boards: renesas: fix spelling of "available"

kartben · kartben · commit ad63f611c85b · 2025-02-19T18:51:13.000+01:00
s/avaialbe/available/

Signed-off-by: Benjamin Cabé &lt;benjamin@zephyrproject.org&gt;
diff --git a/boards/renesas/ek_ra4e2/doc/index.rst b/boards/renesas/ek_ra4e2/doc/index.rst
@@ -118,7 +118,7 @@ Flashing
 ========
 
 Program can be flashed to EK-RA4E2 via the on-board SEGGER J-Link debugger.
-SEGGER J-link's drivers are avaialbe at https://www.segger.com/downloads/jlink/
+SEGGER J-link's drivers are available at https://www.segger.com/downloads/jlink/
 
 To flash the program to board
 
diff --git a/boards/renesas/ek_ra4l1/doc/index.rst b/boards/renesas/ek_ra4l1/doc/index.rst
@@ -116,7 +116,7 @@ Flashing
 ========
 
 Program can be flashed to EK-RA4L1 via the on-board SEGGER J-Link debugger.
-SEGGER J-link's drivers are avaialbe at https://www.segger.com/downloads/jlink/
+SEGGER J-link's drivers are available at https://www.segger.com/downloads/jlink/
 
 To flash the program to board
 
diff --git a/boards/renesas/ek_ra4m1/doc/index.rst b/boards/renesas/ek_ra4m1/doc/index.rst
@@ -104,7 +104,7 @@ Flashing
 ========
 
 Program can be flashed to EK-RA4M1 via the on-board SEGGER J-Link debugger.
-SEGGER J-link's drivers are avaialbe at https://www.segger.com/downloads/jlink/
+SEGGER J-link's drivers are available at https://www.segger.com/downloads/jlink/
 
 To flash the program to board
 
diff --git a/boards/renesas/ek_ra4m2/doc/index.rst b/boards/renesas/ek_ra4m2/doc/index.rst
@@ -125,7 +125,7 @@ Flashing
 ========
 
 Program can be flashed to EK-RA4M2 via the on-board SEGGER J-Link debugger.
-SEGGER J-link's drivers are avaialbe at https://www.segger.com/downloads/jlink/
+SEGGER J-link's drivers are available at https://www.segger.com/downloads/jlink/
 
 To flash the program to board
 
diff --git a/boards/renesas/ek_ra4m3/doc/index.rst b/boards/renesas/ek_ra4m3/doc/index.rst
@@ -123,7 +123,7 @@ Flashing
 ========
 
 Program can be flashed to EK-RA4M3 via the on-board SEGGER J-Link debugger.
-SEGGER J-link's drivers are avaialbe at https://www.segger.com/downloads/jlink/
+SEGGER J-link's drivers are available at https://www.segger.com/downloads/jlink/
 
 To flash the program to board
 
diff --git a/boards/renesas/ek_ra4w1/doc/index.rst b/boards/renesas/ek_ra4w1/doc/index.rst
@@ -116,7 +116,7 @@ Flashing
 ========
 
 Program can be flashed to EK-RA4W1 via the on-board SEGGER J-Link debugger.
-SEGGER J-link's drivers are avaialbe at https://www.segger.com/downloads/jlink/
+SEGGER J-link's drivers are available at https://www.segger.com/downloads/jlink/
 
 To flash the program to board
 
diff --git a/boards/renesas/ek_ra6e2/doc/index.rst b/boards/renesas/ek_ra6e2/doc/index.rst
@@ -19,7 +19,7 @@ The key features of the EK-RA6E2 board are categorized in three groups as follow
 - MCU current measurement points for precision current consumption measurement
 - Multiple clock sources - RA6E2 MCU oscillator and sub-clock oscillator crystals,
   providing precision 20.000 MHz and 32,768 Hz reference clock.
-  Additional low precision clocks are avaialbe internal to the RA6E2 MCU
+  Additional low precision clocks are available internal to the RA6E2 MCU
 
 **System Control and Ecosystem Access**
 
@@ -116,7 +116,7 @@ Flashing
 ========
 
 Program can be flashed to EK-RA6E2 via the on-board SEGGER J-Link debugger.
-SEGGER J-link's drivers are avaialbe at https://www.segger.com/downloads/jlink/
+SEGGER J-link's drivers are available at https://www.segger.com/downloads/jlink/
 
 To flash the program to board
 
diff --git a/boards/renesas/ek_ra6m1/doc/index.rst b/boards/renesas/ek_ra6m1/doc/index.rst
@@ -118,7 +118,7 @@ Flashing
 ========
 
 Program can be flashed to EK-RA6M1 via the on-board SEGGER J-Link debugger.
-SEGGER J-link's drivers are avaialbe at https://www.segger.com/downloads/jlink/
+SEGGER J-link's drivers are available at https://www.segger.com/downloads/jlink/
 
 To flash the program to board
 
diff --git a/boards/renesas/ek_ra6m2/doc/index.rst b/boards/renesas/ek_ra6m2/doc/index.rst
@@ -17,7 +17,7 @@ The key features of the EK-RA6M2 board are categorized in three groups as follow
 - MCU and USB current measurement points for precision current consumption measurement
 - Multiple clock sources - RA6M2 MCU oscillator and sub-clock oscillator crystals,
   providing precision 12.000 MHz and 32,768 Hz reference clock.
-  Additional low precision clocks are avaialbe internal to the RA6M2 MCU
+  Additional low precision clocks are available internal to the RA6M2 MCU
 
 **System Control and Ecosystem Access**
 
@@ -110,7 +110,7 @@ Flashing
 ========
 
 Program can be flashed to EK-RA6M2 via the on-board SEGGER J-Link debugger.
-SEGGER J-link's drivers are avaialbe at https://www.segger.com/downloads/jlink/
+SEGGER J-link's drivers are available at https://www.segger.com/downloads/jlink/
 
 To flash the program to board
 
diff --git a/boards/renesas/ek_ra6m3/doc/index.rst b/boards/renesas/ek_ra6m3/doc/index.rst
@@ -17,7 +17,7 @@ The key features of the EK-RA6M3 board are categorized in three groups as follow
 - MCU and USB current measurement points for precision current consumption measurement
 - Multiple clock sources - RA6M3 MCU oscillator and sub-clock oscillator crystals,
   providing precision 24.000 MHz and 32,768 Hz reference clock.
-  Additional low precision clocks are avaialbe internal to the RA6M3 MCU
+  Additional low precision clocks are available internal to the RA6M3 MCU
 
 **System Control and Ecosystem Access**
 
@@ -120,7 +120,7 @@ Flashing
 ========
 
 Program can be flashed to EK-RA6M3 via the on-board SEGGER J-Link debugger.
-SEGGER J-link's drivers are avaialbe at https://www.segger.com/downloads/jlink/
+SEGGER J-link's drivers are available at https://www.segger.com/downloads/jlink/
 
 To flash the program to board
 
diff --git a/boards/renesas/ek_ra6m4/doc/index.rst b/boards/renesas/ek_ra6m4/doc/index.rst
@@ -21,7 +21,7 @@ The key features of the EK-RA6M4 board are categorized in three groups as follow
 - MCU current measurement points for precision current consumption measurement
 - Multiple clock sources - RA6M4 MCU oscillator and sub-clock oscillator crystals,
   providing precision 24.000 MHz and 32,768 Hz reference clock.
-  Additional low precision clocks are avaialbe internal to the RA6M4 MCU
+  Additional low precision clocks are available internal to the RA6M4 MCU
 
 **System Control and Ecosystem Access**
 
@@ -125,7 +125,7 @@ Flashing
 ========
 
 Program can be flashed to EK-RA6M4 via the on-board SEGGER J-Link debugger.
-SEGGER J-link's drivers are avaialbe at https://www.segger.com/downloads/jlink/
+SEGGER J-link's drivers are available at https://www.segger.com/downloads/jlink/
 
 To flash the program to board
 
diff --git a/boards/renesas/ek_ra6m5/doc/index.rst b/boards/renesas/ek_ra6m5/doc/index.rst
@@ -17,7 +17,7 @@ The key features of the EK-RA6M5 board are categorized in three groups as follow
 - MCU current measurement points for precision current consumption measurement
 - Multiple clock sources - RA6M5 MCU oscillator and sub-clock oscillator crystals,
   providing precision 24.000 MHz and 32,768 Hz reference clock.
-  Additional low precision clocks are avaialbe internal to the RA6M5 MCU
+  Additional low precision clocks are available internal to the RA6M5 MCU
 
 **System Control and Ecosystem Access**
 
@@ -125,7 +125,7 @@ Flashing
 ========
 
 Program can be flashed to EK-RA6M5 via the on-board SEGGER J-Link debugger.
-SEGGER J-link's drivers are avaialbe at https://www.segger.com/downloads/jlink/
+SEGGER J-link's drivers are available at https://www.segger.com/downloads/jlink/
 
 To flash the program to board
 
diff --git a/boards/renesas/ek_ra8d1/doc/index.rst b/boards/renesas/ek_ra8d1/doc/index.rst
@@ -17,7 +17,7 @@ The key features of the EK-RA8D1 board are categorized in three groups as follow
 - MCU current measurement points for precision current consumption measurement
 - Multiple clock sources - RA8D1 MCU oscillator and sub-clock oscillator crystals,
   providing precision 20.000MHz and 32,768 Hz refeence clocks.
-  Additional low precision clocks are avaialbe internal to the RA8D1 MCU
+  Additional low precision clocks are available internal to the RA8D1 MCU
 
 **System Control and Ecosystem Access**
 
@@ -156,7 +156,7 @@ Flashing
 ========
 
 Program can be flashed to EK-RA8D1 via the on-board SEGGER J-Link debugger.
-SEGGER J-link's drivers are avaialbe at https://www.segger.com/downloads/jlink/
+SEGGER J-link's drivers are available at https://www.segger.com/downloads/jlink/
 
 To flash the program to board
 
diff --git a/boards/renesas/ek_ra8m1/doc/index.rst b/boards/renesas/ek_ra8m1/doc/index.rst
@@ -17,7 +17,7 @@ The key features of the EK-RA8M1 board are categorized in three groups as follow
 - MCU current measurement points for precision current consumption measurement
 - Multiple clock sources - RA8M1 MCU oscillator and sub-clock oscillator crystals,
   providing precision 20.000MHz and 32,768 Hz refeence clocks.
-  Additional low precision clocks are avaialbe internal to the RA8M1 MCU
+  Additional low precision clocks are available internal to the RA8M1 MCU
 
 **System Control and Ecosystem Access**
 
@@ -138,7 +138,7 @@ Flashing
 ========
 
 Program can be flashed to EK-RA8M1 via the on-board SEGGER J-Link debugger.
-SEGGER J-link's drivers are avaialbe at https://www.segger.com/downloads/jlink/
+SEGGER J-link's drivers are available at https://www.segger.com/downloads/jlink/
 
 To flash the program to board
 
diff --git a/boards/renesas/fpb_ra4e1/doc/index.rst b/boards/renesas/fpb_ra4e1/doc/index.rst
@@ -102,7 +102,7 @@ Flashing
 ========
 
 Program can be flashed to FPB-RA4E1 via the on-board SEGGER J-Link debugger.
-SEGGER J-link's drivers are avaialbe at https://www.segger.com/downloads/jlink/
+SEGGER J-link's drivers are available at https://www.segger.com/downloads/jlink/
 
 To flash the program to board
 
diff --git a/boards/renesas/fpb_ra6e1/doc/index.rst b/boards/renesas/fpb_ra6e1/doc/index.rst
@@ -103,7 +103,7 @@ Flashing
 ========
 
 Program can be flashed to FPB-RA6E1 via the on-board SEGGER J-Link debugger.
-SEGGER J-link's drivers are avaialbe at https://www.segger.com/downloads/jlink/
+SEGGER J-link's drivers are available at https://www.segger.com/downloads/jlink/
 
 To flash the program to board
 
diff --git a/boards/renesas/fpb_ra6e2/doc/index.rst b/boards/renesas/fpb_ra6e2/doc/index.rst
@@ -20,7 +20,7 @@ The key features of the FPB-RA6E2 board are categorized in three groups as follo
 - MCU current measurement point for precision current consumption measurement
 - Multiple clock sources - RA6E2 MCU oscillator and sub-clock oscillator crystals,
   providing precision 24.000 MHz and 32,768 Hz reference clock.
-  Additional low precision clocks are avaialbe internal to the RA6E2 MCU
+  Additional low precision clocks are available internal to the RA6E2 MCU
 
 **System Control and Ecosystem Access**
 
@@ -103,7 +103,7 @@ Flashing
 ========
 
 Program can be flashed to fpb-RA6E2 via the on-board SEGGER J-Link debugger.
-SEGGER J-link's drivers are avaialbe at https://www.segger.com/downloads/jlink/
+SEGGER J-link's drivers are available at https://www.segger.com/downloads/jlink/
 
 To flash the program to board
 
diff --git a/boards/renesas/mck_ra8t1/doc/index.rst b/boards/renesas/mck_ra8t1/doc/index.rst
@@ -131,7 +131,7 @@ Flashing
 ========
 
 Program can be flashed to MCB-RA8T1 via the on-board SEGGER J-Link debugger.
-SEGGER J-link's drivers are avaialbe at https://www.segger.com/downloads/jlink/
+SEGGER J-link's drivers are available at https://www.segger.com/downloads/jlink/
 
 To flash the program to board
 
diff --git a/boards/renesas/voice_ra4e1/doc/index.rst b/boards/renesas/voice_ra4e1/doc/index.rst
@@ -90,7 +90,7 @@ Flashing
 ========
 
 Program can be flashed to VOICE-RA4E1 via the on-board SEGGER J-Link debugger.
-SEGGER J-link's drivers are avaialbe at https://www.segger.com/downloads/jlink/
+SEGGER J-link's drivers are available at https://www.segger.com/downloads/jlink/
 
 To flash the program to board
 
