boards: shields: rtkmipilcdb00000be: update shield doc

Correct doc formatting
Remove platform specific hardware configuration

Signed-off-by: The.Thanh Nguyen <[email protected]>

Author: thanhthe23

boards/shields/rtkmipilcdb00000be/doc/index.rst

@@ -14,19 +14,19 @@ This display uses a 26 pin connector header.
 Pins Assignment of the Renesas RTKMIPILCDB00000BE MIPI Display
 ==============================================================
 
-+-----------------------+------------------------+
++----------------------+-------------------------+
 | Connector Pin        | Function                |
-+=======================+========================+
++======================+=========================+
 | 14                   | Touch ctrl I2C SDA      |
-+-----------------------+------------------------+
++----------------------+-------------------------+
 | 15                   | Display backlight enable|
-+-----------------------+------------------------+
++----------------------+-------------------------+
 | 16                   | Touch ctrl I2C SCL      |
-+-----------------------+------------------------+
++----------------------+-------------------------+
 | 17                   | External interrupt      |
-+-----------------------+------------------------+
++----------------------+-------------------------+
 | 18                   | Display reset           |
-+-----------------------+------------------------+
++----------------------+-------------------------+
 
 Hardware Requirements:
 **********************
@@ -35,19 +35,6 @@ Supported Renesas RA boards: EK-RA8D1
 - 1 x RA Board
 - 1 x Micro USB cable
 
-Hardware Configuration:
-***********************
-
-The MIPI Graphics Expansion Port (J58) connects the EK-RA8D1 board to the MIPI Graphics Expansion Board
-supplied as part of the kit.
-
-Set the configuration switches (SW1) as below to avoid potential failures.
-		+-------------+-------------+--------------+------------+------------+------------+-------------+-----------+
-		| SW1-1 PMOD1 | SW1-2 TRACE | SW1-3 CAMERA | SW1-4 ETHA | SW1-5 ETHB | SW1-6 GLCD | SW1-7 SDRAM | SW1-8 I3C |
-		+-------------+-------------+--------------+------------+------------+------------+-------------+-----------+
-		|     OFF     |     OFF     |      OFF     |     OFF    |     OFF    |     ON     |     ON      |    OFF    |
-		+-------------+-------------+--------------+------------+------------+------------+-------------+-----------+
-
 Programming
 ***********