doc: silabs: fix J-Link firmware update instructions

J-Link firmware images for silabs boards are not distributed by
SEGGER, fw update should be done with Simplicity Studio instead.

Signed-off-by: Daniel Fuchs <[email protected]>

Author: vulpes2

boards/silabs/dev_kits/sltb004a/doc/index.rst

@@ -142,7 +142,7 @@ Programming and Debugging
 
 .. note::
    Before using the kit the first time, you should update the J-Link firmware
-   from `J-Link-Downloads`_
+   in Simplicity Studio.
 
 Flashing
 ========
@@ -199,6 +199,3 @@ the following message:
 
 .. _J-Link:
    https://www.segger.com/jlink-debug-probes.html
-
-.. _J-Link-Downloads:
-   https://www.segger.com/downloads/jlink

boards/silabs/dev_kits/sltb009a/doc/index.rst

@@ -101,7 +101,7 @@ Programming and Debugging
 
 .. note::
    Before using the kit the first time, you should update the J-Link firmware
-   from `J-Link-Downloads`_
+   in Simplicity Studio.
 
 Flashing
 ========
@@ -152,6 +152,3 @@ terminal session:
 
 .. _J-Link:
    https://www.segger.com/jlink-debug-probes.html
-
-.. _J-Link-Downloads:
-   https://www.segger.com/downloads/jlink

boards/silabs/dev_kits/xg24_dk2601b/doc/index.rst

@@ -111,7 +111,7 @@ Programming and Debugging
 
 .. note::
    Before using the kit the first time, you should update the J-Link firmware
-   from `J-Link-Downloads`_
+   in Simplicity Studio.
 
 Flashing
 ========
@@ -171,6 +171,3 @@ this example.
 
 .. _BRD2601B User Guide:
    https://www.silabs.com/documents/public/user-guides/ug524-brd2601b-user-guide.pdf
-
-.. _J-Link-Downloads:
-   https://www.segger.com/downloads/jlink

boards/silabs/radio_boards/slwrb4321a/doc/index.rst

@@ -112,7 +112,7 @@ Programming and Debugging
 
 .. note::
    Before using the kit the first time, you should update the J-Link firmware
-   from `J-Link-Downloads`_
+   in Simplicity Studio.
 
 Flashing
 ========
@@ -172,6 +172,3 @@ terminal session:
 
 .. _J-Link:
    https://www.segger.com/jlink-debug-probes.html
-
-.. _J-Link-Downloads:
-   https://www.segger.com/downloads/jlink

boards/silabs/starter_kits/efm32wg_stk3800/doc/index.rst

@@ -99,7 +99,7 @@ Programming and Debugging
 
 .. note::
    Before using the kit the first time, you should update the J-Link firmware
-   from `J-Link-Downloads`_
+   in Simplicity Studio.
 
 Flashing
 ========
@@ -162,6 +162,3 @@ the following message:
 
 .. _J-Link:
    https://www.segger.com/jlink-debug-probes.html
-
-.. _J-Link-Downloads:
-   https://www.segger.com/downloads/jlink

boards/silabs/starter_kits/slstk3400a/doc/index.rst

@@ -100,7 +100,7 @@ Programming and Debugging
 
 .. note::
    Before using the kit the first time, you should update the J-Link firmware
-   from `J-Link-Downloads`_
+   in Simplicity Studio.
 
 Flashing
 ========
@@ -162,6 +162,3 @@ Reset the board and you will see this message written to the serial port:
 
 .. _J-Link:
    https://www.segger.com/jlink-debug-probes.html
-
-.. _J-Link-Downloads:
-   https://www.segger.com/downloads/jlink

boards/silabs/starter_kits/slstk3401a/doc/index.rst

@@ -111,7 +111,7 @@ Programming and Debugging
 
 .. note::
    Before using the kit the first time, you should update the J-Link firmware
-   from `J-Link-Downloads`_
+   in Simplicity Studio.
 
 Flashing
 ========
@@ -174,6 +174,3 @@ terminal session:
 
 .. _J-Link:
    https://www.segger.com/jlink-debug-probes.html
-
-.. _J-Link-Downloads:
-   https://www.segger.com/downloads/jlink

boards/silabs/starter_kits/slstk3402a/doc/index.rst

@@ -134,7 +134,7 @@ Programming and Debugging
 
 .. note::
    Before using the kit the first time, you should update the J-Link firmware
-   from `J-Link-Downloads`_
+   in Simplicity Studio.
 
 Flashing
 ========
@@ -200,6 +200,3 @@ terminal session:
 
 .. _J-Link:
    https://www.segger.com/jlink-debug-probes.html
-
-.. _J-Link-Downloads:
-   https://www.segger.com/downloads/jlink

boards/silabs/starter_kits/slstk3701a/doc/index.rst

@@ -123,7 +123,7 @@ Programming and Debugging
 
 .. note::
    Before using the kit the first time, you should update the J-Link firmware
-   from `J-Link-Downloads`_
+   in Simplicity Studio.
 
 Flashing
 ========
@@ -186,6 +186,3 @@ terminal session:
 
 .. _J-Link:
    https://www.segger.com/jlink-debug-probes.html
-
-.. _J-Link-Downloads:
-   https://www.segger.com/downloads/jlink

boards/sparkfun/thing_plus_matter_mgm240p/doc/index.rst

@@ -100,7 +100,7 @@ Programming and Debugging
 
 .. note::
    Before using the kit the first time, you should update the J-Link firmware
-   from `J-Link-Downloads`_
+   in Simplicity Studio.
 
 Flashing
 ========
@@ -163,6 +163,3 @@ this example.
 
 .. _MGM240P Schematics:
    https://cdn.sparkfun.com/assets/0/f/8/4/9/Thing_Plus_MGM240P.pdf
-
-.. _J-Link-Downloads:
-   https://www.segger.com/downloads/jlink