diff --git a/boards/arm/rak5010_nrf52840/Kconfig.defconfig b/boards/arm/rak5010_nrf52840/Kconfig.defconfig
index f640e81927e10..e42682979f107 100644
--- a/boards/arm/rak5010_nrf52840/Kconfig.defconfig
+++ b/boards/arm/rak5010_nrf52840/Kconfig.defconfig
@@ -8,6 +8,9 @@ if BOARD_RAK5010_NRF52840
 config BOARD
 	default "rak5010_nrf52840"
 
+config MODEM_QUECTEL_BG9X
+	default y
+
 if USB
 
 config USB_NRFX
diff --git a/boards/arm/rak5010_nrf52840/rak5010_nrf52840.dts b/boards/arm/rak5010_nrf52840/rak5010_nrf52840.dts
index 61f301dcc58a8..005583b88f04f 100644
--- a/boards/arm/rak5010_nrf52840/rak5010_nrf52840.dts
+++ b/boards/arm/rak5010_nrf52840/rak5010_nrf52840.dts
@@ -12,11 +12,11 @@
 	compatible = "nordic,rak5010_nrf52840";
 
 	chosen {
-		zephyr,console = &uart0;
-		zephyr,shell-uart = &uart0;
-		zephyr,uart-mcumgr = &uart0;
-		zephyr,bt-mon-uart = &uart0;
-		zephyr,bt-c2h-uart = &uart0;
+		zephyr,console = &uart1;
+		zephyr,shell-uart = &uart1;
+		zephyr,uart-mcumgr = &uart1;
+		zephyr,bt-mon-uart = &uart1;
+		zephyr,bt-c2h-uart = &uart1;
 		zephyr,sram = &sram0;
 		zephyr,flash = &flash0;
 		zephyr,code-partition = &slot0_partition;
@@ -54,20 +54,31 @@
 
 &uart0 {
 	compatible = "nordic,nrf-uart";
-	current-speed = <115200>;
 	status = "okay";
-	tx-pin = <33>;
-	rx-pin = <34>;
+	current-speed = <115200>;
+	tx-pin = <6>;
+	rx-pin = <8>;
+	rts-pin = <7>;
+	cts-pin = <11>;
+
+	/* QUECTEL BG9X */
+	quectel_bg9x: quectel_bg9x {
+		compatible = "quectel,bg9x";
+		label = "quectel,bg9x";
+		mdm-power-gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+		mdm-reset-gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
+		mdm-dtr-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
+		mdm-wdisable-gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
+		status = "okay";
+	};
 };
 
 &uart1 {
 	compatible = "nordic,nrf-uart";
-	status = "okay";
 	current-speed = <115200>;
-	tx-pin = <8>;
-	rx-pin = <6>;
-	rts-pin = <7>;
-	cts-pin = <11>;
+	status = "okay";
+	tx-pin = <33>;
+	rx-pin = <34>;
 };
 
 &i2c1 {
diff --git a/drivers/modem/quectel-bg9x.c b/drivers/modem/quectel-bg9x.c
index 20c93a3db6849..cefc0352e5992 100644
--- a/drivers/modem/quectel-bg9x.c
+++ b/drivers/modem/quectel-bg9x.c
@@ -907,6 +907,12 @@ static void pin_init(void)
 {
 	LOG_INF("Setting Modem Pins");
 
+#if DT_INST_NODE_HAS_PROP(0, mdm_wdisable_gpios)
+	LOG_INF("Deactivate W Disable");
+	modem_pin_write(&mctx, MDM_WDISABLE, 0);
+	k_sleep(K_MSEC(250));
+#endif
+
 	/* NOTE: Per the BG95 document, the Reset pin is internally connected to the
 	 * Power key pin.
 	 */
diff --git a/drivers/modem/quectel-bg9x.h b/drivers/modem/quectel-bg9x.h
index 4b48703a7aa43..794ad5ae70f1e 100644
--- a/drivers/modem/quectel-bg9x.h
+++ b/drivers/modem/quectel-bg9x.h
@@ -65,6 +65,9 @@ enum mdm_control_pins {
 #if DT_INST_NODE_HAS_PROP(0, mdm_dtr_gpios)
 	MDM_DTR,
 #endif
+#if DT_INST_NODE_HAS_PROP(0, mdm_wdisable_gpios)
+	MDM_WDISABLE,
+#endif
 };
 
 /* driver data */
@@ -135,6 +138,12 @@ static struct modem_pin modem_pins[] = {
 		  DT_INST_GPIO_PIN(0, mdm_dtr_gpios),
 		  DT_INST_GPIO_FLAGS(0, mdm_dtr_gpios) | GPIO_OUTPUT_LOW),
 #endif
+#if DT_INST_NODE_HAS_PROP(0, mdm_wdisable_gpios)
+	/* MDM_WDISABLE */
+	MODEM_PIN(DT_INST_GPIO_LABEL(0, mdm_wdisable_gpios),
+		  DT_INST_GPIO_PIN(0, mdm_wdisable_gpios),
+		  DT_INST_GPIO_FLAGS(0, mdm_wdisable_gpios) | GPIO_OUTPUT_LOW),
+#endif
 };
 
 #endif /* #ifndef QUECTEL_BG9X_H */
diff --git a/dts/bindings/modem/quectel,bg9x.yaml b/dts/bindings/modem/quectel,bg9x.yaml
index a46db597bd67d..516161c522bcd 100644
--- a/dts/bindings/modem/quectel,bg9x.yaml
+++ b/dts/bindings/modem/quectel,bg9x.yaml
@@ -22,3 +22,7 @@ properties:
     mdm-dtr-gpios:
       type: phandle-array
       required: false
+
+    mdm-wdisable-gpios:
+      type: phandle-array
+      required: false