dts: arm: st: c0: add spi node in dtsi file

- stm32cO11/31 share the same spi peripheral

- include stm32_dma header to be able to configure
spi with dma config macros (STM32_DMA_PERIPH_TX,...)
in dts

Signed-off-by: Fabrice DJIATSA <[email protected]>

Author: djiatsaf-st

dts/arm/st/c0/stm32c0.dtsi

@@ -9,6 +9,7 @@
 #include <zephyr/dt-bindings/adc/adc.h>
 #include <zephyr/dt-bindings/clock/stm32c0_clock.h>
 #include <zephyr/dt-bindings/gpio/gpio.h>
+#include <zephyr/dt-bindings/dma/stm32_dma.h>
 #include <zephyr/dt-bindings/i2c/i2c.h>
 #include <zephyr/dt-bindings/pwm/pwm.h>
 #include <zephyr/dt-bindings/pwm/stm32_pwm.h>
@@ -301,6 +302,16 @@
 			status = "disabled";
 		};
 
+		spi1: spi@40013000 {
+			compatible = "st,stm32-spi-fifo", "st,stm32-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x40013000 0x400>;
+			clocks = <&rcc STM32_CLOCK(APB1_2, 12U)>;
+			interrupts = <25 0>;
+			status = "disabled";
+		};
+
 		adc1: adc@40012400 {
 			compatible = "st,stm32-adc";
 			reg = <0x40012400 0x400>;