QUAD SPI building error STM32H745

[xavierpacheco-eaton]

I'm getting the following issue when building

C:/.../build/zephyr/include/generated/devicetree_generated.h:22316:39: error: 'DT_N_S_soc_S_quadspi_52005000_S_qspi_nor_flash_0_REG_IDX_1_VAL_ADDRESS' undeclared here 
(not in a function); did you mean 'DT_N_S_soc_S_quadspi_52005000_S_qspi_nor_flash_0_REG_IDX_0_VAL_ADDRESS'?
22316 | #define DT_N_INST_0_st_stm32_qspi_nor DT_N_S_soc_S_quadspi_52005000_S_qspi_nor_flash_0

Anyone familiar with this type of error? This happened after switching from Zephyr v3.2.0 to v3.6.0 so maybe some definitions changed or got messed up?

[FRASTM]

@xavierpacheco-eaton
The stm32h745 was introduced by the #72510
It seems that it did not exists in the zephyr 3.6.0
Could you set a more recent zephyr release ?
For example with Zephyr v3.7.0 rc3

west build  -p auto -b stm32h745i_disco//m7 samples/drivers/spi_flash ; west flash
*** Booting Zephyr OS build v3.7.0-rc3 ***                                      
                                                                                
qspi-nor-flash-1@90000000 SPI flash testing                                     
==========================                                                      
                                                                                
Perform test on single sector                                                   
Test 1: Flash erase                                                             
Flash erase succeeded!                                                          
                                                                                
Test 2: Flash write                                                             
Attempting to write 4 bytes                                                     
Data read matches data written. Good!!                                          
                                                                                
Perform test on multiple consecutive sectors                                    
Test 1: Flash erase                                                             
Flash erase succeeded!                                                          
                                                                                
Test 2: Flash write                                                             
Attempting to write 4 bytes at offset 0xff000                                   
Data read matches data written. Good!!                                          
Attempting to write 4 bytes at offset 0x100000                                  
Data read matches data written. Good!!