Author: povergoing

boards/arm/fvp_baser_aemv8r_aarch32/board.cmake

@@ -17,9 +17,23 @@ set(ARMFVP_FLAGS
   -C gic_distributor.GICD_CTLR-DS-1-means-secure-only=1
   -C gic_distributor.has-two-security-states=0
   -C bp.refcounter.non_arch_start_at_default=1
+  # UART0 config
   -C bp.pl011_uart0.out_file=-
   -C bp.pl011_uart0.unbuffered_output=1
   -C bp.terminal_0.start_telnet=0
+  # UART1 config
+  -C bp.pl011_uart1.out_file=-
+  -C bp.pl011_uart1.unbuffered_output=1
+  -C bp.terminal_1.start_telnet=0
+  # UART2 config
+  -C bp.pl011_uart2.out_file=-
+  -C bp.pl011_uart2.unbuffered_output=1
+  -C bp.terminal_2.start_telnet=0
+  # UART3 config
+  -C bp.pl011_uart3.out_file=-
+  -C bp.pl011_uart3.unbuffered_output=1
+  -C bp.terminal_3.start_telnet=0
+
   -C bp.vis.disable_visualisation=1
   -C bp.vis.rate_limit-enable=0
   )

boards/arm64/fvp_base_revc_2xaemv8a/board.cmake

@@ -8,9 +8,23 @@ set(ARMFVP_FLAGS
   -C bp.secure_memory=0
   -C cluster0.NUM_CORES=1
   -C bp.refcounter.non_arch_start_at_default=1
+  # UART0 config
   -C bp.pl011_uart0.out_file=-
   -C bp.pl011_uart0.unbuffered_output=1
   -C bp.terminal_0.start_telnet=0
+  # UART1 config
+  -C bp.pl011_uart1.out_file=-
+  -C bp.pl011_uart1.unbuffered_output=1
+  -C bp.terminal_1.start_telnet=0
+  # UART2 config
+  -C bp.pl011_uart2.out_file=-
+  -C bp.pl011_uart2.unbuffered_output=1
+  -C bp.terminal_2.start_telnet=0
+  # UART3 config
+  -C bp.pl011_uart3.out_file=-
+  -C bp.pl011_uart3.unbuffered_output=1
+  -C bp.terminal_3.start_telnet=0
+
   -C bp.vis.disable_visualisation=1
   -C bp.vis.rate_limit-enable=0
   -C gic_distributor.ARE-fixed-to-one=1

boards/arm64/fvp_baser_aemv8r/board.cmake

@@ -16,9 +16,23 @@ set(ARMFVP_FLAGS
   -C gic_distributor.GICD_CTLR-DS-1-means-secure-only=1
   -C gic_distributor.has-two-security-states=0
   -C bp.refcounter.non_arch_start_at_default=1
+  # UART0 config
   -C bp.pl011_uart0.out_file=-
   -C bp.pl011_uart0.unbuffered_output=1
   -C bp.terminal_0.start_telnet=0
+  # UART1 config
+  -C bp.pl011_uart1.out_file=-
+  -C bp.pl011_uart1.unbuffered_output=1
+  -C bp.terminal_1.start_telnet=0
+  # UART2 config
+  -C bp.pl011_uart2.out_file=-
+  -C bp.pl011_uart2.unbuffered_output=1
+  -C bp.terminal_2.start_telnet=0
+  # UART3 config
+  -C bp.pl011_uart3.out_file=-
+  -C bp.pl011_uart3.unbuffered_output=1
+  -C bp.terminal_3.start_telnet=0
+
   -C bp.vis.disable_visualisation=1
   -C bp.vis.rate_limit-enable=0
   )